• The Journal of the Korean dental association
• /
• v.21 no.5 s.168
• /
• pp.395-402
• /
• 1983

The purpose of this study was to apply the etched metal ceramometal retainer using a composite resin and acid-etch procedure with minimal tooth reduction of abutments for the replacement of one missing anterior or posterior tooth. Author obtained the following conclusions. 1. conservation of tooth structure and minimal chair time and patient expense were the primary advantages of etched metal retainer. 2. This fixed partial denture permitted good esthetic results. 3. This retainer was successfully applied for the replacement of one missing anterior or posterior tooth. 4. Proper retainer etching ws an important procedure. 5. Etched castings could be applied to periodontal splinting and post orthodontic fixation.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.16-26
• /
• 2014

Materials that can be use in CAD/CAM are composite, ceramic, hybrid and metal. Among the available materials, monolithic ceramic technique which is the manufacturing technique using one type of the materials is mainly used in a dental office. It is the technique where final tooth-shaped prostheses are made from the material block and used after polishing or applying heat and that does not require traditional ceramic build-up process. Although shot of esthetic quality, because manufactured within 1 hour the monolithic ceramic technique has advantages such as that treatment can be completed in one day and in one time visit, that stability of the material is high because there are low possibility of distort by not melting and phase transformation, and that it can be easily worked in the office with computer assisted devices. We classified the materials that can be used in this technique based on their generations from clinical stand point.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.99-104
• /
• 2023

Trace elements (TEs) have significant effects on both dental health and human health. Toxic effects are caused by deficiency or excess of TEs. This study was performed to determine levels of toxic and trace elements in incisor and molar teeth sampled from male and female participants residing in the north and south regions of Sudan. The tooth enamel of 18 extracted human teeth was analyzed using particle-induced x-ray emission (µ-PIXE) to determine its elemental profile and distribution. GeoPIXEII software package was used for the analysis of µ-PIXE data. The main elements determined were Na, Mg, P, S, Cl, K, Ca, Mn, Fe, Zn, Co, and Sr which were homogeneously distributed in the areas of the tooth enamel mapped with micro-PIXE.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.14 no.1
• /
• pp.57-62
• /
• 2014

Background: The aim of this study was to analyze outpatient anesthesia for dental treatment in handicapped patients with behavior disorder in order to use data for carrying out better and safe anesthetic management. Methods: The data were drawn from the 100 patients with behavior disorder who visited CNUDH dental clinic for disabled based on anesthesia record to investigate patient's systemic condition, cooperative level, anesthesia method according to patients cooperation, and side effects after recovery time. Results: Mental retardation (58%) is the most reason to choose general anesthesia. The methods of induction according to cooperative level are intravenous propofol injection in 22 cases and inhalation of sevoflurane in 78 cases. Induction time of anesthesia were within 10 seconds in cases of propofol induction and average $48.8{\pm}18.5$ seconds in cases of inhalation induction. The time spent on dental treatment was average $3.2{\pm}1.1$ hours. After the end of treatment, average time to move from unit chair to recovery bed, to recliner, and to discharge from hospital are $10.4{\pm}5.1$, $36.9{\pm}17.1$ and $72.4{\pm}16.0$ minutes, respectively. During recovery, there are nausea with 9%, vomiting with 4%, dizziness with 2%, finger injury with 1%. Conclusions: This study showed our successful anesthetic outcomes without any severe side effects or complications. Through this study, it will be used for safe anesthetic management as useful reference data.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.383-392
• /
• 2015

Dental chair unit (DCU) is the most essential equipment for the dental treatment in dentistry. DCU output water is used for various applications during dental treatment. DCU output water must be clean at the same level as drinking water since patients and dental staff are regularly exposed to water and aerosols generated from the DCU. Many studies demonstrated that DCU output water is frequently contaminated with microorganisms including opportunistic pathogen such as Legionella and Pseudomonas species. Thus, DCU output water may be a potential source of infection. In order to reduce microbial contamination levels in DCU output water, periodic management and continuous disinfection are necessary. Currently, there are a variety of disinfection methods for managing DCU output water and its efficacy is also diverse. We reviewed the level of microbial contamination, clinical implications of contaminated DCU output water and the various DCU disinfection methods.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.323-328
• /
• 2015

PURPOSE. This in-vitro study was designed to evaluate retention forces, microleakage and plastic deformation of a prefabricated 2-implant bar attachment system (SFI-Bar, Cendres+$M{\acute{e}}taux$, Switzerland). MATERIALS AND METHODS. Two SFI implant-adapters were torqued with 35 Ncm into two implant analogues. Before the tube bars were finally sealed, the inner cavity of the tube bar was filled with liquid red dye to evaluate microleakage. As tube bar sealing agents three different materials were used (AGC Cem (AGC, resin based), Cervitec Plus (CP; varnish) and Gapseal (GS; silicone based). Four groups with eight specimens each were tested (GS, GS+AGC, AGC, CP). For cyclic loading, the attachment system was assembled parallel to the female counterparts in a chewing simulator. The mean retention forces of the initial and final ten cycles were statistically evaluated (ANOVA, ${\alpha}{\leq}.05$). RESULTS. All groups showed a significant loss of retention forces. Their means differed between 30-39 N initially and 22-28 N after 50,000 loading cycles. No significant statistical differences could be found between the groups at the beginning (P=.224), at the end (P=.257) or between the loss of retention forces (P=.288). Microleakage occurred initially only in some groups but after 10,000 loading cycles all groups exhibited microleakage. CONCLUSION. Long-term retention forces of the SFI-Bar remained above 20 N which can be considered clinically sufficient. The sealing agents in this study are not suitable to prevent microleakage.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.4
• /
• pp.685-693
• /
• 2012

Objectives : This research was conducted to find the subjective symptoms of musculoskeletal system for main jobs and job posture. Methods : A survey was conducted from September 15, 2011 to October 7, 2011 and 357 dental hygienists were responded. The survey was consisted of the working environment and medical equipments, psycho-social characteristics, health habits and education, job posture, subjective symptoms of musculoskeletal system pain, and so on. Results : In the survey on the frequency of job posture of dental hygienists by jobs, said they cast down or tilt their head by 15 degrees or more or twist or bend their back. The result of the analysis on the subjective symptoms of musculoskeletal system by main job showed that they experienced a pain in neck, shoulder, and back, although the order differed. The order of subjective symptoms of musculoskeletal system for casting down or turning head by 15 degrees or more, twisting or bending back, having shoulders not parallel to the ground, sitting at the end of a chair, and supporting the whole body with one leg or pressing on a pedal for treatment was from the shoulders to the neck to the back. The order of subjective symptoms of musculoskeletal system for having arms too far from the body or hunching for treatment and bending wrists inward or outward for treatment was from the shoulders to the back to the neck. Conclusions : Due to the characteristics of the job which requires one to have a proper view of a patient's oral cavity, most of the postures included casting down of head or bending of back. Therefore a development of new postures is needed to replace the existing job postures which pressure the musculoskeletal system. And shift rotation can be used as a preventive measure.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.259-270
• /
• 2023

PURPOSE. This study evaluated the reliability of the chair-side CAD-CAM surgical guide (CSG) in the anterior maxilla by comparing its accuracy with the laboratory 3D-printed surgical guide (3DSG) and manual surgical guide (MSG) concerning different levels of dentists' surgical experience. MATERIALS AND METHODS. Ten surgical guides of each type (MSG, 3DSG, and CSG) were fabricated on a control study model with missing right and left central incisors. Sixty implants were placed in 30 study models by two dentists (one inexperienced and one experienced) using three different types of surgical guides. Horizontal deviations at shoulder and at apex, vertical, and angular deviations were measured after superimposing the planned and placed implant positions in the software. Kruskal-Wallis and Mann-Whitney U tests were used to compare the accuracy of three types of surgical guides in each dentist group and the accuracy of each surgical guide between two dentists (α = .05). RESULTS. There were no significant differences in any deviations between CSG and 3DSG, apart from angular deviation, for both dentists' groups. Moreover, both CSG and 3DSG showed no significant differences in accuracy between the two dentists (P > .05). In contrast, MSG demonstrated significant differences from CSG and 3DSG and a significant difference in accuracy between the two dentists (P < .05). CONCLUSION. CSG provides superior accuracy to MSG in implant placement in the maxillary anterior region and is comparable to 3DSG at different levels of surgical experience, while offering the benefits of shorter manufacturing time and reduced patient visits.

• Journal of Korean Dental Science
• /
• v.2 no.1
• /
• pp.4-10
• /
• 2009

Though implant treatment is considered as a common treatment option for edentulous patients, there have been few studies on the temporomandibular disorder (TMD) related with implant treatment. The purposes of this study were to evaluate the relevance of TMD to the implant patients and to evaluate the risk factors of TMD in relation with implant treatment. For the evaluation of various risk factors of TMD in relation with implant therapy, clinical evaluation focused on patient factors and implant factors. From a group of 694 patients, 25 patients (3.6 %) were included in this study. The majority of the patients were included in the asymptomatic 'adaptive' group. Parafunction was detected in 11 patients, 8 patients were male. Four patients having parafunction showed complications such as implant failure or fracture of the suprastructure. From the results, it is possible that TMJ related symptoms are developed or aggravated after implant therapy, which requires relatively more chair time; so TMJ examination should be included in the pre-operative evaluation for dental implant patients. Also, it is important to treat patients after they sign an informed consent that includes a detailed explanation on the possibility of TMD during treatment.

• The Journal of the Korean dental association
• /
• v.57 no.9
• /
• pp.529-533
• /
• 2019

Recently, an advanced workflow has been introduced to finish implant surgery and prosthetic treatment in one-day. However, Because of 1. Patient's physical condition, 2. Surgical technique, 3. Digital technical limitations, the complete completion of one-day implant treatment is practically difficult. Therefore, this paper proposes a "two-days implant digital workflow" that short-time implant surgery and restores prosthetics the next day. Even though it takes more than one day, this workflow is a realistic implant treatment protocol that can reduce the chair time in the clinic.