• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.273-281
• /
• 2013

Purpose: This study was performed to evaluate the general anatomy and morphology of the nasopalatine canal using cone-beam computed tomography (CBCT) and to determine the human anatomic variability of the nasopalatine canal in relation to age and gender. Materials and Methods: The study included 100 subjects aged between 20 and 86 years who were divided into the following 3 groups: 1) 20-34 years old; 2) 35-49 years old; 3) ${\geq}50$ years old. The subjects were equally distributed between the genders. CBCT was performed using a standard exposure and patient positioning protocol. The data of the CBCT images were sliced in three dimensions. Image planes on the three axes (X, Y, and Z) were sequentially analyzed for the location, morphology and dimensions of the nasopalatine canal by two independent observers. The correlation of age and gender with all the variables was evaluated. Results: The present study did not reveal statistically significant differences in the number of openings at the nasal fossa; diameter of the nasal fossa openings; diameter of the incisive fossa; shape, curvature, and angulation of the canal as viewed in the sagittal sections; antero-posterior dimensions and length of the canal in the sagittal sections; or the level of division of the canal in the coronal plane by age. However, males and females showed significant differences in the length of the canal in the sagittal sections and level of the division of the canal in the coronal plane. Conclusion: The present study highlighted important variability observed in the anatomy and morphology of the nasopalatine canal.

• Journal of Oral Medicine and Pain
• /
• v.44 no.2
• /
• pp.59-64
• /
• 2019

Purpose: The aim of this study was to analyse and evaluate the morphology of the articular eminence of temporomandibular joint in young Korean adults using cone-beam computed tomography (CBCT). Methods: One hundred seventy-one subjects (59 males, 112 females) in the 20s were examined using CBCT. Width and height of articular eminence, top-roof line angle, best-fit line angle, joint space were measured. For the group comparisons, independent t-test was used with the level of significance established at $p{\leq}0.05$. Results: In asymptomatic young Korean adults, average eminence width was $9.49{\pm}1.62mm$ in males and $9.33{\pm}1.36mm$ in females. Average eminence height was $7.23{\pm}1.81mm$ in males and $6.82{\pm}1.31mm$ in females. Average eminence inclination of measured by top-roof line angle was $37.09^{\circ}{\pm}7.74^{\circ}$ in males and $36.12^{\circ}{\pm}5.65^{\circ}$ in females. Average eminence inclination measured by best-fit line angle was $50.79^{\circ}{\pm}11.49^{\circ}$ in males and $48.43^{\circ}{\pm}9.05^{\circ}$ in females. Average joint space was $3.03{\pm}0.67mm$ in males and $2.63{\pm}0.68mm$ in females. Conclusions: Increasing age did not affect the morphology of the articular eminence in asymptomatic young Korean adults. Males had slightly larger eminence width, height, top-roof line angle, best-fit line angle and joint space, but no statistical significance (p>0.05) was observed only in the joint space (p=0.001). There was no side-to-side difference in morphology (p>0.05).

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.105-114
• /
• 2021

Objective: The purpose of this study was to evaluate the relationship between rotational disk displacement (DD) of the temporomandibular joint (TMJ) and the dentoskeletal morphology. Methods: Women aged > 17 years were included in this study. Each subject had a primary complaint of malocclusion and underwent routine cephalometric examinations. They were divided into five groups according to the findings on sagittal and coronal magnetic resonance images of their TMJs: bilateral normal disk position, bilateral anterior DD with reduction (ADDR), bilateral rotational DD with reduction (RDDR), bilateral anterior DD without reduction (ADDNR), and bilateral rotational DD without reduction (RDDNR). Twenty-three cephalometric variables were analyzed, and the Kruskal-Wallis test was used to evaluate differences in the dentoskeletal morphology among the five groups. Results: Patients with TMJ DD exhibited a hyperdivergent pattern with a retrognathic mandible, unlike those with a normal disk position. These specific skeletal characteristics were more severe in patients exhibiting DD without reduction than in those with reduction, regardless of the presence of rotational DD. Rotational DD significantly influenced horizontal and vertical skeletal patterns only in the stage of DD with reduction, and the mandible exhibited a more backward position and rotation in patients with RDDR than in those with ADDR. However, there were no significant dentoskeletal differences between ADDNR and RDDNR. Conclusions: The results of this study suggest that rotational DD of TMJ plays an important role in the dentoskeletal morphology, particularly in patients showing DD with reduction.

• Restorative Dentistry and Endodontics
• /
• v.45 no.1
• /
• pp.3.1-3.10
• /
• 2020

Objectives: This study investigated the indirect effect of calcium-enriched mixture (CEM) cement and mineral trioxide aggregate (MTA), as 2 calcium silicate-based hydraulic cements, on human dental pulp stem cells (hDPSCs) through different dentin thicknesses. Materials and Methods: Two-chamber setups were designed to simulate indirect pulp capping (IPC). Human molars were sectioned to obtain 0.1-, 0.3-, and 0.5-mm-thick dentin discs, which were placed between the 2 chambers to simulate an IPC procedure. Then, MTA and CEM were applied on one side of the discs, while hDPSCs were cultured on the other side. After 2 weeks of incubation, the cells were removed, and cell proliferation, morphology, and attachment to the discs were evaluated under scanning electron microscopy (SEM). Energy-dispersive X-ray (EDXA) spectroscopy was performed for elemental analysis. Alkaline phosphatase (ALP) activity was assessed quantitatively. The data were analyzed using the Kruskal-Wallis and Mann-Whitney tests. Results: SEM micrographs revealed elongated cells, collagen fibers, and calcified nucleations in all samples. EDXA verified that the calcified nucleations consisted of calcium phosphate. The largest calcifications were seen in the 0.1-mm-thick dentin subgroups. There was no significant difference in ALP activity across the CEM subgroups; however, ALP activity was significantly lower in the 0.1-mm-thick dentin subgroup than in the other MTA subgroups (p < 0.05). Conclusions: The employed capping biomaterials exerted biological activity on hDPSCs, as shown by cell proliferation, morphology, and attachment and calcific precipitations, through 0.1- to 0.5-mm-thick layers of dentin. In IPC, the bioactivity of these endodontic biomaterials is probably beneficial.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.154-163
• /
• 2006

Tooth morphology is the most important scientific aspect of dental medicine in regards to the treatment and study of teeth attrition relating to the absence of teeth due to dental caries or the occlusion of teeth due to external force. Most of the studies have focused on the external morphology in cutting teeth regardless of sex and age. However, the importance of internal morphology in the treatment of damaged teeth has been increased. Therefore, this study established the measurement criteria for the morphology of the mandibular first premolar which had never been presented, in order to investigate the external and internal morphologies of mandibular first premolars, and introduced a non-destructive method such as a microcomputed tomogrphy. Mandibular first premolars in superlative state were taken from molars of middle aged males and females and used as specimens for this study. Criteria relating to the internal and external morphology measurements were established to quantify the length of the teeth in identical state. Two dimensional image data for the selected mandibular first premolar were obtained by taking the image of each O.022mm section, which is perpendicular to the vertical direction using the microcomputed tomography. The Vworks program was applied to measure the length of each morphological part according to the set measurement criteria. These measured data were compared with the data presented by G. V. Black and the internal and external morphologies of the teeth of middle aged Koreans were also compared according to gender. In addition, the methodology for measurement of the mandibular first premolar was presented and according to this, the standardized mandibular first premolars of middle aged Korean males and females were made by using a rapid prototyping system.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.55-66
• /
• 2009

This research collected the curriculum for Dental Technology from a total of 20 schools --3-year colleges and 4-year colleges-- all in Korea. And we analyzed the average credits of subjects from students. As a result of this analysis, we get the conclusion below: 1. In the arithmetic mean of the major basis subjects which graduates and undergraduates answered about each subjects; Seminar, Dental morphology I II, Dental morphology practice I II, and Dental devices & instruments don't have many credits. And averages of the major application subjects credits which are Implants(especially low), Occlusal anatomy practice I II, Dental ceramics practice I II, and Dental ceramics practice are low, mostly have a converged tendency in high points. 2. In an analysis of the correlation which is based on the major basis subjects: Dental esthetic, oral anatomy I II, Dental materal practice III, Dental casting pracedure, Oral hygiene, Health & medical law, Management administration, and Medical terminology have a meaningful difference. (${\rho}$ < 0.05) 3. In an analysis of the correlation which is based on the major application subjects; Crown and bridge prosthodontics practice IV, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Dental ceramics I II, Dental ceramics practice I II, Dental ceramics practice IIII, Occlusal anatomy I II, Occlusal anatomy practice I, Operative dentistry laboratory technology I, Operative dentistry laboratory technology practice II, Dental attachment laboratory technology practice, Implants, and Dental laboratory clinical practice have meaningful difference. (${\rho}$ < 0.05) 4. In an analysis of the correlation which is based on the ratio of a theory to an actual training; 40:60(38.57%) is the highest, followed by 30:70(30.04%), 50:50(23.32%), 60:40(5.83%), and 70:30(2.24%). These have meaningful difference. (${\rho}$ < 0.05) 5. In an analysis of the correlation which is based on the distinction of sex: Partial denture prosthodontics practice I II III, Complete denture prosthodontics I II III, Complete denture prosthodontics practice I II III, Occlusal anatomy practice I II, Implants, Medical terminology have meaningful difference. (${\rho}$ < 0.05) For the purpose of training entrepreneurs of middle standing who is required by a future society, Department of Dental Technology's Curriculum need to be managed with planning a curriculum which reflects opinions of graduates, undergraduates and a society, and also are considered not focusing on a supplier but focusing on a user.

• The Journal of the Korean dental association
• /
• v.54 no.2
• /
• pp.142-148
• /
• 2016

본 연구의 목적은 특이한 C형 치근과 근관을 가지고 있는 상악 제 1대구치의 근관치료 증례를 콘빔단층촬영을 사용하여 진단 및 치료하였음을 보고하는 것이다. 본 증례에서는 특이적인 해부학적 근관 형태가 콘빔단층촬영을 사용하여 확인되었으며 비외과적 근관치료가 시행되었다. 촬영한 영상에서 모든 치근이 C 형태로 융합되어 있으며 독립적인 4개의 근관을 포함하고 있음이 관찰되었다. C형 근관계의 복잡성을 고려할 때 콘빔단층촬영이 적절한 근관계의 확인과 의원성 손상을 예방하기 위해 유용한 보조적 방법인 것으로 보여진다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.141-141
• /
• 2015

In this study, a series of hydroxyaptite (HAp) are produced on Ti dental implant using electrochemical deposition. Based on the preliminary analysis of the coating structure, composition and morphology. In vitro studies were performed with MC3T3-E1 cell to investigate the effect of biological change on different surface conditions.

• The Journal of the Korean dental association
• /
• v.57 no.11
• /
• pp.708-713
• /
• 2019

Chronic obstructive inflammatory disease of salivary glands is the most frequent disease of the salivary glands and is characterized by recurrent swelling and pain caused by pressure. Sialography is recommended for the diagnosis of obstructive sialadenitis to observe changes in duct morphology, such as stricture and dilatation. Intraductal irrigation using normal saline is a simple treatment for patients with chronic obstructive inflammatory disease by removing the microlith and mucous plugs in the duct. It can be used as a conservative treatment option for resolving the obstructive symptoms.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.241-252
• /
• 2022

The purpose of this study was to evaluate the relationship between sella turcica morphology and delayed dental age. In total, 389 participants under 16 years old were selected. Dental age was evaluated by the Demirjian method and age discrepancy (AD), the value subtracted from dental age to chronological age, was calculated. The participants were divided into 8 groups based on the sella turcica type. Bridging ratio (BR) was defined as interclinoid distance divided by sella turcica length to determine the degree of sella turcica bridging (STB) and the participants were classified into 4 groups by BR. The data were statistically analyzed using the Kruskal Wallis test and the Mann Whitney test. Some groups with sella turcica abnormality showed lower AD than that of the normal group and the AD differences varied from 4 months to 1.3 year. As the STB severity increased, AD decreased. AD differences varied from 7 months to 1.19 year. No distinct differences were observed in sella turcica type and STB groups according to sex. The results indicate that sella turcica morphology is associated with delayed dental age. Sella turcica can be used as a supplementary indicator to predict dental development.