• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.237-245
• /
• 2016

Purpose: The purpose of this study is to investigate the analysis blended learning interesting and satisfaction on students majoring in dental techniques. Method: The study subject were 181 students from Gimcheon university. Data for this survey was obtain by self-administration method. This questionnaire consist of $lecture^{\circ}$Øs interesting and satisfaction when using an blended learning in the lecture. SPSS 22.0 was used. Analysis of frequency was used and two sammple t-test was used to identify significantly different blended interesting and sataisfaction within the grade. Multiple regression was used to which interestings affect the satisfaction. Results: First, there were significant differences in the grade among the blended interesting and sataisfaction, while on differences in participation satisfaction(p<0.05). Second, The correlation coefficient is 0.714 between blended interesting and staisfaction, Third, Multiple regression showed that the $lecture^{\circ}$Øs interesting applying blended learning affects the satisfaction(p<0.05). Conclusion: Given the findings of the study, lecture applying blended learning seem to be efficient education programs to improve lecture's interesting & satisfaction.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.95-101
• /
• 2020

본 연구는 비판적 사고성향, 문제해결능력, 대학생활적응의 융합적 관계를 규명하고, 대학생활적응에 미치는 영향을 파악하고자 하였다. 설문 조사는 충북과 전북에 소재한 3년제 치기공과에 재학 중인 2,3학년 학생 172명을 대상으로 시행하였다. 분석결과 연구대상자의 비판적 사고성향은 3.50, 문제해결능력은 3.55, 대학생활적응은 3.27으로 나타났다. 대학생활적응에 가장 큰 영향을 미치는 요인은 비판적 사고성향이었으며, 전공만족도, 대학만족도 순이었다. 치기공과 학생들의 대학생활에 적응 수준을 높이기 위해서 비판적 사고성향을 증진시키고, 전공과 대학만족도를 높일 수 있는 교육환경 개선과 다양한 교육프로그램 개발이 필요할 것이다.

• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.5-12
• /
• 2000

The gaps between the die margin worked and the casting body were measured with an optical microscope and compared after making crown prosthetic materials using three kinds of die material - dental stone, extra hard stone, epoxy resin - used in crown prosthesis. The results are as follows : 1. All the gaps between the cast cervical margin and the casting bodies were relatively good regardless of die materials used with the gaps under $50{\mu}m$, the allowable limit. 2. The cervical margin suitability of epoxy resin die was the highest among the three kinds of die material with the suitability value of $30.28{\pm}12.67$. 3. Among the four surfaces(buccal, lingual, mesial, distal) of all the casting bodies, buccal surface was the highest in the cervical margin suitability with the value of $25.93{\pm}15.51$.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.123-130
• /
• 1999

I attempted to suggest a better method to separate a refractory cast in order to solve the problems caused by bonding between refractory casts and ceramics in the firing-processing of all ceramic crowns as a part of dental prosthodontics. I emphasize the advantages and effectiveness of easy separation after firing by using the separating materials about the refractory cast dies. 1. We must not usse HF(55%) that is used as the chemical separating methods. 2. We decrease such methods as grinding, blasting, bur, and point 3. We can save time, costs and manual labors by using this methods. 4. This method regulates the expansion and constriction of heat because of the chemical reaction of the separating materials. 5. This method contribute to the breaking down without modification by minimizing the chemical and mechanical damages of the marginal and interior parts.

• 대한치과기공학회지
• /
• 제44권4호
• /
• pp.144-153
• /
• 2022

Purpose: This study examines the influence and the relevance of personal background factors, social activity factors, and satisfaction factors for university education of college students in terms of changes in core competencies required by companies, so as to provide basic data for developing a curriculum necessary for improving core competencies. Methods: A self-administered questionnaire survey was administered to 172 college students from the Department of Dental Laboratory Technology at K University in Gangwon Province, who understood the purpose of this study and agreed to participate, from September 10, 2022 to September 30, 2022. Results: 1. The core competency scores of university students in the dental technology department for teamwork was 3.91±0.65, creativity was 3.66±0.70, challenging spirit was 3.64±0.74, professionalism was 3.54±0.74, global was 3.29±0.69. 2. To enhance the core competencies of college students in the dental technology department, it is necessary to improve the satisfaction with the curriculum through the expansion of educational infrastructure, and help in the career decision and preparation process. Conclusion: It is necessary to seek research that identifies the core competencies of dental technicians and university students based on the image of human resources desired by companies in a more diverse way and programs necessary to promote them.

• 대한치과의료관리학회지
• /
• 제11권1호
• /
• pp.28-37
• /
• 2023

In this study, in order to analyze the effects of dental technology students' degree of satisfaction with their major and sense of self-esteem on college life stress, we conducted a self-administered questionnaire for 270 dental technology students. conducted a frequency analysis, t-test, one-way ANOVA, correlation analysis, and multiple regression analysis, and the results are as follows. As a result of analyzing the degree of major satisfaction, there was a significant difference in the department satisfaction (p<.05). The average score in major satisfaction was relatively high at 3.68. As a result of analyzing the level of self-esteem, there was a significant difference in grade and department satisfaction (p<.05). The average score in self-esteem question was relatively high at 3.75. As a result of analyzing the level of college life stress, there was a significant difference in the department satisfaction (p<.05). The average score for each college life stress area was relatively low at 1.97. As a result of analyzing the correlation between college life stress, major satisfaction, and self-esteem, college life stress was found to have a significant negative (-) correlation with major satisfaction and self-esteem. As a result of a regression analysis conducted on the effect of self-esteem and major satisfaction on college life stress, the variable that most influenced college life stress was found to be the self-esteem factor.

• 대한치과기공학회지
• /
• 제43권2호
• /
• pp.69-69
• /
• 2021

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.83-96
• /
• 2018

Purpose: The purpose of this study was to examine the influence of dental technicians sense of work ethics on their organizational effectiveness such as job satisfaction and organizational citizenship behavior. Methods: A self-administered survey was conducted from August 25 to September 15, 2017, on 220 selected dental technicians. The collected data were analyzed by SPSS Win 19.0. Statistical data on frequency and percentage were obtained, and t-test, one-way ANOVA, correlation analysis and regression analysis were carried out. Results: When the subjects' sense of work ethics was analyzed, there were significant differences according to their field of work, position, dental technician career and monthly income(p<.05). Their average score in the items about a sense of work ethics was 3.80, which was a high score. As a result of analyzing the organizational effectiveness of the dental technicians, there were significant differences according to their field of work, position, dental technician career and monthly income(p<.05). The average score in job satisfaction items was 3.14, and that in organizational citizenship behavior items was 3.55. Conclusion : As a result of research, the above-mentioned findings of the study imply that as for the correlation between a sense of work ethics and organizational effectiveness, a better sense of work ethics led to better organizational effectiveness, as every variable had a significant positive correlation with each other. In addition, interpersonal relationships were identified as the factor that exerted the largest influence on both of job satisfaction and organizational citizenship behavior.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.173-185
• /
• 2020

Purpose: The purpose of this study was to investigate dental technicians' awareness of infections and to enhance their interest and commitment towards infection prevention. Methods: A self-reported questionnaire survey was conducted among dental technicians. Total of 195 responses were used for analysis. A cross-tabulation analysis was used to compare dental technicians' awareness of infections according to their levels of education on infection prevention (α=0.05). Results: Dental technicians were educated on infection prevention (40.5%). Most participants received infection prevention education from school (29.8%). Dental laboratories had an infection control guideline (34.9%). Dental technicians were not aware of infection risks at their workplaces or believed that they were not at risk of infections at their workplaces (59.3%). Conclusion: Dental technicians must be consistently educated on infection prevention and control through systematic education at school and wider promotion through media. Research is needed to economically and efficiently improve equipment used by dental technicians and to protect them from infectious diseases. A budget for infection prevention must also be determined. Institutional measures such as providing support for dental technicians at the policy level and developing a basic infection prevention manual are necessary. Solving these issues not only protects dental technicians from infections but also allows them to provide high-quality medical services.

• 대한치과기공학회지
• /
• 제33권3호
• /
• pp.227-236
• /
• 2011

Purpose: The purpose of this study was to reduce the remake rate of dental prosthesis. We examined remake cause and major factor of dental prosthesis to determine methods for raising dental prosthesis satisfaction. Methods: Subjects included dental technicians in the metropolitan areas of the cities of Daegu and Gyeong-buk. Surveys were filled out by consenting dental technicians. Statistical analysis was done using SPSS version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using t-tests, analysis of variance. Results: Impression or material transform is high among remake cause and margin is high among remake major factor. Crown class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Porcelain class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Denture class showed differences in General characteristics associated with age, monthly salaray, and career. Implant class showed differences in General characteristics associated with age, education, and career. Conclusion: In order to reduce remake rate of dental prosthesis, communication of dentist, dental technician, and the patient are require and correct information of patient and dental prosthesis are need.