• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.121-128
• /
• 2020

Purpose: This study aimed to investigate the effects of the sintering conditions of zirconia core on the adaptability. Methods: Ten specimens of each of commercial brand of zirconia(Razor 1100, U&C international, Seoul, Korea) were made and sintered under three different conditions. Specimens were divided into three subgroup(n=10) and sintered with various total time(1hr, 3hr, 9hr) at the maximum temperature(1500℃). The digitized data was superimposed with 3D inspection software to quantitatively obtain the adaptation of a zirconia core, and visual differences were confirmed with a color map. The root mean square(RMS) values of group were statistically analyzed with one-way ANOVA(α=0.05). Results: The overall adaptation of the zirconia cores were as follows; ss-1hr: 36.18±5.2㎛, ss-3hr: 39.55±3.9㎛, cs-9hr: 46.62±4.3㎛. They were statistically significant differences between groups for adaptation(p<0.05). Conclusion: Based on the results of this study, it could be considered that sintering condition of 1500℃ and 1~3 hour is recommended for the better marginal and internal fit. Speed sintering can be widely utilized to fabricate zirconia prothesis as the properties of those almost are to dentistry uses.

• Biomedical Science Letters
• /
• v.13 no.4
• /
• pp.341-347
• /
• 2007

Streptococcus mutans, one of a major causal agents of dental caries, is component of the dental plaque and produces various organic acids such as lactic acid as the end-product of glycolysis. In this study, we isolated S. mutans from Korean children with caries and also investigated the expression of protein under acid stress. S. mutans was identified at the species level using a 16S ribosomal DNA sequencing comparison method. The primer specificity was tested on eleven S. mutans strains isolated from Korean children with caries. The data showed that eleven strains are S. mutans. At treatment of concentration of 20 mM lactic acid in the mid-log phage, K-7 exhibited the highest maximum culture OD compared with those of other groups. As a consequence, we examined the expression of protein under 20 mM lactic acid stress using S. mutans K-7. The results of 2D gel electrophoresis by image analysis showed that thirteen proteins are up-regulated under the stress. Further study is being focused on amino acid analysis by mass spectrometry in order to analyze those spots.

• The Korean Journal of Health Service Management
• /
• v.8 no.2
• /
• pp.221-232
• /
• 2014

This research aims to improve oral health knowledge through oral health education by investigating and analyzing the effect of subjective oral health knowledge and oral health behavior on personal oral hygiene management ability targeted for adults who visited a dental hygiene laboratory at B University in Busan for comprehensive dental hygiene management and procedure from September 23, 2013 to December 12, 2013, and provide basic data to improve adults' personal oral hygiene management ability by inducing behavior on oral health. Results derived from the research are as follows. Oral health education is a prerequisite to improve personal oral hygiene management ability through improvement in oral health knowledge and oral health behavior, which leads to improved personal oral health and furthermore promotion of national oral health through not just simply transmitting oral health knowledge, but desirable change in oral health behavior based on oral health knowledge.

• Journal of Technologic Dentistry
• /
• v.41 no.3
• /
• pp.203-209
• /
• 2019

Purpose: The purpose of this study was to investigate the mechanical properties of polymer prosthetic and restorative materials for dental CAD/CAM using two test method; surface characteristics and shear bond strength. Methods: Commercialized CAD/CAM polymer blanks were investigated; One kinds of PMMA, and one PEKK blanks. A total of 20 PMMA and PEKK specimens were prepared, and each group was divided into 10 specimens. Average surface roughness was observed under surface profilometer. The contact angle was measured with a surface electrooptics. The bond strength was evaluated by a universal testing machine at a crosshead speed of 5mm/min. The data were statistically analyzed using independent t-test and Fisher's exact test(P<0.05). Results: The PMMA and PEKK group showed a significant difference in the shear bond strength with the composite resin(P<0.05). The surface roughness of the PEKK group was higher than that of the PMMA group. The fracture mode were observed in PEKK groups with 50% showing adhesive remnant index score. Conclusion: PEEK is used as substructure material and composite veneering material is applied. PEKK resins will contribute to the development of successful products that will provide structural and aesthetic satisfaction.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.118-125
• /
• 2022

Purpose: The color of dental zirconia is very important in terms of aesthetics. To reproduce the color tone, a colorant is applied to zirconia to express the color tone. I would like to point out that the color, brightness, and saturation of the colorant used to express the color A3 may vary depending on the manufacturer. Methods: Each zirconia block received a total of 25 circular specimens for the experiment. The zirconia specimen was then deposited by colorant type to reproduce the color tone. Color differences and translucency were measured using a spectrophotometer. To compare and analyze the zirconia color according to the type of colorant, one-way ANOVA was used. Results: For each type of zirconia colorant, there was no statistically significant difference in translucency or b^* (p>0.05). There was a statistical difference in L^* and a^* (p<0.05). Conclusion: The ΔE^*ab (D65) value is less than 5.5 or less, and the color difference is within an acceptable range.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.37-54
• /
• 2009

The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.17-34
• /
• 2007

This study was conducted to research into the recognition level of employment and overseas employment on 173 students majoring in dental technology at two colleges in Daegu metropolitan city and Jeju self-governing island through questionnaires which are recorded individually. The results are as follows. 1. About 31.8% students chose dental technician department taking their aptitude into consideration when they entered college. 52% students gained information about dental technology through internet, and 57.3% students among them, which was the highest level, were under age 20. 2. 48.6% students responded that they thought the level of satisfaction with major was average and there was a difference according to their ages among the level of satisfaction or dissatisfaction with their major and the previous knowledge of major they had gained before entering college. 75.1% students said they wouldn't transfer to other major even if they were given the chance, which was much higher than the opposite case. And only 2.3% students had dissatisfaction at their major, which means students majoring dental technology evaluate their major positively. 3. Most students(58.4%) wanted to get a job for living cost and 53.2% students took advice from their seniors or elderly people in choosing their jobs. 64.7% students answered they should have professional skills to get a good job, which was different according to their ages. In addition, 51.4% students of dental technology department regarded the opportunities to exert their abilities as the most important element in choosing their jobs. That means students value self-decision and selfrealization when they choose their jobs. 4. The majority of students(32.9%) preferred to work at the dental laboratory in dental college hospital as their workplace. Moreover, seniors over age 21 wanted to work in the field of porcelain and juniors under age 20 preferred to work in the implant part concerning the field which students wants to work. 5. About 91.3% students have ever heard about overseas employment and wanted to work abroad if given the opportunities(77.5%). This points out students have much interest in overseas employment and positive attitude. And there was a difference according to age and grade in case of the preferred country when they work abroad 6. The main barrier to overseas employment was a lack of communication ability(63.0%), therefore, students thought foreign language education should be activated to improve overseas employment(26.0%). To show this more specifically, juniors thought foreign language education and internship are most important factors(both are 21.4% alike), while seniors thought foreign language education is essential(24.6%) as a way to improve overseas employment. Students also thought that participation in language study club helps to prepare for overseas employment(69.4%). When putting all these survey results together, it's very important to develop people in advance who have job ability and language ability necessary for overseas employment as well as to improve job awareness in the field of dental technology. Consequently, it's needed to seek for various ways to get a overseas job through foreign language education and overseas internship.

• Journal of Technologic Dentistry
• /
• v.41 no.4
• /
• pp.295-301
• /
• 2019

Purpose: This study is for the prosthesis of dogs. Observe the occlusal relation between the dog's canine and carnassial teeth. The strength and the direction of the occlusal by 3D FEM analysis. Methods: The mandibular canine and carnassial of dogs were tested. The dog's skull was contact point confirmed by dental CAD. The skull of the dog was 3D modeled by CT. The 3D model was analyzed by ABAQUS. Opening and closing movement has been a force of 100N, 200N, 300N, 500N, 1000N, 1,500N. The peak von Mises stress distribution was confirmed. Results: As occlusal force increased, stress appeared to 1.34 MPa, 3.32 MPa, 5.00 MPa, 6.19 MPa, 5.58 MPa, 5.47 MPa in left canine. and Stress was seen at 2.10 MPa, 3.08 MPa, 3.89 MPa, 5.50 MPa, 7.04 MPa, 7.18 MPa in the right canine. Stress appeared at 2.41 MPa, 3.53 MPa, 5.15 MPa, 7.28 MPa, 31.26 MPa, 67.22 MPa in the left carnassial. and Stress was seen at 1.57 MPa, 2.96 MPa, 3.76 MPa, 6.01 MPa, 20.94 MPa, 64.38 MPa in the right carnassial. Conclusion: Peak von Mises stress values were found at the peak of the canine, the buccal of the central cusp of the carnassial, and the occlusal surface of the distal cusp.

• Journal of Technologic Dentistry
• /
• v.38 no.3
• /
• pp.111-117
• /
• 2016

Purpose: The present study was performed to investigate the effect of abutment inclined angle on the marginal fit of zirconia all-ceramic crown. Methods: The Ti abutments with 3 different inclined angle($2^{\circ}$, $4^{\circ}$ and $6^{\circ}$) were fabricated. The zirconia copings were fabricated for each abutment by using dental CAD/CAM system. The manufactured zirconia copings were duplicated through silicone replica technique, and a replicated specimen was sectioned in the center of bucco-lingual and mesio-distal axial to measure the marginal fit by using a stereo microscope. The results were analyzed using a one-way ANOVA with SPSS 22.0 for Windows(${\alpha}=0.05$). Results: On the bucco-lingual axial, marginal fit was the RL3($41.5{\pm}3.4{\mu}m$), RL2($44.3{\pm}4.3{\mu}m$) and RL1($47.5{\pm}5.7{\mu}m$), respectively. On the mesio-distal axial, marginal fit was the RL3($41.1{\pm}3.7{\mu}m$), RL2($45.7{\pm}5.3{\mu}m$) and RL1($46.2{\pm}4.5{\mu}m$), respectively. One-way ANOVA showed statistically significant difference between groups for marginal fit(p<0.05). Conclusion: For marginal fit of the abutments inclined angle, RL3 specimen was superior. The abutment inclined angle had influence on marginal fit of the zirconia copings. The marginal fit of each group were within clinically acceptable range.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.255-262
• /
• 2016

Purpose: This study examined the effect of wettability of gypsum materials and rubber impression material on the marginal fitness of zirconia copings. Methods: Three commercially available gypsum materials(Fugirock EP, Snow Rock, Tuff Rock) and three zirconia blocks(iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent) were studied. The zirconia copings were fabricated by using dental CAD/CAM system. Contact angles on the impression materials were measured with contact angle measuring device. Silicone replica method was used to measure the marginal fitness and cutting was performed on the bucco-lingual and mesio-distal sides. It were observed with a stereomicroscope at °ø40 magnification. The data were statistically analyzed with One-way ANOVA. Results: Mean values of contact angles were $58.3{\pm}0.7^{\circ}$ for Tuff Rock, $77.5{\pm}0.5^{\circ}$ for Fugirock EP and $87.8{\pm}0.5^{\circ}$ for Snow Rock and the difference between them was statistically significant(p<0.05). The smallest values of marginal fitness for the JF groups were $30.7{\pm}3.0{\mu}m$ for bucco-lingual direction, $29.3{\pm}3.0{\mu}m$ for mesio-distal direction. One-way ANOVA showed statistically significant difference between groups for marginal fitness(p<0.05). Conclusion: Tuff rock gypsum material had superior wettability to others. The mean marginal fitness of the Tuff rock gypsum material group were significantly better than other groups. Thus they can be also expected to show clinically satisfactory marginal fitness.