• Journal of Technologic Dentistry
• /
• v.39 no.4
• /
• pp.263-273
• /
• 2017

Purpose: This study aimed to explore the relations between class distracting factors and class satisfaction of the dental technology students and then provide a primary data to help further related studies and develop educational programs with which instructors can efficiently manage their classroom. Methods: For this study we have conducted a survey started from the beginning of May 2017 to the end of June. The subjects of the survey were Dental Technology students of D-city, K-city, W-city, selected by random sampling method. The questionnaire was self-administrated and 437 valid results were chosen for our analysis among 450 distributed questionnaires. Results: The results of the research was as follows. Firstly, The overall average point of class distracting factors was 2.5 point. The environmental factors were the highest point as 2.59 and as for the subcategories tiredness and drowsiness was the highest point as 2.76. Secondly, The overall average point of class satisfaction turned out 3,88 point and compliance with class and attitude factors gained the highest point as 4.06. Of the subcategories strict roll checking was the highest point as 4.17. Thirdly, As for class distracting factors from general characteristics a statistical significance was shown as follows; 'instructor factor'(p<.01), 'learner factor'(p<.05), 'total class distracting factor'(p<.05) in the area of gender, 'environmental factor'(p<.001), 'total class distracting factor'(p<.01), 'learner factor'(p<.05), 'instructor factor'(p<.05) in the area of gender 'learner factor'(p<.001), 'instructor factor'(p<.001), 'environmental factor'(p<.001), 'total class distracting factor'(p<.01) in the area of class grade, 'environmental factor'(p<.05) in GPA. Fourthly, A statistical significance, a negative correlation (p<.01) were shown between class distracting factors and class satisfaction. Class distracting factor that especially affects the class satisfaction was instructor factor(p<.001) and the explanatory power of the model turned out 14.7%, which was statistically meaningful (p<.001). Conclusion : Results of this study reveal that instructor factor is the key to class satisfaction of the students. So it is crucial that the instructor faithfully prepare for the class to reinforce the students' learning. Additionally further studies should be followed with more subjects and newer perspectives to develop innovative teaching methodology.

• Journal of Technologic Dentistry
• /
• v.38 no.2
• /
• pp.57-62
• /
• 2016

Purpose: The purpose of this study was to assess precision of crown prostheses that were fabricated by using 2 kinds of bur or 3 kinds of bur. Methods: The crowns were fabricated by using the first molar of the right maxillary in this study. The abutments that were prepared were scanned by using a scanner and designed by using CAD software. Based on the crown design, NC data were created with CAM software. The created NC data were used while fabricating the crown prostheses by using 5-axis milling machine. Scanning was done for the internal and external surface of the completed crown prostheses and 3-dimensional measurement was conducted for precision assessment. Results: The $RMS{\pm}SD$ value for the external surface of the crown prostheses that was fabricated by using two burs and three burs were $28.5{\pm}4.1{\mu}m$ and $19.1{\pm}2.8{\mu}m$, respectively; and the value for two burs were bigger than that for three burs with statistical significance (p<0.001). The $RMS{\pm}SD$ value for the internal surface of the crown prostheses that was fabricated by using two burs and three burs were $14.9{\pm}1.9{\mu}m$ and $13.3{\pm}2.5{\mu}m$, respectively; and the value for two burs were bigger than that for three burs but with no statistical significance. Conclusion: Based on this study, the prostheses that were fabricated by using 3 bur presented better stability compared to those that were fabricated by using 2 bur and statistically significant difference was found only in the external surface.

• Journal of Technologic Dentistry
• /
• v.31 no.4
• /
• pp.15-23
• /
• 2009

The aim of this study was to evaluate the bond strength of using a Au bonding agent applied on cp-Ti and nonprecious metal-gold-ceramic system. Metallic frameworks(diameter: 5mm, height: 20mm)(N=56, n=7per group) cast in Ni-Cr alloy, Co-Cr alloy and cp-Ti were obtained using acrylic templates and airborne particle abraded with $110{\mu}m$ aluminum oxide. Au bonding agent was applied on wash opaque firing as intermediate layer. SEM and SEM/EDS line profile were performed on the cutting the cross-section of the metal substrate-porcelain with intermediate Au coating. Groups were tested using shear bond strength(SBS) testing at 0.5mm/min. The mean SBS values for the ceramic-Au layer-metal combination were significantly higher than those ceramic-metal combination. While ceramic-Au layer-cp-Ti combinations failed to increase bond strength instead of using a titanium bonding porcelain. The appication of using Au intermediate layer significantly improve the bond strength combination with metal-ceramic system.

• Journal of Technologic Dentistry
• /
• v.43 no.3
• /
• pp.84-92
• /
• 2021

Purpose: The purpose of this study was to compare the dimension safety evaluation between a general ultrasonic cleaner and an ultrasonic cleaner equipped with UV-C (ultraviolet-C). Methods: An edentulous model was prepared. A denture base and an occlusal rim were fabricated, and scanning was performed. After scanning, a denture base and full arch artificial teeth were designed. The full arch artificial teeth were printed using a three-dimensional printer (n=10). The residual resin was washed with alcohol and then scanned (reference data). The printed specimens were classified and cleaned using a general ultrasonic cleaner (GU group) and an ultrasonic cleaner equipped with UV-C (UC group). After each washing, a rescan was performed (scan data). Reference data and scan data were superimposed using overlapping software. Data were statistically analyzed using the Mann-Whitney test (α=0.05). Results: In the deviation values of full arch artificial teeth, the GU group showed a high deviation of 18.02 ㎛ and the UC group showed a low deviation of 15.02 ㎛. The two groups demonstrated a statistically significant difference (p<0.05). Conclusion: Full arch artificial teeth prepared using photopolymerized resin were deformed according to the temperature of water generated in the ultrasonic cleaner. It is judged that there is no deformation according to the UV-C ultrasonic cleaner.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.115-128
• /
• 2004

In this study, optical and mechanical properties were investigated with 4 kinds of commercial dental enamels. As a result of EDS analysis $SiO_2,\;Na_{2}O,\;Al_{2}O_3\;and\;K_{2}O$ were the main components of commercial dental enamels. In case of H specimen, content of $SiO_2\;and\;K_2O$ were more than that of another specimens. Starting powder and fired specimens were glass ceramics which were consist of amorphous phase and leucite (crystalline) phase. Crystallization did not occurred during firing process, since the XRD peak intensity was similar between starting powder and fired specimens. As a result of differential thermal analysis, $T_g$ and crystalline temperature was varied with composition in the range of $548\sim576^{\circ}C$ and $735\sim780^{\circ}C$ respectively. 0.5mm thickness dental enamel specimens showed sufficient translucent properties. However, transmittance and reflectance were lower than 5% result from scattering due to the refractive index difference between glass and crystalline phase. 3 point bending strength was in the range of 73.9$\sim$101.8MPa which was similar or slightly higher than enamel of natural teeth and Vickers hardness was higher than enamel of natural teeth more than 100.

• Journal of Technologic Dentistry
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2018

Purpose: The purpose of this study was to analyze the biomechanical properties of the dental implants on the supporting bone using three-dimensional finite element method when three different abutment materials were applied to the implant system. Methods: Three different dental implant models were fabricated by applying Ti, PEEK, and CRE-PEEK (60% carbon-reinforced PEEK) to abutment material. The abutment and connecting screw from the fixture was applied with a tightening torque of 20 Ncm. And then, total loads of 150 N were applied in an $30^{\circ}oblique$ direction (to the vertical). The structural stability of dental implants on the supporting bone was analyzed using Von Mises stress and principal stress values. Results: The maximum tensile stress of the cortical bone was highest at 12.6 MPa in the PEEK abutment (Model-B). Ti abutment (Model-A) and CRE-PEEK abutment (Model-C) showed similar stress distributions (10.6 and 10.3 MPa, respectively). And the maximum compressive principal stress was similar in all models. The Von Mises stress value delivered to the bone around the implant was highest at 16.5 MPa in Model-B. On the other hand, Model-A and C showed similar stress distributions (14.0 and 13.8 MPa, respectively). In addition, the maximum equivalent stress applied to the abutment was highest at 629.8 MPa in Model-A. The stress distribution in Model-C was 573.9 MPa. Whereas, Model-B showed the lowest value at 165.6 MPa. Conclusion : The dental implant supporting bone system using PEEK material seems to have the possibility of supporting bone fracture. It was found that the CRE-PEEK abutment can reduce the elastic deformation and reduce the stress value of the interfacial bone.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.187-201
• /
• 2003

The purpose of this study was to investigate the relationship of empowerment, self-efficacy and turnover intention of dental technicians. The subjects of this study were selected by haphazard sampling and the size was 142 of the dental technician. The results were analyzed with spss/pc+ and the conclusion is as follows ; 1. The mean of dental technicians empowerment was 3.24, Self-efficacy was 3.51, and their turnover intention was 2.72. 2. In characteristics of subjects, turnover experience and position are significantly different in empowerment. 3. In characteristics of subjects, a working experience, income, position, marriage and turnover experience are significantly different in self-efficacy. 4. In characteristics of subjects, a position and a working experience are significantly different in turnover intention. 5. Empowerment showed a positive correlation with self-efficacy and a negative correlation with turnover intention. The above results is different from other empowerment studys which empowerment is related with self-efficacy and turnover intention. The study on empowerment is important in the aspect of stratege for increasement of work performance.

• Journal of the Health Care and Life Science
• /
• v.11 no.2
• /
• pp.393-405
• /
• 2023

Oral diseases have been reported to affect approximately 3.5 billion people worldwide, and in Korea, gingivitis and periodontal disease ranked first in the most frequent diseases from 2019 to 2021. Microorganisms that cause oral diseases include not only some bacteria such as Streptococcus mutans, Porphyromonas gingivalis, Fusobacterium nucleatum, Streptococcus gordonii, Leptotrichia buccalis, Prevotella, and Treponema, but also fungi Candida albicans and archaea Methanobrevibacter oralis. In the process by which oral microorganisms cause periodontal disease, bacteria such as Streptococcus mutans first proliferate to form a biofilm, and then obligate anaerobes, opportunistic bacteria, and pathogens attach, proliferate and settles down, forming plaque in the subgingival area of the host with weakened immunity. In this way, various interactions within the community are important in causing oral disease. Furthermore, substances and inflammation resulting from oral microorganisms and oral diseases are closely related to the occurrence of digestive diseases, diabetes, cardiovascular diseases, cognitive function, rheumatoid arthritis, premature birth, and cancer, and vice versa.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.17-23
• /
• 2008

Gypsum products are used for the preparation of stone casts of oral and maxillofacial structures and as important adjuncts to dental laboratory operations involved in the production of dental prosthesis. Accuracy and dimensional stability over time are properties of concern in fixed prothodontics. Gypsum products used in denstry are a form calcium sulfate hemihydrate and are classified as 1 of 5 types according to International Standard Organization(ISO) 6873. All die materials exhibit some dimensional change during setting, but expansion and contraction during setting and dimensional changes in response to varations in temperature and the water-powder ratio must be minimal. Although numerous investigators have studied the properties of die materials, several products have been introduced recently with manufacturer claims of superior dimensional stalility. The aim of this study was to determine the surface properties using various separating materials of dental gypsum products The results were as follows 1. In the comparison of first and second plaster distances before separation in different separating agent, there was no significant difference except using Trio separating agent. The interface using Trio separating agent forms like to pores. 2. In the comparison of first and second plaster distances after separation in different separating agent, there was significant difference. The interface of plasters using WD-40, Trio and Vaseline was showed some gaps. Each they were measured at average 7.97 $\pm$ 2.07 ${\mu}m$, 63.09 $\pm$ 23.25 ${\mu}m$, 27.59 $\pm$ 4.19 ${\mu}m$. 3. In the comparison of the surface, the surface of control sample(using none seperating agent) showed irregular properties and the surface using Trio and Vaseline become wrinkled. Specially the surface using Vaseline was showed shiny properties. But the surface using MAGIC SEP, Plaster seperating agent, WD-40 showed regular properties.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.161-171
• /
• 2003

The purpose of this study is to examine the effect of parents knowledge on oral health status toward their children. This study was carried out to investigate and analyze the cognitive degree of dental subjects and general public who have an experience to be treated for their dental knowledge, operative dentistry, and dental prothesis in the oral health care through the questionnaires. The results are as follows : 1 : In questioning the frequency in the visitation of dental clinic, 68.8% usually go to see dentists, if children's teeth have trouble. It was the reason that economical standard and educational level were enhanced as before. 57.6% took a kind of medical measures. 2 : In surveying the preference of dentists’ age or gender, 56.9% preferred younger dentists to older or female dentists. On the contrary, 56.9% children want younger dentists, and 64.8% children want female dentist doctor. As a conclusion, the preference of dentists’ age or gender is relevant with a view to remove big horror, which can be evoked by dental measures. 3 : In questioning the possession amount of decayed teeth, 45.8% have more than four. Usually those parents who have children filled their decayed teeth with artificial or installed with dental prosthesis. As a conclusion, age is relevant in this study in p<0.05 level. 4 : In asking for efficient starting-year of tooth brushing, 42.6% said that 2 or 3 year age is the most efficient, and especially 80.6% teach children to learn brushing themselves. (P<0.05). As a conclusion, the voluntary brushing can be good behaviour for good dental health. 5 : In surveying the way they obtained dental information, 38.9% were given form mass media, but 90% were once not delivered with the education of dental health. Because parents have been known narrow and deficient information of dental health through mass media, experts in dental health have to deliver help their parents to be delivered with systematical dental information. The conclusion of this study can be summarized that parents' role is very important to their children's tooth health and the education program for systematical dental information should be delivered to their parents.