• 대한치과보철학회지
• /
• 제56권1호
• /
• pp.88-94
• /
• 2018

최근 치과치료의 영역에서 디지털 임플란트 시스템은 그 영역을 넓혀 나가고 있다. 디지털 장비들의 기술적 발전에 힘입어 한계점들이 하나 둘씩 극복되었다. 초기 단일치아 수복 정도에나 사용되었던 디지털 임플란트 시스템은 임플란트 수술에서부터 보철물 제작까지 무치악의 영역에서도 사용되고 있다. 본 증례에서는 50세의 하악 무치악 환자가 임플란트를 이용한 교합 재건을 원하였다. 하악의 임플란트 수복을 위해서 "All-on-4" 개념의 디지털 임플란트 시스템 사용을 계획하였고, 무절개 수술을 위한 가이드 장치를 제작하여 수술을 시행하였다. 수술 후, 전악 보철을 디지털 장비를 이용하여 제작하였다. 전체 치료 과정에서 기존의 아날로그 방식(인상채득, 납형 제작, 주조 등)을 가능한 배제하고 디지털 시스템을 이용하여 기공과정 및 임상과정을 최소화하기로 계획하였고 만족할만한 결과를 얻었기에 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.343-350
• /
• 2021

PURPOSE. The success of an implant-prosthetic rehabilitation is influenced by good implant health and an excellent implant-prosthetic coupling. The stability of implant-prosthetic connection is influenced by the rotational tolerance between anti-rotational features on the implant and those on the prosthetic component. The aim of this study is to investigate the rotational tolerance of a conical connection implant system and its titanium abutment counterpart, in various conditions. MATERIAL AND METHODS. 10 preparable titanium abutments, having zero-degree angulation (MegaGen, Daegu, Korea) with an internal 5-degree conical connection, and 10 implants (MegaGen, Daegu, Korea) were used. Rotational tolerance between the connection of implant and titanium abutments was measured through the use of a tridimensional optics measuring system (Quick Scope QS250Z, Mitutoyo, Kawasaki, Japan) in the as-received condition (Time 0), after securing with a titanium screw tightening at 35 Ncm (Time 1), after tightening 4 times at 35 Ncm (Time 2), after tightening one more time at 45 Ncm (Time 3), and after tightening another 4 times at 45 Ncm (Time 4). RESULTS. The group "Time 0" had the lowest values of rotational freedom (0.22 ± 0.76 degrees), followed by the group Time 1 (0.46 ± 0.83 degrees), the group Time 2 (1.01 ± 0.20 degrees), the group Time 3 (1.30 ± 0.85 degrees), and the group Time 4 (1.49 ± 0.17 degrees). CONCLUSION. The rotational tolerance of a conical connection is low in the "as received" condition but increases with repetitive tightening and with application of a torque greater than 35 Ncm.

• 구강회복응용과학지
• /
• 제26권1호
• /
• pp.47-57
• /
• 2010

임플란트-골 계면상에 미세동요 없이 회복기를 가지는 것은 골융합을 위해서 필수적이다. 이를 위해 임플란트의 초기 안정성은 성공적인 예후를 위해서 중요한 요건이다. 충분한 골질과 골량은 임플란트의 초기 안정성과 조기 실패 방지를 위해 중요한 요소이지만, 임플란트가 갖는 외형적 특성이 초기 안정성에 미치는 영향에 대한 연구는 부족하다. 이에 본 연구는 임플란트의 형태가 초기 안정성에 미치는 영향을 알아보고자 하였다. 골질에 따라 피질골과 해면골의 두께가 서로 다른 모형골에 straight body의 US II, GS II, SS II system과 tapered body의 GS III system (OSSTEM Implant Co., Seoul, Korea) 임플란트를 식립하고 식립 회전력과 공진 주파수 및 동요도를 측정하였다. 이번 실험에서 초기 안정성에 주요한 영향을 미치는 요소는 골질로 나타났다. 임플란트의 형태에 따라 이중 나사선을 가지는 GS II 임플란트가 초기 안정성은 높게 나타났으며 tapered 한 임플란트가 straight 임플란트에 비해서 높은 초기 안정성을 얻을 수 있음을 알 수 있었다. 또한 tapered 임플란트 식립 시 임플란트의 외형과 조화된 식립구를 형성하는 것이 피질골이 두꺼운 경우 피질골에 과도한 압축력을 감소시키고 반대의 경우 해면골로부터 좀 더 많은 골고정을 얻을 수 있음을 알 수 있었다.

• Journal of Periodontal and Implant Science
• /
• 제43권6호
• /
• pp.308-314
• /
• 2013

Purpose: The purposes of this study were to assess the dentists' subjective satisfaction with the crestal approach sinus (CAS) kit, a device for maxillary sinus membrane elevation by the crestal approach using a special drilling system and hydraulic pressure, and to summarize the subjective satisfaction of dental implants placed after a sinus lift procedure with the CAS kit. Methods: Thirty dental clinicians who had experience with dental implant placement after a sinus lift procedure with the CAS kit from June 2010 to May 2012 were included in this study. The questionnaire for the evaluation of the dentists' subjective satisfaction with the CAS kit was sent to the respondents and returned. The questionnaire was composed of two main parts. The first part was related to the sinus membrane perforation rate. The second part was related to the dentists' subjective satisfaction with the CAS kit. Results: A total of 28 dentists answered the questionnaire. Among 924 implant cases, sinus membrane perforation occurred in 38 cases (4.1%). Among the 28 dentists, 26 dentists (92.9%) were satisfied or very satisfied with the CAS kit. In particular, 24 dentists (85.7%) reported that safety, cutting performance, and user-friendliness of the CAS drill were advantages of the CAS kit. However, 7 dentists (25%) did not routinely use the hydraulic lifter for sinus membrane elevation. Conclusions: From the survey, it was shown that the respondents were generally satisfied with the CAS kit and that the cutting performance and safety of the drill component were considered strengths of the CAS kit.

• 구강회복응용과학지
• /
• 제24권2호
• /
• pp.193-201
• /
• 2008

하악 완전 무치악 환자의 보철수복에 있어 임플란트 식립 후 피개의치의 제작은 첫 번째 치료 옵션으로 고려되어질 수 있다. 임플란트 지지 텔레스코프 피개의치를 제작하는 경우 인공치 및 유지 장치의 배열을 위한 악간 공간이 필요하다. 임플란트 상부 보철물의 passive한 fit은 보철물의 기계적 실패를 막는 중요한 요소이다. Gold electroforming system을 이용하여 제작한 telescopic attachment는 우수한 마진 적합도 및 passive한 fit을 보이며 얇은 코핑 두께로 인하여 좁은 악간 공간에서도 사용이 가능한 장점이 있다. 본 증례에서는 4개의 임플란트 식립 후 Gold electroforming system을 이용하여 telescopic overdenture를 제작하여 기능 및 심미적으로 좋은 결과를 나타내었다.

• 한국치위생학회지
• /
• 제7권4호
• /
• pp.481-493
• /
• 2007

It follows in increase of the old age population and the loss of teeth increases, also the supplement prosthetics treatment which is caused by loss of teeth is various and it develops and the dentistry implant demand is increasing. This study enforced a self-administered survey with 197 dental personnels employed in dental hospitals, dental clinics from August 15, 2007, to September 15, in the area of Daejeon. It's ultimately intended to serve as a basis for the preparation of more effective, appropriate dental implants education programs for personnels, who take a crucial part in dental implants operation, provide better dental services to patients who are in need of dental implants operation. As the result, the study got the following conclusion. 1. The population sociological feature of dental hospital and dental clinic showed that significant differences of dental service career. Dental service career of dental personnels shows; below 3 years 43.1%, 4~6 years 35.3%, more than 7 years 21.6% in dental hospitals, below 3 years 29.5%, 4~6 years 28.1%, more than 7 years 42.5% in dental clinics(p=0.027). 2. The average score of personnels knowledge in dental implants was 3.67point, from analyzing the knowledge on dental implants of dental personnels from dental health-care settings, dental personnels employed in dental hospitals scored relatively higher than in dental clinics(p=0.129). Dental personnels with 4~6 years of experience scored the highest(p=0.002). 3. The average score of dental personnels compliance in dental implants was 3.92point, from analyzing the compliance of dental implants of dental personnels from dental health-care settings, dental personnels employed in dental hospitals scored relatively higher than in dental clinics(p=0.006). Dental personnels with 4~6 years of experience scored the highest(p=0.707). 4. The contingency coefficient between dental implants general knowledge and the general compliance(r=0.233, p=0.001), operation knowledge and operation compliance(r=0.332, p=0.000), maintenance knowledge and maintenance compliance(r=0.236, p=0.001). 5. Recently dental implants is emerging as one of the important medical services in the dental treatment sector. From analyzing the compliance of dental implants of dental personnels in dental health-care settings, dental personnels employed in dental hospitals scored relatively higher than in dental clinics. Consequently, the effort of the dentist and the dental personnels demanded to be earnestly to improves the difference of the knowledge and compliance against the dental implants of the dental personnels in dental health-care settings, it is thought that with reinforcement of effective role share and professionalism to success of dental implants, more system and the specialty dental implants education which is standardized continuously must be provided to all dental personnels.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.149-153
• /
• 2011

Purpose: The aim of the present study was to evaluate the clinical outcome of resorbable blasting media surface tapered implant. Methods: 169 Osstem$^{(R)}$ GS III dental implants in 73 patients who received implant treatments at Seoul National University Bundang Hospital, were included in this study. The incidence of biological and prosthetical complications has been carefully analysed for each implant. Results: The short-term implant survival rate was 97.63%, success rate 94.7%. The prevalence of biological complications was 15.38% and the prevalence of prosthetic complications was 13.04%. The mean value of crestal bone loss was $0.28{\pm}0.57$ mm. The relationship between loading periods and marginal bone loss was small and not statistically significant. In mandible, marginal bone loss was larger than in maxilla, no statistically significant. Also, length and diameter of implant had no relationship with marginal bone loss. Conclusion: We suggest that this implant system could achieve successful and stable results.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.229-234
• /
• 2008

Porous Ti implant samples were fabricated by the sintering of spherical Ti powders in a high vacuum furnace. To increase their surface area and biocompatibility, anodic oxidation and a hydrothermal treatment were then applied. Electrolytes in a mixture of glycerophosphate and calcium acetate were used for the anodizing treatment. The resulting oxide layer was found to have precipitated in the phase form of anatase $TiO_2$ and nano-scaled hydroxyapatite on the porous Ti implant surface. The porous Ti implant can be modified via an anodic oxidation method and a hydrothermal treatment for the enhancement of the bioactivity, and current multi-surface treatments can be applied for use in a dental implant system.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.100-106
• /
• 2021

Typical implants are not specified the screw structure and the surface process according to the bone quality of the human body. The purpose of this study is to complement the shortcomings of the existing implant surface processing method. It is to propose a surface processing method that increases the adhesion between the implant and bone tissue by increasing the surface area per unit area of the implant. It is very important to establish precise and systematic process parameters when surface treatment of implants using lasers. Therefore, we intend to develop a process so that the implant can be a biocompatible structure using a Q-switching Nd:YAG laser with a wavelength of 1.06um. Implant surface treatment technology through this study will be used in the industry.

• 대한치과보철학회지
• /
• 제43권5호
• /
• pp.671-683
• /
• 2005

Statement of problem: The most commonly reported problem associated with dental implant restoration is the loosening of the screws. Purpose: This study compared the efficacy of an implant system incorporating an anti-rotational locking sleeve(Anti-Rotating Inner Post Screw System(ARIPS-system)) with other, traditional implant systems as a means of minimizing vibration loosening. Materials and methods: Three implant systems were examined; the conventional external hex type, the ARIPS-system, and the internal taper type implant system 30 specimens(10 samples per group)were fabricated and each abutment screw was secured to the implant future with 32Ncm of torque force and loosening torque was measured using a Torque Gauge. The procedure was repeated 3 times, recording initial loosening torque each time. The re-tightened abutment screw was subjected to a cyclic load having a maximum forte of 200N and minimum of 20N at 2Hz over a period of 12,600 cycles. after which the loosening torque was measured. Measured values were calaulated for statistical analysis. Analysis of measured value was performed by 3 methods: (i) as a percentage average of the initial 3 loosening-torque values(initial loosening value) to the tightening torque of 32Ncm, (ii) as a percentage of the loosening torque value after a load of 200N(experimental value) to the initial loosening value, and (iii) as a percentage of the experimental value to the 32Ncm of tightening torque. The analyses shows the amount of initial loosening at the screw, loosening by repetitive load and the the final loosening value. Results: The results of this study were as follows (1) Percentage of initial loosening value to tightening-torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). (2) Percentage of experimental value to initial loosening value was increased in order of external hex, ARIPS-system and internal taper. Value of internal taper showed significant difference with those of external hex and ARIPS-system (p<0.05). (3) Percentage of experimental value to tightening torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). Conclusion: The results of the analysis of the final loosening level value, which are closely correlated to clinical use, show that the ARIPS-system can be a useful means of minimizing abutment screw loosening when compared to the external hex type system. Although further clinical studies need to be made, the ARIPS-system should be considered to maximize the long-term success of the implant prosthesis.