• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.8-17
• /
• 2018

PURPOSE. The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach. MATERIALS AND METHODS. A titanium maxillary first molar preparation was created as reference dataset (REF). Silicone impressions were duplicated from REF and randomized into 6 groups (n=8). Gypsum preparations were formed and grouped according to the color of gypsum materials, and light-scanned to obtain prepared datasets (PRE). Then, in terms of accuracy, PRE were superimposed on REF using the best-fit-algorithm and PRE underwent intragroup pairwise best-fit alignment for assessing reproducibility. Root mean square deviation (RMSD) and degrees of similarity (DS) were computed and analyzed with SPSS 20.0 statistical software (${\alpha}=.05$). RESULTS. In terms of accuracy, PREs in 3D directions were increased in the 6 color groups (from 19.38 to $20.88{\mu}m$), of which the marginal and internal variations ranged $51.36-58.26{\mu}m$ and $18.33-20.04{\mu}m$, respectively. On the other hand, RMSD value and DS-scores did not show significant differences among groups. Regarding reproducibility, both RMSD and DS-scores showed statistically significant differences among groups, while RMSD values of the 6 color groups were less than $5{\mu}m$, of which blue color group was the smallest ($3.27{\pm}0.24{\mu}m$) and white color group was the largest ($4.24{\pm}0.36{\mu}m$). These results were consistent with the DS data. CONCLUSION. The 3D volume of the PREs was predisposed towards an increase during digitalization, which was unaffected by gypsum color. Furthermore, the reproducibility of digitalizing scanning differed negligibly among different gypsum colors, especially in comparison to clinically observed discrepancies.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.75-80
• /
• 2016

악골기형에 따른 외과적 치료방법은 상악골 또는 하악골을 직접 늘리거나 줄이는 방식을 이용한다. 골신장술(distraction osteogenesis)은 열성장한 악골에 치밀뼈절단술(corticotomy)을 시행한 후, 골신장기(jaw bone distractor)를 사용하여 간헐적인 힘을 골에 부과하며 골의 길이를 늘여주는 대표적인 방법이다. 그러나 이러한 골신장기는 피부를 관통한 채 골에 고정되기 때문에, 비심미적이며 감염이나 흉터 등의 많은 문제점이 발생한다. 이 연구에서는 구내형 골신장기(intraoral jaw bone distractor) 개발을 위해 유한요소분석을 시행하여 핵심구동부의 안정성을 시뮬레이션한 후, 골신장기를 제작하였다. 융합연구를 통하여 향후 무선형 골신장기를 제작하기 위한 기반 자료를 구축하였으며, 관련 자료는 골신장술의 근본적인 문제점을 해결할 수 있는 가능성을 제시하며, 제반 기술은 다양한 의료기기 개발 기술에 활용될 수 있다

• 대한치과교정학회지
• /
• 제31권5호
• /
• pp.499-504
• /
• 2001

하악골 횡적 성장결핍에 의한 하악 전치부의 총생을 치료하는데 성인의 경우 발치가 종종 요구된다. 그러나 발치에 의한 안모 변화가 바람직하지 않을 때 견인골 신장술을 시행하여 하악 정중부의 확장은 횡적 공간을 확보하여 빠른 교정치료 및 안정성을 확보할 수 있는 방법으로 고려된다. 하악 정중부 견인골 신장술을 시행한 후 tooth-borne type 과 tooth & bone-borne type distractor를 사용하여 latency, distraction, consolidation period를 거쳐 하악 정중부 횡적 확장을 시행하여 전치부 총생을 빠르게 치료할 수 있었으며, 두가지 방법에 의한 치유과정을 비교한 결과 치주적인 요소와 골 형성과정은 유사하였으며, 악관절 부위의 퇴행적 증상변화는 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.275-286
• /
• 2002

Statement of problem. Surface alteration of the implant screws after function may be associated with mechanical failure. Theses metal fatigue appears to be the most common cause of structural failure. Purpose. The purpose of this study was to evaluate surface alteration of the implant screws after function through the examination of used and unused implant screws in SEM(scanning electron microscope). Materials and methods. In this study, abutment screws(Steri-oss, 3i), gold retaining screw(3i) and titanium retaining screw(3i) were retrieved from patients. New, unused abutment and retaining screws were prepared for control group. Each of the old, used screws was retrieved with a screwdriver. And retrieved implant complex of Steri-oss system was prepared for this study. Then, SEM investigation and EDS analysis of abutment and retaining screws were performed. And SEM investigation of cross-sectioned sample of retrieved implant complex was performed. Results. In the case of new, unused implant screws, as maunfactured circumferential grooves are regularly examined and screw thread are sharply remained. Before ultrasonic cleansing of old, used implant screw, a lot of accumulation and corrosion products were existed. After ultrasonic cleansing of old, used implant screws, circumferential grooves as examined before function were randomly deepened and scratches increased. Also, dull screw thread was examined. More surface alterations after function were examined in titanium screw than gold screw. And more surface alteration was examined when retrieved with driver than retrieved without driver. Conclusions. These surface alteration after function may result in the screw instability. Regularly cleansing and exchange of screws was recommended. We recommend the use of gold screw rather than titanium screw, and careful manipulation of the driver.

• 대한치과보철학회지
• /
• 제40권4호
• /
• pp.344-351
• /
• 2002

The purpose of this study is to compare tensile bond strength between Cr-Co alloy and three denture base resins after surface treatment. Following the manufacturer's instructions, 180 bonded specimens were made from three denture base resins (Lucitone 199. Paladent 20. POSS resin) and three surface treatment methods (sandblasting. metal primer. silicoating) 20 samples were made in each group and a half was ther-mocycled 1000 times between $5^{\circ}C$ and $55^{\circ}C$. The tensile bond strength was measured using an Instron with 5mm/min crosshead speed. Data was analyzed with one-way ANOVA, T-test and Duncan test. The results were as follows : 1. Samples with metal primer coating had significantly high tensile bond strength than the other surface treated groups (p<.05). Significantly low tensile bond strength was shown in sand blasted groups (p<.05). 2. No significant difference was observed in metal primer coating groups before and after ther-mocycling (p>.05) 3. Tensile bond strength was decreased in silicoated samples after thermocycling (p<.05). 4. Of the surface treated groups with metal primer, Lucitone 199 had the greatest bond strength and POSS resin and Paladent 20 were followed (p<.05). 5. Of the surface treated groups with silicoating, POSS resin and Lucitone 199 had greater bond strength than Paladent 20 (p<.05).

• The Journal of Advanced Prosthodontics
• /
• 제8권3호
• /
• pp.172-180
• /
• 2016

PURPOSE. The purpose of this study was to analyze the antimicrobial, antioxidant activity and cytotoxicity of Dendropanax morbifera $L{\acute{e}}veille$ extract for assessing whether Dendropanax morbifera $L{\acute{e}}veille$ can be used for the development of natural mouthwash and denture cleaning solution. MATERIALS AND METHODS. The extract was obtained from branches of Dendropanax morbifera $L{\acute{e}}veille$. The solvent fractions were acquired by fractionating Dendropanax morbifera $L{\acute{e}}veille$ extract using n-hexane, ethyl acetate, chloroform and butanol solvent. Paper disc test was used to evaluate the antimicrobial and antifungal activity of Dendropanax morbifera $L{\acute{e}}veille$ extract and solvent fractions against Streptococcus mutans and Candida albicans. The analysis of antioxidant activity was carried out through DPPH radical scavenging assay. The cytotoxicity of Dendropanax morbifera $L{\acute{e}}veille$ extract was analyzed through MTT assay using normal human oral keratinocytes. RESULTS. Dendropanax morbifera $L{\acute{e}}veille$ extract showed antimicrobial activity against Streptococcus mutans and especially Candida albicans. The solvent fractions of Dendropanax morbifera $L{\acute{e}}veille$ showed strong antimicrobial activity against Streptococcus mutans and Candida albicans in n-hexane and butanol solvent fraction, respectively. Dendropanax morbifera $L{\acute{e}}veille$ extract also showed outstanding antioxidant activity. Butanol, ethyl acetate, and chloroform solvent fraction of Dendropanax morbifera $L{\acute{e}}veille$ tended to have increased antioxidant activity as the concentration increased. Dendropanax morbifera $L{\acute{e}}veille$ extract showed high cell survival rate in cytotoxicity test. CONCLUSION. Dendropanax morbifera $L{\acute{e}}veille$ extract turned out to have antimicrobial, antioxidant activity and cytophilicity. Based on these results, it is expected that Dendropanax morbifera $L{\acute{e}}veille$ is applicable as an ingredient for natural mouthwash and denture cleanser.

• Parasites, Hosts and Diseases
• /
• 제46권2호
• /
• pp.87-90
• /
• 2008

Gynaecotyla squatarolae (Digenea: Microphallidae) adult flukes were recovered from experimental chicks at day 4-6 post-infection and their tegumental ultrastructure was observed with a scanning electron microscopy. They were pyriform in shape, and their anterior halves were concaved ventrally. The whole body surface was covered with tegumental spines, which were wide and 16-17 digitated between oral and ventral suckers. The density of spines and number of digits decreased posteriorly. The oral sucker was subterminal and the excretory pore was at the posterior end of the worm. Two ventral suckers were similar in appearance and protruded near midline of the worm. The genital atrium was dextral to the small ventral sucker. The dorsal surface was covered with tegumental spines, but the spines were sparser than on the ventral surface. On the middle portion of the dorsal surface, a small opening presumed to be the Laurer's canal was seen. From these findings, it has been confirmed that the adult G. squatarolae has unique characteristics in the surface ultrastructure.

• Journal of Microbiology and Biotechnology
• /
• 제16권6호
• /
• pp.911-920
• /
• 2006

[ $CD8^+$ ] T Iymphocytes with the cytotoxic activity and capability to release various cytokines are the major players in immune responses against viral infection and cancer. To identify the proteins specific to resting or activated human CD8$^+$ T cells, human CD8$^+$ T cells were activated with anti-CD3+anti-CD28 mAb in the presence of IL-2. The solubilized proteins from resting and activated human CD8$^+$ T cells were separated by high-resolution two-dimensional polyacrylamide gel electrophoresis, and their proteomes were analyzed. Proteomic analysis of resting and activated T cells resulted in identification of 35 proteins with the altered expression. Mass spectrometry coupled with Profound and SWISS-PROT database analysis revealed that these identified proteins are to be functionally associated with cell proliferation, metabolic pathways, antigen presentation, and intracellular signal transduction pathways. We also identified six unknown proteins predicted from genomic DNA sequences specific to resting or activated CD8$^+$ T cells. Protein network studies and functional characterization of these novel proteins may provide new insight into the signaling transduction pathway of CD8$^+$ T cell activation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.31.1-31.7
• /
• 2019

Background: To test the hypothesis that in profile smiling view, for ideal aesthetics, a tangent to the labial face of the maxillary central incisor crowns should be approximately parallel to the true vertical line and thereby perpendicular to the true horizontal line. Methods: An idealized female image was created with computer software and manipulated using the same software to construct an "ideal" female profile image with proportions, and linear and angular soft tissue measurements, based on currently accepted criteria for idealized Caucasian profiles. The maxillary incisor labial face tangent was altered in 5° increments from 70 to 120°, creating a range of images, shown in random order to 70 observers (56 lay people and 14 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers. Results: The most attractive inclination of a tangent to the labial face of the maxillary incisor crowns in profile view in relation to the true horizontal line was 85°, i.e. 5° retroclined from a perpendicular 90° inclination. The most attractive range appears to be between 80 and 90°. Excessive proclination appeared to be less desirable than retroclination. Beyond 105° most observers recommend treatment. Conclusion: In natural head position, the ideal inclination of the maxillary incisor crown labial face tangent in profile view will be approximately parallel to the true vertical line and thereby approximately perpendicular to the true horizontal line.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.191-199
• /
• 2000

Wettability of addition silicone impression material is very important property for making an accurate restoration. This study examined the impression quality in clinical condition and the wettability of impression and die material. Four commercially available addition silicone impression material (Express, Examix, Contrast, Perfect) and three die materials (Die-Keen, Vel-Mix, Fuji-Rock) were studied. A total of 50 putty/wash and heavy body/wash impressions of wet intact permanent molar teeth were examined for definition of the gingival sulcus reproduction and then classified in quality ranking. The percentage of the sulcus reproduction ability of each material was calculated from the sulcus depths of cross-sectioned epoxy resin casts from the impressions and clinically measured sulcus depths, The same impression materials were used to produce 3 groups of die stone casts form void entrapment die had been exposed to milk. Voids in the impression body and stone casts ere counted under a stereoscopic microscope. From the experiment, the following results were obtained : 1. Sulcus reproduction ability of additional silicone impression material were diminished in order of Express, Examix, Perfect, Contrast. The significant difference was found between Perfect and other material. Heavy body/wash combination was superior In putty/wash method n Perfect impression material. 2. In direct observation, Contrast showed least void in impression body but correlations ere not found between sulcus reproduction and void production. 3. In void entrapment laboratory test, wettability were diminished in order of Examix, Contrast, Express, Perfect. Clinical impression recording seems not to correlate with laboratory test. 4. The wettability of die material to impression material was not different in Express, Examix, Contrast. But, in Perfect, Die-Keen had superior wettability to others.