• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.1
• /
• pp.43-57
• /
• 2005

Temporomandibular disorders have been defined as a collective term embracing a number of clinical problems that involve the temporomandibular joint, the masticatory nuscles, and associated structures. There have been many different contributing factors of TMDs which were traumatic, occlusal, pathophysiological and psychosocial. Among there factors, the effect of occlusion on TMDs have been a controversy for a long time. The purpose of this study was to investigate the effect of occlusal factors and oral habits on TMDs. In this study, 140 subjects with signs and symptoms of TMDs and diagnosed of TMD in the Orofacial Pain clinic of Yonsei University Dental Hospital though March to July 2004 were selected for the TMDs group and 50 subjects without any signs and symptoms of TMDs as the control group. The subjects were evaluated clinically in TMDs' Occlusal and Prosthodontic Restoration examinations. TMDs' examination was composed of the TMJ pain, sound, locking, temporal or masseter muscle palpation, mandibular movement, oral habits and headache. Occlusal examination was made of overjet, overbite, lost teeth number, nonfunctional interference, midline shift, then pattern of lateral movement and attrition. prosthodontic restoration examination had the existence of restoration, placement, then number of crown or bridge and Satisfiable index which estimated the quality of occlusal state of prosthodontic restorations. Following results were obtained : 1. The prevalence of TMDs was higher in their 20s & 30s, female of the TMD patients group. 2. The clenching frequency in the TMDs group(40.71%) was higher than those in the control group(18.00%), and there was a significant statistical difference(p<0.05). 3. The frequency of Nonfunctional interference in the TMDs group(10.00%) was higher than those in then Control group(2.00%), and there was a significant statistical difference(p<0.05). The result of this study indicated TMDs prevalence was higher in their 20s, 30s, female group of TMDs patients similar to the previous studies. Clenching and nonfunctional interference were estimated as the contributing factors of TMDs.

• Journal of Biomedical Engineering Research
• /
• v.6 no.1
• /
• pp.37-46
• /
• 1985

Development of a dental Ni-Cr alloy system for porcelain veneering crown and bridge was studied in this research. The principles of alloy design were a) It should not contain toxic beryllium. b) It should have low melting Point. c) It should be easily ground and polished. d) It should possess an adequate strength to resist the deformational force In the mouth. e) It should be bondable Ivith porcelain by chemically. After investigating the effect of minor elements such as boron and rare earth metals on the mechanical properties of the Ni-Cr alloy system, the compromised ideal composition for dental use was determined. The composition was l9.6%, Cr, 5.6% Mo, 3.4% Si, 1, 0% Fe, 0.01% Ti, 0.5-1.0% B, 0.2-0.6% misch metal, balance Ni. To compare the performance of experimental alloy with commercially available alloys, the properties such as strength, melting point, and bond strength were measured. The results Ivere as follows: a) Boron increases the strength of the alloy but reduces the elongation. b) Misch metal increases the strength when the boron content is low, but does not increase the strength when boron content is high. And it reduces the elongation drastically, c) Mechanical strength of the experimental alloy was not superior to commercially available Be containing alloy, but handling performance such as castability, ease of granting and polishing, and cuttability were superior to the Be containing alloy.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2013

PURPOSE. The purpose of this study was to to analyze the effect of Type 2 diabetes on tooth mortality, implant treatment and prosthetic status. MATERIALS AND METHODS. 275 Type 2 diabetics and 300 non-diabetics, aged 40-80 years were selected for analysis. The assessment of number of teeth, missing teeth, fixed prostheses (bridge pontics), implants using panoramic radiographs and dental records were carried out. RESULTS. Diabetes mellitus (DM) patients had a higher number of missing teeth (P<.05) and placed implants (P=.074), age (P<.05), male gender percentage (P=.042), smoker percentage (P<.05) than non-DM patients. In univariate analysis, the patients in older group showed significantly higher number of tooth loss rate at the first dental examination than the patients in younger group. Tooth loss rate of smokers did not show higher value than that of non-smokers. When multiple variables including DM, age, smoking, gender were considered together, diabetics and older group patients showed significantly higher tooth loss rate at the first dental examination than non-diabetics and younger group patients, respectively. Smokers and male group did not show a significant difference than nonsmokers and female group, respectively. CONCLUSION. Tooth mortality and implant treatment rate were significantly higher in the DM group as indicated by univariate and multivariate logistic regression analysis. Old age groups showed significantly higher odds ratios and tooth loss rate. As diabetics showed the higher tooth loss rate than non-diabetics, diabetics also had more implant restorations than non-diabetics.

• Journal of dental hygiene science
• /
• v.21 no.4
• /
• pp.227-232
• /
• 2021

Background: Cancer-associated fibroblasts (CAFs) are abundant in tumor microenvironments and interact with cancer cells to promote tumor proliferation in oral squamous cell carcinoma (OSCC). Cathepsin D (CTSD) is a soluble lysosomal aspartic endopeptidase involved in tumor proliferation and angiogenesis. In this preliminary study, we observed CTSD expression in OSCC and CAFs, postulating that CTSD might act as a bridge between OSCC and CAFs. Methods: Human epidermal keratinocytes (HEKs), OSCC, and immortalized human normal oral fibroblasts (hTERT-hNOFs) were used in this study. Additionally, we used hTERT-hNOFs transfected with an empty vector, WT (wild-type)-YAP (Yes-associated protein), and YAPS127A (YAP serine 127 to alanine). YAP127A hTERT-hNOFs activated fibroblasts similar to CAFs. To identify CTSD expression between OSCC and CAFs, conditioned medium (CM) was collected from each cell. Protein expression of CTSD was identified by western blotting. Results: To identify the expression of CTSD in fibroblasts stimulated by OSCC, we treated fibroblasts with CM from HEK and OSCC. Results indicated that hTERT-hNOFs with OSCC CM showed a weakly increased expression of CTSD compared to stimulation by HEK CM. This indicates that CAFs, YAPS127 hTRET-hNOFs, overexpress CTSD protein. HEK cells showed no CTSD expression, regardless of treatment with fibroblast CM, whereas OSCC highly expressed CTSD proteins compared with the CTSD expression in HEK cells. We also found that CTSD expression was unaffected by changes in transforming growth factor-β levels. Conclusion: This study proposes that CTSD might have potential as an interacting executor between OSCC and CAFs. Further studies are needed to investigate the role of CTSD in tumor and stromal cells.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.236-244
• /
• 2011

Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.753-759
• /
• 2007

Statement of problem. In distal extension removable partial denture, the preservation of health of abutment teeth is very important, but abutment teeth are subjected to unfavorable stress under unilateral loading specially. Purpose. The purpose of this study was to investigate the biomechanical effects of mandibular removable partial dentures with various prosthetic designs under unilateral loading, using strain gauge analysis. Material and methods. Artificial teeth of both canines were anchored bilaterally in a mandibular edentulous model made of resin. Bilateral distal extension removable partial dentures with splinted and unsplinted abutments were fabricated. Group 1: Clasp-retained mandibular removable partial denture with unsplinted abutments Group 2: Clasp-retained mandibular removable partial denture with splinted abutments by 6-unit bridge. Group 3: Bar-retained mandibular removable partial denture Strain gauges were bonded on the labial plate of the mandibular resin model, approximately 2 mm dose to the abutments. Two unilateral vertical experimental loadings (30N and 100N) were applied subsequently via miniature load cell that were placed at mandibular left first molar region. Strain measurements were performed and simultaneously monitored from a computer connected to data acquisition system. For within-group evaluations, t-test was used to compare the strain values and for between-group comparisons, a one-way analysis of variance (ANOVA) was used and Tukey test was used as post hoc comparisons. Results. The strain values of group 1 and 2 were tensile under loadings. In contrast, strain values of group 3 were compressive in nature. Strain values increased as the applied load in increased from 30N to 100N (p<.05) except for right side in group 1. Under 30N loading, in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 100N loading in left side, group 1 showed higher strain values than groups 2 and 3 in absolute quantity (p<.05). And group 2 showed higher strain values than group 1 (p<.05). In right side, group 1 and 2 showed higher strain values than group 3 in absolute quantity (p<.05). Under 30N loading, group 2 and 3 showed higher strain values in right side than in left side. Under 100N loading, right side strain values were higher than left side ones for all groups. Conclusion. Splinting of two isolated abutments by bridge reduced the peri-abutment strain in comparison with unsplinted abutments under unilateral loading. Bar-retained removable partial denture showed the lowest strain of three groups, and compressive nature.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.55-59
• /
• 2004

Cleidocranial dysplasia is a rare and autosomal dominent disorder characterized by aplasia or hypoplasia of the clavicles, an open fontanelle, dental abnormalities, and short stature, A 17-year-old female who presented with short stature and subsequent delay in eruption of permanent teeth is described. she showed the abnormal hypermobility of the shoulder, ocular hypertelorism and concave nasal bridge. Radiographs revealed the underdeveloped maxilla, defect of the cranium in the fontanelle region, and aplasia of the clavicles. Characteristically, panoramic view revealed near parallel-sided borders of the ascending ramus and downward curvature of the zygomatic arch with hypoplasia. The prolonged retention of deciduous teeth with delayed eruption of permanent teeth and multiple embedded supernumerary teeth were striking. Radiographic and clinical investigations revealed Cleidocranial dysplasia.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.386-390
• /
• 2007

This is about the case of loss of multiple teeth and alveolar bone caused by trauma, which needed alveolar bone augmentation before implant treatment. Alveolar bone was reconstructed using iliac bone graft, and thereafter first implant surgery was followed by consolidation period of 3 months. Iliac bone resorption was observed at the time of implant placement. And that resorption was more in the horizontal dimension than in the vertical. We conclude that additional treatment planning(e.g. using alveolar distraction osteogenesis or tissue expander) should be considered besides bone graft for vertical alveolar bone augmentation. For both maxilla and mandible, prosthodontic treatment was carried out $4{\sim}5$ months after implant placement. To compensate alveolar bone deficiency, partial hybrid overdenture on maxilla and implant-supported fixed bridge on mandible were fabricated, and the total treatment was finished.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.6
• /
• pp.480-483
• /
• 2002

Treatments for restoring the function and esthetics of missing teeth include fixed bridge, partial denture, orthodontic movement, implantation and autotransplantation. However, there is no absolute indications for each techniques. Due to undevelopment of root and root resorption after autotransplantation, the success rate of autotransplantation over the past decades have been low. Recently. with the study on biological principles of the healing of periodontal ligament, the success rate of autotransplantation began to improve. We report the cases of successful autotransplantation which resulted in ideal healing of periodontal ligament, gingiva and alveolar bone.

• Journal of Periodontal and Implant Science
• /
• v.28 no.2
• /
• pp.273-280
• /
• 1998

This study was to compare the patients wearing comfortable distally extending cantilever bridges (DECBs) with those having discomfortable ones, in the aspect of the periodontal condition & prosthodontic status. The subjects in the present study were 164 patients appointed to Seoul National University Dental Hospital. One group was consisted of 101 patients wearing comfortable DECBs and the other group were made of 64 patients who had felt discomfort. On clinical parameters, there were no significant difference between 2 groups in plaque index, tooth mobility & probing depth, but gingival index was higher in group wearing discomfortable DECBs. In prosthodontic status, the ratio of pontic oversize was higher in the group of discomfortable DECBs, but there were no significant difference in the view of crown overcontour, overhanging margin & interproximal space closure between 2groups. This study failed to clarify causal factors of discomfortable DECBs.