• Structural Engineering and Mechanics
• /
• v.6 no.2
• /
• pp.125-141
• /
• 1998

Recent test results of steel moment connections repaired with a haunch on the bottom side of the beam have been shown to be a very promising solution to enhancing the seismic performance of steel moment-resisting frames. Yet, little is known about the effects of using such a repair scheme on the global seismic response of structures. When haunches are incorporated in a steel moment frame, the response prediction is complicated by the presence of "dual" panel zones. To investigate the effects of a repair on seismic performance, a case study was conducted for a 13-story steel frame damaged during the 1994 Northridge earthquake. It was assumed that only those locations with reported damage would be repaired with haunches. A new analytical modeling technique for the dual panel zone developed by the author was incorporated in the analysis. Modeling the dual panel zone was among the most significant consideration in the analyses. Both the inelastic static and dynamic analyses did not indicate detrimental side effects resulting from the repair. As a result of the increased strength in dual panel zones, yielding in these locations were eliminated and larger plastic rotation demand occurred in the beams next to the shallow end of the haunches. Nevertheless, the beam plastic rotation demand produced by the Sylmar record of 1994 Northridge earthquake was still limited to 0.017 radians. The repair resulted in a minor increase in earthquake energy input. In the original structure, the panel zones should dissipate about 80% (for the Oxnard record) and 70% (for the Sylmar record) of the absorbed energy, assuming no brittle failure of moment connections. After repair, the energy dissipated in the panel zones and beams were about equal.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.566-567
• /
• 2008

한국의 전력 산업은 현재 개발도상국들의 급속한 경제성장에 의해 연료가격이 상승하고 NIMBY현상으로 인해 발전설비의 확장에 필요한 입지선정에 어려움을 겪고 있다. 이러한 현상은 설비의 확장을 통한 공급측 수요관리(Supply-Side Management)에서 벗어나 전력사용의 효율성을 향상시킴으로써 안정적인 전력을 공급하는 수요측 관리(Demand-Side Management)의 중요성을 점차 크게 하고 있다. 수요측관리는 지원금을 이용하여 전력수요를 조절하고 있으며, 수요관리의 중요성이 커짐에 따라 지원금 규모는 점점 커지고 있다. 하지만 현재 지원금 산정에 대한 구체적인 연구가 진행되고 있지 않은 실정이므로 이에 대한 연구를 통해 더욱 효율적인 지원금 산정을 통한 수요관리 효과를 극대화 할 필요가 있다. 본 논문에서는 07년도에 지원금변화에 대한 잠재참여자의 선호도를 조사한 "지원금에 대한 수용가 반응도 조사"를 이용하여, 지원금 변화에 따른 수요관리 프로그램의 잠재참여자의 참여도를 수식화 함으로써 지원금 변화에 대한 수요관리 프로그램의 영향도를 분석할 수 있게 하는데 목적을 두고 있다.

• International Journal of Automotive Technology
• /
• v.1 no.1
• /
• pp.56-60
• /
• 2000

The customers demand of a good vehicle agility consists of a quick reaction of the vehicle with the actuation of the throttle pedal on one hand and a high comfort level of vibration and noise within the vehicle on the other hand, which means the reduction of disturbing side effects. In order to achieve a satisfactory compromise it is necessary to gain a deeper understanding of the complex, high dynamic vibrations system "vehicle / drive train". For several years the ika has been carrying out such detailed vehicle investigations and test bench measurements in addition to comprehensive CAE analysis for various research projects in partnership with different vehicle manufacturers.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1071-1081
• /
• 2022

As the demand for high-rise buildings increases, the demand for high-speed elevators is also increasing. In order to make a high-speed elevator, a method is needed to reduce the weight of the elevator's components, which is a constraint on the increase in speed. As a measure to reduce the weight, it is possible to remove the traveling cable for power and signal supply. Since the weight of the traveling cable varies depending on the position of the carriage, it is difficult to compensate the weight using the counter weight. The power supply is a structure in which a brush-rail type power input terminal is installed in the elevator hoistway to receive power in a contact-type manner while the carriage is moving. If a small-capacity ESS is installed in a passenger car, power can be supplied uninterruptedly inside the passenger car. A small-capacity ESS charging system to be applied to such an elevator system is required to perform several functions. First, the passenger Car must be able to charge as much as possible even during high-speed operation. A control algorithm with high responsiveness is required because charging starts and ends repeatedly by the partially installed input power stage. In addition, if the input-side line impedance is large due to the structure of the system and the response characteristic is increased, the stability of the system may be lowered. Accordingly, in this paper, we propose a control algorithm that has a stable steady-state output while having a fast response in a transient state. To verify the proposed control algorithm, simulation was conducted using PSIM, and the performance of the controller was verified by manufacturing a prototype buck conveter charger.

• Information Systems Review
• /
• v.12 no.1
• /
• pp.189-207
• /
• 2010

We applied IT ecosystem analysis to Smart Grid system in this paper and thereby compared various arguments about Smart Grid technologies against the reality of the power generation and distribution in South Korea with a special attention to the power distribution side. Our work attempts to propose policy implications in the government-level based on a firm-level analysis using the framework of the competitive strategy and advantage. The Smart Grid initiative is expected to enhance the efficiency in the power generation and distribution. In addition, the Smart Grid initiative aims at capturing the opportunities in the electric power business such as parts, components, supplies, and system products in the global arena. Prerequisites of smart distribution system include building infrastructure based on smart distribution parts, information systems, communication technologies, and developing various application programs and interfaces that would interact with the consumers. Consumers are expected to play an integral role by changing their consumption patterns in response to dynamic pricing and quality choices enabled by the smart distribution technologies. In order to induce the consumers to participate actively in the program, firms and policy makers should consider providing consumers economic incentives and proper education for better understanding of new technologies. Our work helps policy makers and firm better understand the nature of technology and stakeholders for the successful implementation of smart distribution technologies.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.443-450
• /
• 2017

Nowadays, Power Line Communication (PLC) is gaining high attention from industry and electric supply companies for the services like demand response, demand side management and Advanced Metering Infrastructure (AMI). The reliable services to consumers using PLC can be provided by utilizing an efficient PLC channel for which sophisticated channel modeling is very important. This paper presents characterization of a Low Voltage (LV) access network for Narrowband Power Line Communications (NB-PLC) using transmission line (TL) theory and a Simulink model. The TL theory analysis not only includes the constant parameters but frequency selectivity is also introduced in these parameters such as resistance, conductance and impedances. However, the proposed Simulink channel model offers an analysis and characterization of capacitive coupler, network impedance and channel transfer function for NB-PLC. Analysis of analytical and simulated results shows a close agreement of the channel transfer function. In the absence of a standardized NBPLC channel model, this research work can prove significant in improving the efficiency and accuracy of NB-PLC communication transceivers for Smart Grid communications.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.94-100
• /
• 2016

A virtual power plant (VPP) technology is a cluster of distributed generation installations. VPP system is that integrates several types of distributed generation sources, so as to give a reliable overall power supply. Virtual power plant systems play a key role in the smart grids concept and the move towards alternative sources of energy. They ensure improved integration of the renewable energy generation into the grids and the electricity market. VPPs not only deal with the supply side, but also help manage demand and ensure reliability of grid functions through demand response (DR) and other load shifting approaches in real time. In this paper, utilizing a variety of distributed generation resources(such as emergency generator, commercial generator, energy storage device), activation scheme of the virtual power plant technology. In addition, through the analysis of the domestic electricity market, it describes a scheme that can be a virtual power plant to participate in electricity market. It attempts to derive the policy support recommendation in order to obtain the basics to the prepared in position of power generation companies for the commercialization of virtual power plant.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.127-141
• /
• 2014

A Vehicle Tracking System consists of GPS tracking device which fits into the vehicle and captures the GPS location information at regular intervals to a central GIS server, and GIS tracking server providing three major responsibilities: receiving data from the GPS tracking unit, securely storing it, and serving this information on demand of the user. GPS based tracking systems supporting a multi-session processing among RMA, RM, and RCP can make a quick response to various services including other vehicle information between RSU and OBU on demand of the user. In this paper we design RSU lower layers and RCP applications in OBU for a multisession processing simulation and test message processing transactions among RMA-RM and RM-RCP. Furthermore, we implement the additional functions of handling access commands simultaneously on multiple service resources which are appropriate for the experimental testing conditions. In order to make a multi-session processing test, it reads 30 resource data,0002/0001 ~ 0002/0030, in total and then occurs 30 session data transmissions simultaneously. We insert a sequence number field into a special header of dummy data as a corresponding response to check that the messages are received correctly. Thus, we find that GIS service system with a multi-session processing is able to provide additional 30 services in a same speed of screen presentation loading while identifying the number of session processing of Web GIS service, the number of OBU service, and the speed of screen presentation loading by comparing a single session and a multi-session of GIS service system.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.256-259
• /
• 2001

An increase of pulsed power demand and load variation produce bad effect to power system. This causes power factor decrease. This paper proposes the excitation of the secondary side of wound rotor induction machine as one of harmonic compensation systems. In this paper, a harmonic compensation scheme based on stator flux-oriented vector control is proposed. By using the flux-oriented vector control, a voltage source PWM(Pulse Width Modulation) control scheme can be applied with fast dynamic response time. The designed control scheme is verified through simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.228-231
• /
• 2015

In power system research fields, one of current key issues is the construction and commercialization of micro grid site which is called green island, carbon zero island, energy independent island, building micro grid, etc. and various affiliated technologies have been being vigorously developed to realize. In addition, various researches about electric vehicles (EVs) are in progress and it is expected to penetrate rapidly with the next a few years. Some new load models should be developed integrating with electric vehicle loads because the EVs' deployment could cause the change of load composition rate on power system planning and operations. EVs are also resources for micro grid as well as distributed generation and demand response so that various supply and demand side resources should be considered for micro grid researches. In this paper, the load composition rate of residential sectors is prospected considering the deployment of EVs and the resource configuration of micro grid is optimized based on net present cost. In the optimization, the load patten of case studies includes EV's charging characteristics and various cases are simulated comparing micro grid environment and normal condition. HOMER is used to compare various cases and economic effects.