• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.126-139
• /
• 2011

In the traditional four-step travel demand models, each step is sequentially conducted following the model estimation at the previous step. The accuracy of the following model is partly dependent on whether the model at the former stage was properly established or not. Therefore, trip generation, which is the first step in this conventional model, has great effects on the modeling process and forecasting results. Linear regression models for trip generation of Seoul Metropolitan Area might increase the forcasting errors, since a variety of land-use characteristics are not considered. Hence, in this study, zonal factors such as socioeconomic and land use variables are included to improve the elaboration of trip generation. Comparing the %RMSE with the existing models, which contain bigger errors in the zones highly based on the secondary and tertiary industries than residence-based, the trip generation models including those variables seem more appropriate overall.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• The Korean Journal of Applied Statistics
• /
• v.29 no.4
• /
• pp.581-594
• /
• 2016

We introduce innovations state space exponential smoothing models (ISS-ESM) that can analyze time series with multiple seasonal patterns. Especially, in order to control complex structure existing in the multiple patterns, the model equations use a matrix consisting of seasonal updating parameters. It enables us to group the seasonal parameters according to their similarity. Because of the grouped parameters, we can accomplish the principle of parsimony. Further, the ISS-ESM can potentially accommodate any number of multiple seasonal patterns. The models are applied to predict electricity demand in Korea that is observed on hourly basis, and we compare their performance with that of the traditional exponential smoothing methods. It is observed that the ISS-ESM are superior to the traditional methods in terms of the prediction and the interpretability of seasonal patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.617-631
• /
• 2019

In the four-step demand model, a gravity mode is used most commonly at the trip distribution stage. The purpose of this study was to develop a new friction factor that can express the accessibility property as a single friction factor to compensate for the variable limits of the gravity model parameters (travel time, travel cost). To derive a new friction factor, a new friction factor was derived using the space syntax that can quantify the characteristics of the urban space structure, deriving the link-unit integration degree and then using the travel time and travel distance relationship. Calibration of the derived friction factor resulted in a similar level to that of the existing friction factor. As a result of verifying the various indicators, the explanatory power was found to be excellent in the short - and long - distance range. Therefore, it is possible to derive and apply the new friction factor using the integration index, which can complement the accessibility beyond the limit of the existing shortest distance, and it is believed to be more advantageous in future utilization.

• Journal of Internet Computing and Services
• /
• v.20 no.2
• /
• pp.51-59
• /
• 2019

In this paper, we analyzed the relationship between charging operation system and electricity charges connected with charging infrastructure among data of many demonstration projects focused on electric vehicles recently. At this point in time, due to the rapid increase in demand for the electric charging infrastructure that will take place in the future, we can prepare for an upcoming era in the sense of forecasting the demand value. At the same time, demonstrating and modeling optimized system modeling centering on sites is a prerequisite. The modeling based on the existing small - scale simulation and the design of the operating system are based on the data linkage analysis. In this paper, we implemented a new optimized system modeling and introduced it as a standard format to analyze time - dependent time - divisional data for each vehicle and user in each point and node. In order to verify the efficiency of the optimization based on the data linkage analysis for the actual implemented electric car charging infrastructure and operation system.

• Korea Journal of Hospital Management
• /
• v.25 no.4
• /
• pp.60-75
• /
• 2020

Purpose: This study aims to develop a cost model for NRP (Nursing Residency Program) operation and ultimately provide evidence for financial factors for NRP operation in the future by simulating a cost model. Methodology: This study developed a model for the NRP education cost calculation model based on the review of Hansen's model, which has systematically reported on the development and operation of NRP, and discussions with nursing education experts at a university-affiliated hospital. With the simulation, it was intended to predict nurses' supply and demand in the long term and to calculate changes in long-term education costs. Findings: Firstly, turnover model, term model, cost model necessary for calculating a model for the NRP education cost calculation model was set up. Secondly, the simulation showed the following results; 1) the proportion of newly graduated nurses less than 5 years of working decreases gradually over time, which will make the composition of nurses more balanced. 2) In the first year of the partial introduction of NRP, the cost of training new nurses was about 2.1 times higher than before. After the introduction, the training cost in the 13th year began to be lesser than before the introduction, and in the 25th year, it decreased by 28.1% compared to before the introduction. Practical Implications: Firstly, NRP would be an effective way to solve the higher turnover and frequent departure of new nurses and the imbalance of nurses' composition. Secondly, although the costs of NRP are incurred in the early stages, in the end, NRP training costs are reduced compared to before the introduction of NRP. It is necessary to systematically understand the contribution effect of NRP by analyzing the economic value of NRP considering financial and non-monetary returns in the future and providing a basis for decision-making related to NRP implementation.

• Journal of Korea Trade
• /
• v.25 no.4
• /
• pp.17-36
• /
• 2021

Purpose - This study provides useful information to stakeholders by forecasting the tramp shipping market, which is a completely competitive market and has a huge fluctuation in freight rates due to low barriers to entry. Moreover, this study provides the most effective parameters for Baltic Dry Index (BDI) prediction and an optimal model by analyzing and comparing deep learning models such as the artificial neural network (ANN), recurrent neural network (RNN), and long short-term memory (LSTM). Design/methodology - This study uses various data models based on big data. The deep learning models considered are specialized for time series models. This study includes three perspectives to verify useful models in time series data by comparing prediction accuracy according to the selection of external variables and comparison between models. Findings - The BDI research reflecting the latest trends since 2015, using weekly data from 1995 to 2019 (25 years), is employed in this study. Additionally, we tried finding the best combination of BDI forecasts through the input of external factors such as supply, demand, raw materials, and economic aspects. Moreover, the combination of various unpredictable external variables and the fundamentals of supply and demand have sought to increase BDI prediction accuracy. Originality/value - Unlike previous studies, BDI forecasts reflect the latest stabilizing trends since 2015. Additionally, we look at the variation of the model's predictive accuracy according to the input of statistically validated variables. Moreover, we want to find the optimal model that minimizes the error value according to the parameter adjustment in the ANN model. Thus, this study helps future shipping stakeholders make decisions through BDI forecasts.

• Journal of Internet Computing and Services
• /
• v.23 no.6
• /
• pp.87-96
• /
• 2022

This paper is an empirical analysis as a reference model that can predict up to the maximum number of elementary school student care needs in local governments across the country. This study analyzed and predicted the characteristics of the region based on machine learning to predict the demand for elementary care in a new apartment complex. For this purpose, a total of 292 variables were used, including data related to apartment structure, such as number of parking spaces per household, and building-to-land ratio, environmental data around apartments such as distance to elementary schools, and population data of administrative districts. The use of various variables is of great significance, and it is meaningful in complex analysis. It is also an empirical case study that increased the reliability of the model through comparison with the actual value of the basic local government.

• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.1
• /
• pp.1-13
• /
• 2022

The Yongin Light Rail train was manufactured by Bombardier Transportation in Canada in 2008 and is a privately invested railway line that has been operating in Yongin-si, Gyeonggi-do, since 2013. When the frequency of train failure increases due to aging, and there is a delay in the delivery period of imported parts used in the Bombardier manufactured trains, timely vehicle maintenance may not be performed due to lack of parts. To solve this problem, it is necessary to build a 'vehicle parts maintenance demand forecasting system' that analyzes the accurate and actual maintenance demand annual based on the condition of vehicle parts. The full scope of analysis in this paper analyzes failure data from various angles after opening of Yongin light rail vehicle to analyze failure patterns for each part and identify replacement cycles according to possible failures and consumption of parts. Based on this study, it is expected that Yongin Light Rail's maintenance system will change from the existing time-based replacement (TBM) concept to the condition-based maintenance (CBM) concept. It is expected that this study will improve the efficiency of the Yongin Light Rail maintenance system and increase vehicle availability. This paper is a fundamental for establishing of a system for predicting the replacement timing of vehicle parts for Yongin Light Rail. It reports the results of data analysis on some vehicle parts.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.21-36
• /
• 2023

Activity-based modeling systems have increasingly been developed to address the limitations of widely used traditional four-step transportation demand forecasting models. Accordingly, this paper introduces the Activity-BAsed Traveler Analyzer (ABATA) system. This system consists of multiple components, including an hourly total population estimator, activity profile constructor, hourly activity population estimator, spatial activity population estimator, and origin/destination estimator. To demonstrate the proposed system, the emission impact of land use changes in the 5-1 block Sejong smart city is evaluated as a case study. The results indicate that the land use with the scenario of work facility dispersed plan produced more emissions than the scenario of work facility centralized plan due to the longer travel distance. The proposed ABATA system is expected to provide a valuable tool for simulating the impacts of future changes in population, activity schedules, and land use on activity populations and travel demands.