• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.8
• /
• pp.973-982
• /
• 1997

Effect of vortex generator on the heat transfer enhancement of electronic chips is investigated using naphthalene sublimation technique. Experiments are performed for a single chip and chip arrays, and shape of vortex generator, position of vortex generator, stream wise chip spacing and air velocity are varied. Local and average heat transfer coefficients are measured on the top surface of simulated electronic chips, and compared with those obtained without vortex generator. In case of a single chip, heat transfer augmentation is seen only on the upstream portion of chip surface, while heat transfer enhancement is found on the whole surface for chip arrays. Rectangular wing type vortex generator is found to be more effective than delta wing.

• Journal of Korea Multimedia Society
• /
• v.21 no.1
• /
• pp.18-25
• /
• 2018

In High Efficiency Video Coding (HEVC), integer motion estimation (IME) requires a large amount of computational complexity because HEVC adopts the high flexible and hierarchical coding structures. In order to reduce the computational complexity of IME, this paper proposes the search range reduction algorithm, which takes advantage of motion vectors similarity between different layers. It needs only a few modification for HEVC reference software. Based on the experimental results, the proposed algorithm reduces the processing time of IME by 28.1% on average, whereas its the $Bj{\emptyset}ntegaard$ delta bitrate (BD-BR) increase is 0.15% which is negligible.

• Journal of Astronomy and Space Sciences
• /
• v.3 no.1
• /
• pp.53-66
• /
• 1986

Isophotes and surface brightness distribution were obtained for the late type normal spiral galaxy NGC 7793 (morphological type SA(s)d) which is one of the Sculptor group. The calculated total luminosity $M_{T}$ is obtained as 9.44 and the corrected face on magnitude ${B_T}^{circ}$ is 9.10. The revised distance to this galaxy $\Delta$=3.1 Mpc (de Vaucouleurs and Davoust 1980) is used for calculating the absolute magnitude ${M_T}^{circ}$ = -18.36. From the isophotes, the position angle to the major axis is $101^{circ}$, the mean axial ratio is q=b/a =0.65, and the inclination is i=50$^{circ}$. The concentric indices $C_{21}$=1069 and $C_{32}$ =1.50 are well agreed to the average value of Sd type galaxies.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.14-21
• /
• 1997

In delay-optimized designs, timing failures due to manufacturing delay defects are more likely to occur because the average timing slacks of paths decrease and the system becomes more sensitive to smaller delay defect sizes. In this paper, the impact of delay optimized logic circuits on delay fault testing will be discussed and compared to the case for non-optimized designs. First, we provide a timing optimization procedure and show that the resultant density function of path delays is a delta function. Next we also discuss the impact of timing optimization on the yield of a manufacturing process and the defect level for delay faults. Finally, we will give some recommendations on the determination of the system clock time so that the delay-optimized design will have the same manufacturing yield as the non-optimized design and on the determination of delay fault coverage in the delay-optimized design in order to have the same defect-level for delay faults as the non-optimized design, while the system clock time is the same for both designs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.114-117
• /
• 2001

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$(x=0.10, 0.15, 0.20) ceramics were fabricated by the mixed-oxide method and their structural and dielectric properties were investigated with variation of composition ratio and sintering temperature. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around $1020^{\circ}C$ due to the formation of the polycrystalline perovskite phase. BSCT(50/40/10) specimen sintered at $1500^{\circ}C$ showed the highest average grain size(18.25$[{\mu}m]$). Curie temperature and dielectric constant at room temperature decreased with increasing amount of Ca. BSCT(50/40/10) specimen sintered at $1450^{\circ}C$ showed a good dielectric constant, K, (=4324) and dielectric loss, $tan{\delta}$, (=0.972%) properties at 1[KHz].

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.109-113
• /
• 2007

The surface molecular motion of monodisperse polystyrene (PS) films was examined using scanning vis-coelasticity microscopy (SVM) in conjunction with lateral force microscopy (LFM). The dynamic storage modulus, E', and loss tangent, $tan\delta$, at a PS film surface with number-average molecular weights, $M_n$, smaller than 30 k were found to be smaller and larger than those for the bulk sample, even at room temperature, meaning that the PS surface is in a glass-rubber transition or fully rubbery sate at this temperature when the $M_n$ is small. In order to quantitatively elucidate the dynamics of the molecular motion at the PS surface, SVM and LFM measurements were performed at various temperatures. The glass transition temperature, $T_g$, at the surface was found to be markedly lower than the bulk $T_g$, and this discrepancy between the surface and bulk became larger with decreasing $M_n$. Such an intensive activation of the thermal molecular motion at the PS surfaces can be explained in terms of an excess free volume in the vicinity of the film surface induced by the preferential segregation of the chain end groups.

• Journal of the military operations research society of Korea
• /
• v.12 no.1
• /
• pp.106-121
• /
• 1986

In this study, estimators which shrink towards other than the origin are developed. We discuss the harmonic mean of the observations as a reasonable center and develop estimators which shrink the MLE(${\delta}^{\circ}$) towards the harmonic mean under the loss function $L_1$. The percentage reduction of average loss(PRAL) of derived estimators compared to the usual estimator(MLE) under the loss function $L_1$ is estimated for p=4 and 8. Computer simulation shows that the risk performance of the derived estiamtors is remarkably good when the means are greater than three.

• The Journal of Industrial Distribution & Business
• /
• v.6 no.2
• /
• pp.25-30
• /
• 2015

Purpose - Could blood type provide the key to wellness and affect our personality? The theory that blood type is linked to personality (and other mental and physical qualities) is popular mostly in Japan, although it has carried over to Taiwan and South Korea. Research Design, Data, and Methodology - Questionnaires were distributed to 380 production line company employees. The reliability and validity of the questionnaires were examined through independence testing and the average ratio comparison of the two populations. Additionally, using Pearson's chi-square formula, the relationship between the blood group (independent variable) and general group participation (dependent variable) was tested along with the Schuprow coefficient. Result - The prioritization of blood groups over the general group participation was identified and the following results were obtained: Individual group participation is affected by personality features derived from temperament, mood, and other characteristics. Conclusion - The study showed that individual blood groups have an effect on their group cooperation, and among blood groups, blood group A had the greatest tendency to group participation, followed by blood groups O, AB, B, respectively.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.260-263
• /
• 2006

This letter proposes a new near-lossless image compression method with only one line buffer cost for a digital camera with Bayer format image. For such format data, it can provide a low average compression rate (4.24bits/pixel) with high-image quality (larger than 46.37dB where the error of every pixel is less than two). The experimental results show that the near-lossless compression method has better performance than JPEG-LS (lossless) with ${\delta}$ = 2 for a Bayer format image.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.9
• /
• pp.739-745
• /
• 1998

The objective of this paper is to provide experimental data of Er(rare- earth)doped $SiO_2$thin film made by sputtering methods. The deposition rate of silica glass by sputtering method was 55$\AA$/min. In EDD measurements, the average Er concentration in the deposited film was 0.77(wt%). After annealing at $900^{\circ}C$, the Cl concentration decreased from 3.79(wt%) to 1.52(wt%). The refractive indices of the core $n_1$, cladding $n_2$ were 1.458, 1.558 respectively at 632.8 nm. The refractive index difference between core and cladding, $\Delta$n was 0.1. The refractive index profile of core and cladding interface shows step profile. In the study, $SiO_2$ glass films of Si wafer were successfully doped with active erbium. Therefore, this experimental data will be applicable for fabrications of Er doped planar integrated optical device.