• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.724-729
• /
• 2014

This paper presents the altitude control of a quadrotor system under the disturbance. The altitude is measured by an ultra sonic sensor attached at the bottom of the quadrotor system and the measured altitude data are used in the time-delayed controller. To test the robustness of the controller, a weight attached to the center of the system is dropped intentionally several times to cause disturbances to the system. Performances of the altitude control by the PID control and time-delayed control method are compared experimentally. Experimental studies are conducted to verify the outperformance of the time-delayed controller for controlling the altitude of the quadrotor system under disturbances.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.137-142
• /
• 1991

For the constitution of forage cropping system including the double-cropping of corn, attention has been directed towards the early and short maturing varieties of corn such as Comet 80, Comet 85 and Linda as a component forage crop of forage cropping system. Four corn varieties, Comet 80, Comet 85, Linda and Suwon 19 were planted delayedly by each of 45, 55 and 65 days from the recommended sowing date of suwon 19. Under these condition, growth characteristics and late-sowing adaptability of 4 corn varieties were investigated, and the results are summarized as follows; 1. The variety of suwon 19 did not reach the stage of silking in the occasion of late sowing by 50 days from the optimum sowing time for mono cropping of suwon 19. However early varieties such as Comet 80, Comet 85 and Linda silked under the condition of 65 days-delayed sowing from the recommended sowing time of Suwon 19 for mono-cropping. 2. Early varieties of Comet 80, Comet 85 and Linda were so grown by approximately 92% in plant height, 66% in ear height, 88% in stem diameter and 81% in leaf number respectively compared to Suwon 19 at each of three delayed sowing time that exhibited the dwarfish appearance of canopy. 3. Days from sowing to silking decreased as the sowing time was delayed and the average days from sowing to silking in the sowing treatments of 55 days-delayed of Suwon 19, Comet 80, Comet 85 and Linda were 61, 46, 47 and 51 days, respectively. 4. The size of variations of plant height and ear height influenced by delayed-sowing time was comparatively larger in the varieties of Suwon 19 and Linda than in those of Comet 80 and Comet 85. 5. As sowing time was delayed from the optimum sowing time of Suwon 19 for mono-cropping, ear content decreased from 0% of Suwon 19 at 55 day-delayed sowing treatment to 3540% of Comet 80 and Comet 85 at 65 days-delayed sowing treatment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1201-1204
• /
• 1996

The previous results on LTR methods for time delay systems need the solution of the operator-type Riccati equation. In addition, it can be difficult to make the target loop shape representing the design specification. This paper proposes a new LTR method for input-delayed systems using well-established LTR method for non-delay systems. For doing this, a time delay margin is derived and the time delay of the input-delayed systems is assumed less than equal to the time delay margin. A simple example is presented for illustrations.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.607-614
• /
• 1999

This paper deals with the design problem of the state estimator for servo system. The servo system has input time delay which depends on the computational time of control algorithm. The delayed input is a factor that brings out the state estimation error. So in order to reduce the state estimation error of the system, we propose a state estimator in which the delayed input of the system is considered. For this purpose, discrete time state space model is established accounting for the delayed input and a state estimator is designed based on this model. Kalman filter algorithm is employed in the design of the state estimator. The proposed estimator is used in the speed control of servo system with delayed input. Performance of the proposed state estimator is exemplified via simulations and experiments for servo system. Also, robustness of the proposed estimator to modeling error by variation of the system parameters is also shown in simulations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2562-2567
• /
• 2005

This paper suggests a new method discretization of nonlinear system using Taylor series expansion and zero-order hold assumption. This method is applied into the sampled-data representation of a nonlinear system with input time delay. Additionally, the delayed input is time varying and its amplitude is bounded. The maximum time-delayed input is assumed to be two sampling periods. Them mathematical expressions of the discretization method are presented and the ability of the algorithm is tested for some of the examples. And 'hybrid' discretization scheme that result from a combination of the ‘scaling and squaring' technique with the Taylor method are also proposed, especially under condition of very low sampling rates. The computer simulation proves the proposed algorithm discretized the nonlinear system with the variable time-delayed input accurately.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.204-208
• /
• 2001

Position control of the electro-hydraulic servo indexing system in a flexible forging machine was investigated Flexible forging machine forges an axial type workpiece in the radial direction as well as in the axial direction. The role of the indexing system is to rotate a workpiece fast and accurately to a desired position for continuous shaping. Since the inertia of a workpiece changes during each forging step, a control technique which is robust to inertia variation should be adopted to the position control of the workpiece. In this study, time delayed control technique is applied to the servo system. Time delayed control method does not depend on estimation of specific parameters. Rather, it depends on the direct estimation of a function representing the effect of uncertainties. Direct estimation is accomplished using time delay and the gathered information is used to cancel the unknown dynamics is accomplished using disturbances simultaneously. Experimental result show that the time delayed controller is robust to inertia variation of the load, and satisfactory performance on the sposition accuracy is obtained compared to the contentional feedback control.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.570-575
• /
• 2000

This paper presents a delayed time path planning method of the Autonomous Mobile Robot using fuzzy logic controller for avoidance of obstacles in unknown environment. It is the objective of this paper to develop fuzzy control algorithms using delayed time techniques to deal with moving obstacles randomly. This control method gives the benefit of the collision free movement in real time and optimal path to the pre-settled goal. The computer simulations are demonstrated the effective of the suggested control method in obstacle avoidance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.79-84
• /
• 1989

This paper proposed the new control law which is defined by instantaneous output and time delayed output. To analyze the system with time delayed output, the way which transforms output time delayed systEms into instantaneous output systems is presented. The output responses were more improved by the new control law thEn that of the instantaneous output control law. The algorithem for simulation and a numerical exemple are presented.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.23-29
• /
• 2016

This paper presents balancing control of a two-wheel mobile robot (TWMR). TWMR is aimed to maintain balance while moving. Although TWMR can be controlled by linear controllers such as PD controller, time-delayed controller is employed for robustness. Performances of PD controllers and time-delayed controllers are compared. Especially, experimental studies on different acceleration estimation for the time-delayed controller are conducted. Performances by different acceleration estimations of the balancing angle, of the position, and of both angle and position are compared empirically.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.148-154
• /
• 2009

In this paper, an embedded Kalman filter for a time-delayed controller is designed on an FPGA to estimate accelerations of the robot arm. When the time-delayed controller is used as a controller, the inertia estimation along with accelerations is needed to form the control law. Although the time-delayed controller is known to be robust to cancel out uncertainties in the nonlinear systems, performances are very much dependent upon estimating the acceleration term ${\ddot{q}}(t-{\lambda})$ along with inertia estimation ${\hat{D}}(t-{\lambda})$. Estimating accelerations using the finite difference method is quite simple, but the accuracy of estimation is poor specially when the robot moves slowly. To estimate accelerations more accurately, various filters such as the least square fit filter and the Kalman filter are introduced and implemented on an FPGA chip. Experimental studies of following the desired trajectory are conducted to show the performance of the controller. Performances of different filters are investigated experimentally and compared.