• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.116-124
• /
• 2006

Remarkable winter season warming has been observed in East Asian countries during the last century. Accordingly, significant effects on dormancy and the resulting budburst of deciduous trees are expected. However phenological observations are rare and insufficient compared with the long-time climate records in the same region. A chill-day accumulation, which can be estimated from daily maximum and minimum temperature, is expected to make a reasonable proxy for dormancy depth of temperate zone fruit trees. To simulate dormancy depth during 1921-2004, a chill-day model parameterized for 'Campbell Early' grapevine, which is the major cultivar grown virtually anywhere in South Korea, was applied to daily temperature data at 8 locations in South Korea. The calculations showed that the chilling requirement for breaking endo-dormancy of this grapevine cultivar can be satisfied by mid-January to late February in South Korea, and the date was delayed going either northward or southward from the 'Daegu-Jeonju' line crossing the middle of South Korea in the east-west direction. Maximum length of the cold tolerant period (the number of days between endo-dormancy release and forced dormancy release) showed the same spatial pattern. When we divide the 83 years into 3 periods (I: 1921-1950, II: 1951-1980, and III: 1981-2004) and get the average of each period, dormancy release date of period III was accelerated by as much as 15 days compared with that of period I at all locations except Jeju (located in the southernmost island with subtropical climate) where an average15-day delay was predicted. The cold- tolerant period was also shortened at 6 out of 8 locations. As a result, budburst of 'Campbell Early' in spring was accelerated by 6 to 10 days at most locations, while inter-annual variation in budburst dates was increased at all locations. The earlier budburst after the 1970s was due to (1) warming in winter resulting in earlier dormancy release (Incheon, Mokpo, Gangneung, and Jeonju), (2) warming in early spring accelerating regrowth after breaking dormancy (Busan and Jeju), and (3) both of them (Seoul and Daegu).

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2014

Purpose: In order to know the effectiveness of ultrasonographic examination in diagnosis and follow-up evaluation for the frozen shoulder, we compared those with contralateral side in initial and after steroid injection. Materials and Methods: For the 20 unilateral frozen shoulder from July 2012 to July 2013, ultrasonographic examination was tried using reference line 1 (CBT: distance from coracoid process to LHB tendon) and line 2 (CBG: distance from coracoid process to bicipital groove). We tried 1 time steroid injection and compared the improvement in gross motion and reference line with 2 month, 4 month, and 6 month's serial ultrasonographic examination. Results: The differences on CBT line between lesion side and normal side were -5.6 mm, -5.0 mm, and -4.3 mm in neutral (Neut), external rotation (ER) and internal rotation (IR), respectively. The differences on CBG line were -6.1 mm, -4.7 mm, and -5.0 mm respectively (p<0.05). The changes in the reference line after steroid injection were evaluated at 2 month (CBT: -4.8 mm, -3.5 mm, -2.6 mm / CBG: -4.7 mm, -4.0 mm, -3.6 mm), 4 month (CBT: -4.7 mm, -3.2 mm, -1.7 mm / CBG: -4.3 mm, -3.7 mm, -1.2 mm), and 6 month (CBT: -1.1 mm, -2.9 mm, -0.5 mm / CBG: -1.2 mm, -0.7 mm, -0.9 mm). The gross motion was improved at 4 month after injection, from elevation $108^{\circ}$, ER $32^{\circ}$, IR L5 in initial to $133^{\circ}$, $42^{\circ}$, L3 respectively (p<0.05). Pain improved from 7.5 in initial to 3.0 at 2 month on visual analog scale (VAS). Conclusion: The serial examination after steroid injection revealed that the delayed improvement on reference line (6 month) compared with pain (2 month) or gross motion (4 month). Dynamic ultrasonogram was useful in diagnosis and follow-up evaluation of frozen shoulder.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1701-1708
• /
• 2007

Seed pelleting is generally conducted in order to save the labor for sowing and thinning by enabling the precision mechanical planting. In the present study, the influence of physical and chemical properties of pelleting solid materials was investigated on carrot seed germination. Among the pelleting solid materials evaluated, dialite, kaolin, and talc showed low bulk density and high porosity. Bentonite and dialite carried high water holding capacities of 184% and 173%, respectively, while calcium carbonate, calcium oxide, and fly ash showed relatively low water holding capacity. The pH of kaolin (6.8) and dialite (7.4) were close to neutral, while limestone (12.8), calcium oxide (13.0), and bentonite (10.0) were highly basic. High electro-conductivity was shown in limestone and calcium oxide. EDS analysis revealed that the main elemental compositions of talc were Si (71.0%) and Mg (29.0%), and those of calcium carbonate were Ca (66.6%), Si (22.9%), and Mg (10.5%). High granulation capacity was observed from talc and the mixture of talc and calcium carbonate. Seeds pelleted with bentonite showed the highest hardness. The dissolving type of the pellet layer after imbibition was split type in talc, limestone, zeolite, and fly ash, melt type in calcium carbonate and calcium oxide, and swell type in bentonite and vermiculite. The shortest dissolving time of pellet layer was observed from calcium carbonate and kaolin. The germination speed $(T_{50})$ was delayed as the size of pelleted seeds increased. The optimum size of pelleting was 19 ratio in carrot.

• Journal of Food Hygiene and Safety
• /
• v.3 no.4
• /
• pp.225-232
• /
• 1988

To improve the storage method for Kimchi, optimal ripening Kimchi was irradiated with doses of 1,3,5 kGy Co-GO gamma radiation, followed by the microbiological, physicochemical and sensory evaluations during storage at $5^{\circ}C$. 1. Total aerobic count increased in the beginning of storage and then decreased slowly as the number of total lactobacilli (anaerobe) increased. The above total aerobic and lactobacilli were reduced by 1 to 3 log cycles with irradiation and at the 90th day after storage the number of total lactobacilli remained $1.30{\times}10^{8}\;per\;ml$ in3 kGy irradiated group. Irradiation treatment at 3 kGy sterilized coli forms and molds contaminating the sample as the level of $2.0{\times}10^{4}\;per\;ml\;and\;5.4{\times}10^{2}\;per\;ml$, respectively and no apparent growth was observed in both control and 1 kGy irradiated groups after 20 days of storage. The population.of yeast, $3.5{\times}10^{3}\;per\;ml$ initially, in, creased steadily during Kimchi storage and at 90 days of storage the number was shown to be $5.6{\times}10^{4}\;per\;ml\;and\;6.5{\times}10^{2}\;per\;ml$ in control and 3 kGy irradiated groups, respectively. 2. In the physicochemical changes during Kimchi storage, pH, acidity and volatile acid of non-irradiated control at the 45th day after storage were 4.0,0.7% and 0.066%, while those of 3 kGy irradiated group were 4.2, 0.59 and 0.06% at the 90th day of storage, respectively. The reducing sugar content of all stored samples changed inversely total acidity content, indicating irradiation delayed the changes of them. The amount of aseorbic acid decreased gradually with the storage time and irradiation dose increase. Textural parameters of 3 kGy irradiated group were superior to those of other groups at the latter stage of storage. 3. Sensory evaluations showed that 3 kGy irradiation was the optimum dose level to extend tite shelf-life of Kimchi more than two months as compared to control.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.225-233
• /
• 2019

This study was conduct to investigate the effect of mixed seed sowing and flour blending on the uniformity of flour quality of Korean domestic wheat. Two wheat varieties (Keumkang and Baegjoong) were selected for sowing mixed seeds, and their growth characteristics and flour quality were analyzed. Quality of flour blending with the same varieties was also evaluated. The ratios for mixed seed sowing and flour blending were from 0 to 100% with a 10% increase of interval for each treatment. On increasing the portion of Baegjoong in mixed seed sowing, the heading time was a little delayed, however, yield increased. The results of the flour quality showed lower damaged starch content and sodium carbonate SRC (solvent retention capacity) value for Keumkang than for Baegjoong. Protein quantity by protein content and quality by SDSS (Sodium Dodecyle Sulfate-Sedimentation) volume, lactic acid SRC, and mixograph pattern of Keumkang were superior to those of Baegjoong. Compared with mixed seed sowing, overall quality characteristics of flours with different ratios showed predictable and proportional change by flour blending. This demonstrated the successful application of flour blending, compared with mixed seed sowing, for improving the uniformity of flour quality.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.36-43
• /
• 2018

In this study, we investigated the inhibition effect of various herbs on the rancidity of soybean oil. The antioxidant activity of herb-infused oils was evaluated by examining their total phenolic contents and DPPH radical scavenging abilities. The total phenolic contents were found to increase with addition of herbs to the soybean oil. Rosemary-infused oil (RO) exhibited the highest total phenolic contents ($77.28{\mu}g\;GE/mL$), followed by the lemon-balm-infused oil (LO), green-tea-infused oil (GO), and soybean oil (SO) alone (36.82, 36.66, and $21.24{\mu}g\;GE/mL$, respectively). Similary, the DPPH radical scavenging activity of the herb infused oil also increased. Moreover, measurements on the total polar compound (TPC) contents, acid value, and p-anisidine value were carried out in order to confirm the changes in the rancidity of the oils during frying. The time for the TPC content to reach 25% was confirmed to be delayed from 62 h for SO to 68 h, 74 h, and 80 h for GO, RO, LO, respectively. Even though there were some differences between the p-anisidine and acid values, it was confirmed that the addition of herbs inhibited the rancidity of soybean oil. Therefore, the results in this study show that adding herbs to soybean oil could positively contribute to the inhibition of oxidation and rancidity.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2021

Cyber Kill Chain is derived from Kill chain of traditional military terms. Kill chain means "a continuous and cyclical process from detection to destruction of military targets requiring destruction, or dividing it into several distinct actions." The kill chain has evolved the existing operational procedures to effectively deal with time-limited emergency targets that require immediate response due to changes in location and increased risk, such as nuclear weapons and missiles. It began with the military concept of incapacitating the attacker's intended purpose by preventing it from functioning at any one stage of the process of reaching it. Thus the basic concept of the cyber kill chain is that the attack performed by a cyber attacker consists of each stage, and the cyber attacker can achieve the attack goal only when each stage is successfully performed, and from a defense point of view, each stage is detailed. It is believed that if a response procedure is prepared and responded, the chain of attacks is broken, and the attack of the attacker can be neutralized or delayed. Also, from the point of view of an attack, if a specific response procedure is prepared at each stage, the chain of attacks can be successful and the target of the attack can be neutralized. The cyber command and control system is a system that is applied to both defense and attack, and should present defensive countermeasures and offensive countermeasures to neutralize the enemy's kill chain during defense, and each step-by-step procedure to neutralize the enemy when attacking. Therefore, thist paper proposed a cyber kill chain model from the perspective of defense and attack of the cyber command and control system, and also researched and presented the threat classification/analysis/prediction framework of the cyber command and control system from the defense aspect

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.419-427
• /
• 2021

In South Korea, direct seeding of rapeseed (Brassica napus L.) is difficult during spring cultivation in early March because of the low yield production associated with late flowering and poor seed quality. To compare the period of direct sowing, the present study investigated the growth characteristics of rapeseed according to planting dates. Specifically, 35 day-old seedlings were transplanted or directly sown on four different dates (late February, early March, late March, and early April) in 2020 and 2021. As the planting date was delayed, the days to flowering of rapeseed decreased. Similarly, the plant height, seed set percentage, and seed yield of rapeseed were reduced upon delay in planting. The seed yield of rapeseed through direct seeding in late February was the highest, 2.76 ton·ha^-1. On all seeding dates, except for late February, the transplanted rapeseed produced a higher yields than the directly seeded rapeseed. The crude oil and oleic acid content, which is related to the quality of rapeseed, decreased with the delay in planting dates, and this decrease was greater, with the direct seeding of rapeseed depending on the sowing time. In the correlation analysis, the planting date was significantly and negatively correlated with the yield, crude oil content, and oleic acid content of the transplanted rapeseed, while the sowing date was negatively correlated with the plant height, silique size, yield, and seed quality of the directly seeded rapeseed. Finally, the effect of planting date on rapeseed growth was stronger in direct seeding than in transplanting. Therefore, during spring cultivation after late February to early March, transplanting, rather than direct seeding, in more advantageous in terms of seed quality and yield.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.1
• /
• pp.13-28
• /
• 2023

This study examines the process of project promotion in Busan, which introduced the private participation-type consultative body for the first time in the country in the promotion stage of the private-initiated park development project, and introduced flexible application of the system and differentiated policy elements in the implementation process, and examines the operational characteristics and we tried to analyze performance, etc. As a result of the analysis, first, the preferred bidder was selected by introducing a mixed method in the project method, which is an independent project method that cannot be seen in other local governments. Second, by specifying guidelines considering the characteristics of each park and detailed guidelines such as the location, area, and maximum height of non-park facilities, criteria for establishing a rational development plan utilizing regional identity and the basis of evaluation standards were laid. Third, in the project process, transparency was secured through the delegation-type roundtable, in which the private sector performs the functions and roles of key actors, thereby preventing disputes such as suspicion of preferential treatment. Fourth, in order to improve the quality of park facilities to be donated and to secure design adequacy, after approval of the implementation plan, a general planner was introduced and construction project management (design stage) services were performed to promote efficient implementation and specialization of luxury parks in the region. As a result, the city of Busan carried out the project efficiently by conserving 5 parks from sunset, a park area of 2.25km², and reducing land compensation and park construction costs by KRW 740 billion. Reinforcement of the public nature of the private-initiated park development project was suggested. However, due to the application of these systems and verification procedures, the project period is prolonged, and park services are delayed along with the financial burden on private operators.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.188-196
• /
• 2023

Among marine accidents caused by bad weather, visibility restrictions caused by sea fog occurrence cause accidents such as ship strand and ship bottom damage, and at the same time involve casualties caused by accidents, which continue to occur every year. In addition, low visibility at sea is emerging as a social problem such as causing considerable inconvenience to islanders in using transportation as passenger ships are collectively delayed and controlled even if there are local differences between regions. Moreover, such measures are becoming more problematic as they cannot objectively quantify them due to regional deviations or different criteria for judging observations from person to person. Currently, the VTS of each port controls the operation of the ship if the visibility distance is less than 1km, and in this case, there is a limit to the evaluation of objective data collection to the extent that the visibility of sea fog depends on the visibility meter or visual observation. The government is building a marine weather signal sign and sea fog observation networks for sea fog detection and prediction as part of solving these obstacles to marine traffic safety, but the system for observing locally occurring sea fog is in a very insufficient practical situation. Accordingly, this paper examines domestic and foreign policy trends to solve social problems caused by low visibility at sea and provides basic data on the need for government support to ensure maritime traffic safety due to sea fog by factually investigating and analyzing social problems. Also, this aims to establish a more stable maritime traffic operation system by blocking marine safety risks that may ultimately arise from sea fog in advance.