• Journal of Gastric Cancer
• /
• 제11권3호
• /
• pp.185-188
• /
• 2011

Gastric necrosis due to gastric outlet obstruction is a very rare condition, but it might be fatal if missed or if diagnosis is delayed. Our patient was a 73-year-old male complaining of abdominal pain, distension and dyspnea for 1 day. In plain radiography and computed tomography, a markedly distended stomach and decreased enhancement at the gastric wall were noted. He underwent explo-laparotomy, and near-total gastric mucosal necrosis accompanied by sludge from the soaked laver was noted. A total gastrectomy with esophagojejunostomy was performed, and he recovered without sequelae. Final pathologic examination revealed advanced gastric cancer at the antrum with near-total gastric mucosal necrosis.

• 전자공학회논문지SC
• /
• 제39권2호
• /
• pp.140-145
• /
• 2002

본 논문은 단락회로 전류를 없애기 위한 CMOS 버퍼회로에 대한 것이다. 최종 구동소자는 풀-업 PMOS와 풀-다운 NMOS로 구성하고 이를 구동하기 위해 두가지 경로를 입력신호로 선택되도록 하였다. 이러한 기법으로 최종 구동회로가 짧은 시간동안 tri-state가 되어 단락회로 전류를 차단하였다. 모의 실험결과 전원전압 3.3V에서 전력-지연 곱을 기존의 Tapered 버퍼[1]와 비교하여 약 42% 줄일 수 있었다

• The Korean Journal of Ecology
• /
• 제28권4호
• /
• pp.193-198
• /
• 2005

This study investigated the characteristics of the eggs and yolk sac larvae of Korean striped bitterling, Acheilognathus yamatsutae, spawned and grown In mussels. The number of eggs in the ovary was small ($358{\pm}108$ SD). The eggs were oval and large, and the formation of the perivitelline space was narrow. The eggs were hatched at only 41 hours after fertilization but the hatched larvae were underdeveloped. The development of yolk projection and minute tubercles on the skin surface was notable, along with the vividly moving tail in the hatched larvae. The yolk projection and minute tubercles were disappeared upon enhancement of the motor ability of the larvae was enhanced. The formation of eyes and body pigments of the larvae was relatively delayed in comparison with that of other cyprinid larvae. After completely consuming the yolks the larvae escaped from the mussel for free swimming and exogenous feeding.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.69-78
• /
• 1999

Hydroxyethyl cellulose -based-viscosity modifying admixture and melamine-basd-superplasticizer were selected to be admixtures for self-compacting concrete based on the test results of fluidity and air content of mortar using 3 different viscosity modifying admixtures. The experimental results show that the initial and final set of self-compacting concrete and fly ash concrete with viscosity modifying admixture only have been delayed approximately 5 hours and 8~9 hours, respectively. It is found that the optimum dosage of viscosity modifying admixtures, coarse aggregate and cement content are 0.2% of water content, under 742 kg/$\textrm{m}^3$ and over 364 kg/$\textrm{m}^3$, respectively. Test results also show that the optimum fly ash in replacement of cement is 10% of cement weight for the enhancement of fluidity and long-term strength.

• 한국가시화정보학회지
• /
• 제8권2호
• /
• pp.16-22
• /
• 2010

A flow visualization has been conducted to investigate unsteady flight characteristics of a model of dragonfly. The mechanism of lift generation by flapping wings is analyzed using smoke-wire and high speed camera. The experimental results of flow visualization show a discernible sequential dynamics that three mechanisms and high incidence angle of the wings are responsible for the lift generation. The leading edge vortex by the rapid acceleration of leading edge of the wing during initial stage of stroke causes a strong lift enhancement. Delayed stall during the stroke, fast supination and pronation of the wing near the end of each stroke are also responsible for the lift generation.

• International Journal of Contents
• /
• 제12권1호
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• 음성과학
• /
• 제8권2호
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.

• Investigative Magnetic Resonance Imaging
• /
• 제19권3호
• /
• pp.200-204
• /
• 2015

Image findings of hepatic lymphoma have been reported as variable, ranging from single or multiple small nodules to diffuse infiltrative patterns. On MRI, most hepatic lymphomas show T1 low signal intensity, T2 high signal intensity. Dynamic imaging reveals a hypointense appearance in the arterial phase, followed by delayed enhancement in the portal venous and transitional phase. In the hepatobiliary phase using a hepatocyte-specific contrast agent (which have recently aided in increasing the access to the focal liver lesions), hepatic lymphoma is known to exhibit low signal intensity. We report a case of hepatic lymphoma, which shows iso-signal intensity on hepatobiliary phase, using gadoxetic acid (Gd-EOB-DTPA).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1566-1569
• /
• 2008

The flow visualization is conducted in order to investigate an unsteady flight characteristic of a model dragonfly. The flapping wings are analyzed using smoke-wire and high speed camera. The results of this experiment show that three mechanisms and high incidence angle of the wings are responsible for the lift. The leading edge vortex, which is induced by the rapid acceleration of the wing at the beginning of a stroke, causes the lift enhancement. The delayed stall during the stroke and the fast supination and pronation of the wing near the end of each stroke are also responsible for the lift generation.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.53-57
• /
• 2016

The present study aims to experimentally investigate the evaporative heat transfer characteristics of Oxi-nitriding SPCC surface. Moreover, the heat transfer coefficient was examined with respect to surface temperature during droplet evaporation. In fact, the nitriding surface showed significant enhancement for anticorrosion performance compared to bare SPCC surface but the thermal resistance also increased due to the formation of compound layer. From the experimental results, the evaporative behavior of sessile droplet on nitriding surface showed similar tendency with the bare surface. Total evaporation time of sessile droplet on the nitriding surface was delayed less than 5%. The difference in heat transfer coefficient increased with the surface temperature, and the maximum difference was estimated to be around 11% at $80^{\circ}C$ surface. Thus, this nitriding surface treatment method could be useful for seawater heat exchanger industries.