• Journal of Internet Computing and Services
• /
• 제22권1호
• /
• pp.41-50
• /
• 2021

Cyber Kill Chain is derived from Kill chain of traditional military terms. Kill chain means "a continuous and cyclical process from detection to destruction of military targets requiring destruction, or dividing it into several distinct actions." The kill chain has evolved the existing operational procedures to effectively deal with time-limited emergency targets that require immediate response due to changes in location and increased risk, such as nuclear weapons and missiles. It began with the military concept of incapacitating the attacker's intended purpose by preventing it from functioning at any one stage of the process of reaching it. Thus the basic concept of the cyber kill chain is that the attack performed by a cyber attacker consists of each stage, and the cyber attacker can achieve the attack goal only when each stage is successfully performed, and from a defense point of view, each stage is detailed. It is believed that if a response procedure is prepared and responded, the chain of attacks is broken, and the attack of the attacker can be neutralized or delayed. Also, from the point of view of an attack, if a specific response procedure is prepared at each stage, the chain of attacks can be successful and the target of the attack can be neutralized. The cyber command and control system is a system that is applied to both defense and attack, and should present defensive countermeasures and offensive countermeasures to neutralize the enemy's kill chain during defense, and each step-by-step procedure to neutralize the enemy when attacking. Therefore, thist paper proposed a cyber kill chain model from the perspective of defense and attack of the cyber command and control system, and also researched and presented the threat classification/analysis/prediction framework of the cyber command and control system from the defense aspect

• Korean Journal of Breeding Science
• /
• 제42권6호
• /
• pp.632-637
• /
• 2010

'Hanseol' is a new very early-maturing, cold tolerant and high quality japonica rice variety developed from a cross of 'Jinbu24' and 'Jinbu25' by the rice breeding team of National Institute of Crop Science (NICS), Rural Development Administration (RDA) in 2009. The heading date of this variety is July 25, which is four days earlier than check variety, 'Jinbubyeo'. 'Hanseol' has 65 cm of culm length, 99 spikelets per panicle, 82.9% of ripened grain rate, and 21.5 g of 1,000 grain-weight of brown rice. This variety shows susceptibility to bacterial leaf blight and virus diseases, and insect pests. It is tolerant to cold stress in terms of less heading delay and high fertility in cold water irrigated cultivation. This variety shows delayed leaf senescence and considerable tolerance to viviparous germination at ripening stage. The milled rice of this variety exhibits translucent, clear non-glutinous endosperm and medium-short grain. 'Hanseol' showed low gelatinization temperature and 6.1% protein content, 19.1% amylose content and good palatability of cooked rice. The milled rice yield of this variety is about 5.43 MT/ha at ordinary culture in local adaptability test for three years. 'Hanseol' would be highly adaptable to mid-north and mid-mountainous areas, and mid-northern alpine area in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제64권2호
• /
• pp.63-69
• /
• 2019

Black-colored rice contains anthocyanin, which has an antioxidant function on the seed coat. Anthocyanin content is greatly affected by the cultivation environment, especially the average temperature during the ripening stage. Generally, low temperatures during the ripening stage increase anthocyanin content. To control the average temperature during ripening stage in the field, transplanting time has to be regulated. In this study, anthocyanin content variation was examined in relation to the transplanting time and the average temperature during the ripening stage. For the study, fourteen black-colored rice cultivars with different maturity types (four of early-maturing, five of medium-maturing, and five of medium-late maturing) were selected. The transplanting times used were May 20, June 5, June 20, and June 30. The field experiment was conducted in the Miryang, Kyoungsangnamdo province, Korea from 2014 to 2017. The anthocyanin content in all cultivars was higher when the transplanting time was delayed, and the highest anthocyanin content was observed in the transplanting on June 30. Variation in anthocyanin content according to the change in transplanting time is the greatest in the early maturing cultivars. The least change was observed in medium maturing cultivars. Regression analysis showed a significant correlation between temperature and anthocyanin content, but the degree of correlation was very low in the medium maturing cultivar. As a result, the optimal average temperature during the grain filling stage for increasing the anthocyanin content of black colored rice was $22{\sim}23^{\circ}C$. The rice yield increased in plants transplanted until June 20 and decreased thereafter owing to low temperature during the grain filling stage. The anthocyanin content increased with delaying the transplanting time up to June 30 but the rice yield decreased after June 20. Nevertheless, the rate of increase in anthocyanin content was higher than the rate of decrease in rice yield. As a result, the optimum transplanting time and an average temperature of grain filling stage for black-colored rice variety were June 30 and $23{\sim}24^{\circ}C$ considering both anthocyanin content and rice yield.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• 제18권3호
• /
• pp.99-106
• /
• 2018

Mucolipidosis type III (pseudo-Hurler polydystrophy) is a mucolipids degrading disorder caused by a mutation in the GNPTAB gene and is inherited by autosomal recessive. It is diagnosed by examining highly concentrated mucolipids in blood and the diagnosis can be confirmed by genetic testing. Mucolipidosis type III is a rare and progressive metabolic disorder. Its initial signs and symptoms usually occur around 3 years of age. Clinical manifestations of the disease include slow growth, joint stiffness, arthralgia, skeletal abnormalities, heart valve abnormalities, recurrent respiratory infection, distinctive facial features, and mild intellectual disability. Here, we are presenting two siblings of mucolipidosis type III, a 4-year-old female and a 2 years and 7 months old male with features of delayed growth and coarse face. The diagnosis was confirmed by [c.2715+1G>A(p.Glu906Leufs*4), c.2544del(p.Glu849Lysfs*22)] mutation in targeted gene panel sequencing. In this case, c.2544del is a heterozygote newly identified mutation in mucolipidosis type III and was not found in the control group including the genome aggregation database. And it is interpreted as a pathogenic variant considering the association with phenotype. Here, we report a Korean mucolipidosis type III patients with novel mutations in GNPTAB gene who have been treated since early childhood. Owing to recent development of molecular genetic techniques, it was possible to make early diagnosis and treatment with pamidronate was initiated appropriately in case 1. In addition to these supportive therapies, efforts must be made to develop fundamental treatment for patients with early diagnosis of mucolipidosis.

• Korean Journal of Occupational Therapy
• /
• 제26권4호
• /
• pp.57-72
• /
• 2018

Objective : This study aims to identify the self-reported driving abilities of elderly drivers and their correlations to the demographic factors that influence them, and to verify the adequacy of the hypothetical model, constructed based on vision, auditory, cognition, motor, and psychological factors, in order to present a path model on the self-reported driving abilities of elderly drivers. Methods : The participants in this study were 122 elderly drivers aged 65 years or older residing in the community. This study evaluated the following factors of the participants: Vision and hearing, motor ability, cognitive ability, depression, self-reported driving abilities. Results : The results of this study are as follows. In the case of men, the self-reported driving ability score was higher than for women, and those driving 6-7 days per week had higher scores than those driving 3 days or less. The period of holding a driver's license and driving experience positively correlated with self-reported driving abilities. The final model of factors influencing the self-reported driving abilities of elderly drivers had a p value (.911) exceeding .05; TLI (1.202), NFI (.949), and CFI (1.000) of over .90; and RMSEA (.000) of lower than 0.1, indicating that the hypothesis model fit the data well. First, the directly influential factors on the self-reported driving abilities of elderly drivers were depression, decreased hearing, and grip strength. Second, age was found to have a direct influence on depression and grip strength; moreover, depression and grip strength as a mediator indirectly influenced their self-reported driving abilities. Third, depression was found to have a direct influence on their delayed cognitive processing and grip strength. Conclusion : The significance of this study is in the identification of direct and indirect factors influencing the self-reported driving abilities of elderly drivers in regional communities, and in the verification of multi-dimensional effects of diverse factors influencing such abilities.

• Journal of the Korean Society of International Agriculture
• /
• 제30권4호
• /
• pp.370-375
• /
• 2018

In order to promote the mechanized cultivation of perilla for seed, which has been increasing in cultivation area and production recently as demand increases according to the health-functional effects, we carried out this experiment to determine the optimum sowing time of perilla to minimize the seed loss at harvest and increase the yield. We used two different types of perilla varieties, 'Sodam(small-branch)' and 'Deulsaem(multi-branch)', and the sowing time was June 15, June 30, July 15 and August 1. As the sowing time is late, days of growth from sowing to flowering were shortened, and they were shortened from 14, 26 and 31~32 days on June 30, July 15 and August 1 as compared with June 15, respectively. And, the stem length and culm diameter were shortened or tapered and the number of nodes tended to decrease. The number of effective branch was 82%, 61% and 56% on June 30, July 15 and August 1 as compared with June 15, respectively. Accordingly, it seems to make against in securing the yield from July 15. And, the lowest cluster height was generally shorter as the sowing time is late, and the height was below 15cm on July 15 and August 1. It seems that this may work against the machine harvest. There was a high degree of significance between the sowing time and the yield. Although, the total yield was not statistically significant among June 15, June 30 and July 15, the ratio of shattering seed at harvest was in order of July 15, August 1(30.3%)> June 15(15.3%)> June 30(13.5%). Therefore, the net yield except for shattered seed was higher in order of June 30${\geq}$ June 15> July 15> August 1. This tendency was characteristic regardless of variety and sowing method. And, the protein content in perilla seed increased as the sowing time was delayed, and the content was the highest on August 1. The content of crude fat was relatively high on June 15 and July 15 in 'Sodam', and June 30 and July 15 in 'Deulsaem', respectively. And, the content of linolenic acid was found to be the highest on August 1. As a result, the optimal sowing time for machine harvest of perilla for seed is about June 30. At this time, it is determined that the sowing time is the most suitable to be advantageous in increasing the yield of perilla seed, while minimizing the seed loss due to the shattering at harvest.

• Korean Journal of Organic Agriculture
• /
• 제27권1호
• /
• pp.33-44
• /
• 2019

This study was initiated to find possibility of substitute of gibberellin acid and to prevent negative girdling effect such as slow growth of 'Niitaka' (Pyrus pyrifolia Nakai) trees, a major pear cultivar, at harvest and at 60-, 90-, and 120-d after storage. Seasonal wiring with 3.0-mm-diameter were applied on the main branch at 70, 80, 90, 110, and 130 days after full bloom (DAF) to compare the fruit quality and storability. Fruit weight and sugar contents were the greatly increased by the wiring treatment at 110 DAF, with the lowest values observed for the wiring at 70 DAF. All the wiring treatments reduced fruit acidity but did not affect fruit firmness. a-value on fruit skin was the highest for wiring at 110 DAF and 130 DAF, advancing fruit ripening. The lowest fruit weight loss was occurred at wiring at 110 DAF. a-value on fruit skin was the highest for wiring at 90 DAF and 110 DAF. Wiring at 80 DAF the most increased floral bud diameter, resulting in the lowest L:D ratio of 1.74 observed. As for the mineral nutrients concentrations of floral buds, the concentration of K (0.63%) and Mg (0.31%) were the highest after 80 DAF wiring treatment, whereas Ca and P concentrations did not differ among treatment plots. The leaf K concentrations was the highest in the 130-day wiring treatment (0.76%) and in the control plot (0.78%), whereas there was no significant difference in the concentrations of either Ca or P among treatment plots. Short periods of wiring increased foliar Mg concentrations. In floral buds, carbohydrates showed a tendency for accumulating at a lower concentrations (7.75%) after 70 DAF wiring treatment, which was a relatively short treatment period. On the other hand, the carbohydrate concentrations in leaves showed a tendency for accumulating at lower concentrations after 130 DAF wiring treatment (2.51%), which is a long treatment period, and in the control plot (2.43%). Wiring increased the size and sugar content of fruits, and influenced fruit storability. For the wiring treatment period was delayed, the carbohydrate concentration in flower buds showed curvilinear correlation and the negative correlation with the carbohydrate in leaf tissue.

• Korean Journal of Environmental Agriculture
• /
• 제38권3호
• /
• pp.166-172
• /
• 2019

BACKGROUND: Increase in the ratio of small berries in blueberry production decreases the farmers' profits due to weakening market competitiveness and lowering harvest efficiency. One of the reasons for increased small berries is over fruit-load. For improving productivity and competitiveness of blueberry in Korea, hand-thinning can be applied to increase fruit quality before the developing adequate chemical thinning methods. This study was conducted to investigate the proper timing and methods for floral buds thinning in rabbiteye blueberry. METHODS AND RESULTS: Eight years old bushes of rabbiteye bluberries 'Brightwell' as a primary cultivar and 'Powderblue' as a pollinizer were used for this study. Fruit size distribution by leaf-to-fruit ratio was investigated by counting the number of leaves and fruits in canes of 127 'Brightwell' plants whose fruit set varied. Fifty percent of flowers/floral buds were removed in four different floral buds stages such as bud swell, late pink bud, full bloom, and petal fall, and the consumed time for thinning and fruit characteristics were recorded to investigate the effect and proper timing of floral buds thinning. Fruit weight and soluble solids content tended to increase in proportion to leaf-to-fruit ratio and the production of the number of fruits less than 13 mm in diameter decreased when leaf-to-fruit ratio was more than 2.5. Manual floral buds thinning by hands was fastest in full bloom stage and slowest in bud swelling stage. In all cultivars, fruit size was significantly smaller in non-thinning treatment than thinning, and there was, however, no significant difference in total fruit yield. The number of fruits less than 13 mm in diameter increased in both cultivars as floral buds thinning was delayed. Consumed time for picking 90% berries out of total berries per bush was shortest in full bloom stage thinning in 'Brightwell' and bud swelling, full bloom thinning in 'Powderblue'. These were 25 and 20 days faster than no thinning, respectively. CONCLUSION: Although the effect of floral buds thinning varied depending on the cultivars, our results confirmed that floral buds thinning was effective for the early intensive harvesting and the increase of the large fruit ratio and the harvesting productivity. Also, in order to increase thinning efficiency, it is recommended to remove the flower buds before the full bloom stage.

• Korean Journal of Environmental Biology
• /
• 제38권4호
• /
• pp.518-527
• /
• 2020

The aim of this study was to define the toxic effects of diuron and irgarol, which are new-antifouling agents, on the fertilization rate and normal embryogenesis rate in the sea urchin, Hemicentrotus pulcherrimus. In addition, the study was intended to confirm the hindrance of development in sea urchins. The fertilization rate of H. pulcherrimus was not decreased by the tested concentrations. However, the normal embryogenesis rate was decreased in a concentration-dependent manner. The 50% effective concentrations (EC₅₀) of normal embryogenesis rate were 7.12 mg L^-1 and 2.31 mg L^-1, respectively. As the embryos developed into pluteus larvae, after 18 h of exposure to diuron and irgarol at EC₅₀, development of the early gastrula stage was delayed, and significant developmental delays were observed after 24 h. After this, continuous developmental delays were observed in the process leading to the early gastrular, gastrular, early pluteus, and pluteus stages. Therefore, the toxic effects of diuron and irgarol on sea urchins were attributed to the delay in the developmental processes in the early life stages. Diuron and irgarol are highly persistent in the environment and have known-well toxic effects on various marine organisms including invertebrates, as shown in this study. Therefore, it is urgent to establish an environmental protection strategy to prevent the pollution of and preserve the marine environment.

• Journal of Intelligence and Information Systems
• /
• 제27권1호
• /
• pp.177-190
• /
• 2021

Due to the development of the fourth industrial revolution technology, efforts are being made to improve areas that humans cannot handle by utilizing artificial intelligence techniques such as machine learning. Although on-demand production companies also want to reduce corporate risks such as delays in delivery by predicting total production time for orders, they are having difficulty predicting this because the total production time is all different for each order. The Theory of Constraints (TOC) theory was developed to find the least efficient areas to increase order throughput and reduce order total cost, but failed to provide a forecast of total production time. Order production varies from order to order due to various customer needs, so the total production time of individual orders can be measured postmortem, but it is difficult to predict in advance. The total measured production time of existing orders is also different, which has limitations that cannot be used as standard time. As a result, experienced managers rely on persimmons rather than on the use of the system, while inexperienced managers use simple management indicators (e.g., 60 days total production time for raw materials, 90 days total production time for steel plates, etc.). Too fast work instructions based on imperfections or indicators cause congestion, which leads to productivity degradation, and too late leads to increased production costs or failure to meet delivery dates due to emergency processing. Failure to meet the deadline will result in compensation for delayed compensation or adversely affect business and collection sectors. In this study, to address these problems, an entity that operates an order production system seeks to find a machine learning model that estimates the total production time of new orders. It uses orders, production, and process performance for materials used for machine learning. We compared and analyzed OLS, GLM Gamma, Extra Trees, and Random Forest algorithms as the best algorithms for estimating total production time and present the results.