• International Journal of Highway Engineering
• /
• v.15 no.5
• /
• pp.217-226
• /
• 2013

PURPOSES : Under the capacity conditions with balanced approach flows, roundabouts give less delay than existing signalized intersections; however, flows over 450 vehicles/hour/lane with unbalanced approach flow conditions, roundabouts efficiency drops due to the short time difference between the critical gap and the follow-up headway. The purpose of this study is developing a roundabout Signal Metering operation method by considering approach lanes degree of saturation. METHODS : A four-way-approach with one-lane roundabout is selected to compare the Signal Metering performance for the case of 16 different unbalanced flow conditions. Based on these traffic conditions, the performance is evaluated for 64 different cases of Signal Metering combinations by using SIDRA software. A degree of saturation(V/C ratio) sum for two adjoined approaches is used for the performance index of choosing Metered Approach and Controlling Approach. RESULTS : When the V/C ratio sum is 0.29~0.81 and Metered Approach flow is less than Controlling Approach flow, the average delay saving per vehicle is about 7 seconds; however, after this rage the delay saving decreases gradually until the V/C ratio sum reaches around 1.0. The range of V/C ratio sum 0.93~1.09 provides average delay saving per vehicle about 3 seconds. In case of V/C ratio sum is grater than 1.0 and the flows of Metered Approach is grater than Controlling Approach, the average delay per vehicle increases 3~11 times respectively. CONCLUSIONS : As expected, the Signal Metering provides substantial improvements in delay saving for the case of V/C ratio sum is 0.3~1.0 under the traffic flow conditions of Metered Approach is less than Controlling Approach.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.124-129
• /
• 2009

Although the maximum sum-rate capacity of multiple-input multiple output(MIMO) broadcast channels(BCs) can be achieved by dirty-paper coding(DPC), the results were obtained without fairness considerations in uncorrelated MIMO channels. In this paper, we propose new multiuser scheduling algorithms, which find a best user set for approaching the maximum sum-rate capacity while maintaining fairness among users. We analyze the performance of the proposed algorithms using zero-forcing dirty paper coding(ZF-DPC) in the correlated MIMO BCs for throughput and delay fairness, respectively. Numerical results demonstrate that a large time window can reduce the average throughput difference between users, but it increases head-of-line(HOL) delay jitters in the case of delay fairness.

• Kyungpook Mathematical Journal
• /
• v.47 no.1
• /
• pp.1-20
• /
• 2007

In this paper, oscillation and nonoscillation criteria are established for nonlinear neutral delay differential equations with several positive and negative coefficients $$[x(t)-R(t)x(t-r)]^{\prime}+\sum_{i=1}^{m}Pi(t)H_i(x(t-{\tau}_i))-\sum_{j=1}^{n}Q_j(t)H_j(x(t-{\sigma}_j))=0$$. Our criteria improve and extend many results known in the literature. In addition we prove that under appropriate hypotheses, if every solution of the associated linear equation with constant coefficients, $$y^{\prime}(t)+\sum_{i=1}^{m}(p_i-\sum_{k{\in}J_i}qk)y(t-{\tau}_i)=0$$, oscillates, then every solution of the nonlinear equation also oscillates.

• Journal of the Korean Institute of Gas
• /
• v.15 no.3
• /
• pp.11-18
• /
• 2011

Ultrasonic guided waves have been widely utilized for long range inspection of structures. Recently, many researchers have paid attention to the tomographic imaging using guided wave for the diagnosis of plate-like structures because group velocity of guided waves is changed by central frequency of transducer and thickness of plate. Currently, Delay and Sum imaging technique and MVDR(Minimum Variance Distortionless Response) imaging technique are performed. So the performance of these two imaging techniques are investigated in this paper.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.4
• /
• pp.279-284
• /
• 2017

The localization of sources has a numerous number of applications. To estimate the position of sources, the relative time delay between two or more received signals for the direct signal must be determined. Although the GCC (Generalized Cross-Correlation) method is the most popular technique, an approach based on CCA (Canonical Correlation Analysis) was also proposed for the TDE (Time Delay Estimation). In this paper, we propose a new adaptive algorithm based on CCA in order to utilized the sparsity in the eigenvector of CCA based time delay estimator. The proposed algorithm uses the eigenvector corresponding to the maximum eigenvalue with log-sum regularization in order to utilize the sparsity in the eigenvector. We have performed simulations for several SNR(signal to noise ratio)s, showing that the new CCA based algorithm can estimate the time delays more accurately than the conventional CCA and GCC based TDE algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.811-816
• /
• 2019

This paper first proposes a technique to separate clean speech signals and mixed noise signals by using an independent vector analysis algorithm of frequency band for 4 channel speech source signals with a noise. An improved output speech signal from the proposed independent vector analysis algorithm is obtained by using the cross-correlation between the signal outputs from the frequency domain delay-sum beamforming and the output signals separated from the proposed independent vector analysis algorithm. In the experiments, the proposed algorithm improves the maximum SNRs of 10.90dB and the segmental SNRs of 10.02dB compared with the frequency domain delay-sum beamforming algorithm for the input mixed noise speeches with 0dB and -5dB SNRs including white noise, respectively. Therefore, it can be seen from this experiment and consideration that the speech quality of this proposed algorithm is improved compared to the frequency domain delay-sum beamforming algorithm.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.2
• /
• pp.140-146
• /
• 2002

We consider a class of large-scale interconnected time delay systems and investigate a decentralized robust passive control problem. sufficient conditions for unforced interconnected uncertain systems with time delay to be robustly stable with extended strictly passivity is given in terms of algebraic Riccati inequality and linear matrix inequality. The decentralized robust passive control problem for norm-bounded and positive real uncertainty is shown to be converted to extended strictly positive real control problem for a modified system which contains neither time delay nor uncertainty.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.359-369
• /
• 2005

Delay estimation is a difficult Problem in computer networks. Accurate one-way delay estimation is crucial because it serves a very important role in network performance and thus application design. RTT(Round Trip Time) is often used as an approximation of the delay, but because it is a sum of the forward and reverse delays, the actual one-way delay cannot be estimated accurately from RTT. To estimate one-way delay accurately, this paper proposes a new scheme that analytically derives one-way delay, forward and reverse delay respectively. We show that the performance of TCP can improve dramatically in asymmetric networks using our scheme. A key contribution of this paper is that our one-way deiay estimation is much more accurate than RTT estimation so that TCP can quickly find the network capacity in the slow start phase. Since RTT is the sum of the forward and reverse delays, our scheme can be applied to any protocol that is based on RTT.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.520-529
• /
• 2007

Apportioning responsibilities of concurrent delay to the owner and the contractor is a difficult task, due to the sophisticate nature both in the schedule and in the factors that cause the delay. This research attempts to develop a simplified yet systematic approach that can be used for a fair apportionment of concurrent delay. A concurrent delay is defined herein as when the contractor and the owner have both caused independent critical path delays during the same approximate time period. Incorporating the concepts of windows analysis and critical path method (CPM), the developed approach has three "windowing of delay" steps to quickly apportion the delay in each of these windows, and a fourth step to sum up those apportioned delays to obtain each party's final responsibilities. This developed approach is found to be simple and effective at this stage; it will be tested against real cases in the near future.