• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.116-123
• /
• 2008

In this paper we study the performance of the measurement time-delay estimation of tightly-coupled GPS/INS(Global positioning system/Inertial Navigation system) system. Generally, the heading error estimation performance of loosely-coupled GPS/INS system using GPS's Navigation Solution is poor. In the case of tightly-coupled GPS/INS system using pseudo-range and pseudo-range rate, the heading error estimation performance is better. However, the time-delay error on the measurement(pseudo-range rate) make the heading error estimation performance degraded. So that, we propose the time-delay model on the measurement and compose the time-delay estimator. And we confirm that the heading error estimation performance in the case of measurement time-delay existence is similar with the case of no-delay by Monte-Carlo simulation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_2
• /
• pp.673-680
• /
• 2012

Long-term GPS data analysis was performed in order to analyze the seasonal variation of tropospheric delay and the success rate of the ambiguity resolution. For this analysis, a total of 57 stations including 10 IGS stations in East Asia were processed together with double-differenced observables using Bernese GPS Software V5.0. The time span for this study ranges from 2002.0 to 2012.5 (10.5 years). The average baseline length is 339.0 km and the maximum reaches up to 2,000 km. The analysis is focused on two things: the annual variation of the tropospheric delay and the ambiguity resolution rate. The tropospheric delay is closely related to the weather condition, especially relative humidity, therefore it was estimated that the maximum would be in summer, while reaching its minimum in winter with the apparent seasonal variations. On the contrary, however, the success rate of the ambiguity resolution shows the opposite pattern: its maximum was in winter and minimum in summer. The fact seems to be induced by the surrounding conditions; that is, the trees thick with leaves near the GPS antenna interfere with GPS signals in summer. This seems to confirm partly that there is a distinct trend in the decreasing success rate since 2006 because the trees are growing every year. It is necessary to eliminate the factors that degrade the GPS quality and the tropospheric modeling for Korea needs to be studied further.

• Journal of Advanced Navigation Technology
• /
• v.15 no.3
• /
• pp.355-363
• /
• 2011

Transcoding in the wireless mobile network is an important mechanism that reduces the delay time and improves the stream processing capacity. Wireless mobile streaming media services, however, have such problems as congestion, interference and delay due to narrow network bandwidth and limited resources. These problems degrade not only Quality of Service (QoS) but also responsiveness of the streaming media service. To solve this problem, this paper proposes a object version transcoding method. The proposed method analyzes the object versions to construct the transcoding graph. This paper utilizes a reference rate-based control function for an efficient streaming, and measures MVDS(Multiple Version Delay Saving) for an efficient delay savings. The simulation results show that the proposed mechanism achieves improved performance in delay rate and cache hit rate compared with those of other existing methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.76-86
• /
• 1994

Combustion of diesel engine depends on the mixing of air and evaporating fuel during ignition delay greatly. Variation of air-fuel mixing rate and ignition delay for engine operating condition causes difference of combustion, performance and exhaust emissions. This study is investigated in a turbocharged diesel engine of IDI swirl chamber type. In the results, As injection timing is advanced until $12.6^{\circ}$ BTC, ignition delay decreases. NOx concentration and smoke level in exhaust gas increases for advanced injection timing Ignition delay, combustion period, pressure rise rate and exhaust gas temperature are increased with increasing engine speed. And ignition delay at high load is more decreased than that at low load. Ignition delay and combustion period are decreased with increasing intake pressure. Power increases, temperature and CO, NOx concentration in exhaust gas decreases as intake pressure increases. With increasing load, ignition delay is decreased and combustion period, motoring pressure are increased.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2006

In this paper, an in-process diagnosis method for performance of position control servo system was studied, which was based upon null bias, slew-rate ratio and delay time measurement. Slew-rate ratio and delay time were analyzed by theoretical analysis, computer simulation and experiment. As a result of these analysis, when spool of servovalve was weared, slew-rate ratio was decreased and delay time was increased.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.251-255
• /
• 2009

Network coding is a promising technology that increases the system throughput via reducing the number of transmission for a packet delivered from the source node to the destination node. Nevertheless, it suffers from the metrics of end-to-end delay. Network Coding scheme takes more processing delay which occurs as coding node encodes (XOR) a certain number of packets that relayed by the coding node, and more queuing delay which occurs as a packet waits for other packets to be encoded with. Therefore, in this paper, we analyze the dependency of the queuing delay to the arrival rate of each packet. In addition, we analyze and compare the delay in DCF without XOR and DCF with XOR under dynamic traffic.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.54-67
• /
• 2013

The main purpose of this study is to analyze the diversion rate by the levels of delay and the types of display. For this study, we developed the logit model by analyzing the result of SP survey of drivers who have driver's licence after manipulating a virtual driving simulator. The result of analysis was that the types of display was not statistically significant to the diversion rate. On the other hand, the levels of delay was very meaningful factor with the diversion rate. When the main road was flowing smoothly, drivers started to detour at the levels of delay 125% under the traffic free flow state. Similarly, when the levels of delay got worse, the diversion rate kept the same percentage as it was at the levels of delay 125% state which represented a smooth road condition. Likewise, when the main road's traffic flow was slow, drivers appeared to make detours at the same state of the levels of delay 125%. It was found that as the levels of delay got worse, the diversion rose higher than the diversion rate at the condition of slow traffic flow situation with the levels of delay 125%. The result of this study suggests the criterion of drivers detour point. For the conclusion, the result of study would be a reasonable reference for establishing transportation strategies by reflecting drivers' detouring property and would improve the efficiency of traffic flow.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.1-11
• /
• 1993

An experimental study was carried out to evaluate the characteristics of transient performance of carburettered gasoline engine under rapid accelerating transient driving conditions. In order to evaluate the characteristics of transient performance quantitatively, the concept of dead time $t_d$ response delay time $t_r$ are introduced. Performance parameters such as air mass fiowrate Gat, engine speed N, manifold boost pressure Pb, and output torque T are measured simultaneously during the rapid opening of the throttle valve by the stepping motor. During the rapid opening of the throttle valve, air mass fiowrate Gat is increased immediately without delay time, but response of engine revolution N, and output torque T are delayed. Therefore hesitation, and stumble phenomena are occurred. Dead time $t_d$ and response delay time $t_r$ of engine revolution N, which is extremely delayed comparing to other performance parameters, are respectively 0.2-0.3sec., 3.0-4.6sec., and dead time rate $t_d/{\Delta}t$ and response delay time rate $t_r/{\Delta}t$ are linearly increased with the throttle valve opening rate ${\theta}$ during the acceleration from 12 degree to 20 degree at 1250rpm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.829-837
• /
• 2006

Due to the internet network congestion, packets may be dropped or delayed at routers. This phenomenon degrades the quality of streaming applications that require high QoS requirements. The proposed algorithm in this paper, called DBRC(Delay-Based Rate Control), tries to cause router queue occupancy to reach a steady state or equilibrium by throttling the transmission rate of the multimedia traffics when network delays tend to increase and also probing for more bandwidth when network delays tend to decrease. Simulation results show that the proposed algorithm provides smooth transmission rate, nearly constant delay and low packet loss rates, compared with TFRC(TCP Friendly Rate Control) that is one of dominant multimedia congestion control algorithms.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.10
• /
• pp.678-689
• /
• 2004

The major concern of networked control system is network uncertainties such as time delay and data loss. Because these uncertainties may degrade the performance of networked control system and destabilize the entire system. Therefore, the performance and the stability variation of networked control system due to network uncertainties must be considered first in designing networked control system. In particular, the stability analysis of networked control system is most important issue since time delay and data loss can make the overall systems unstable. In this paper, we present a new stability analysis method of networked control system with time delay and data loss, which is impossible in previous works. The proposed method can determine maximum time delay and allowable transmission rate that preserve stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.