• Title/Summary/Keyword: Delay effects

검색결과 1,065건 처리시간 0.036초

양자화와 오버플로우 비선형성을 가지는 이산시간 폴리토픽 불확실 지연 시스템의 강인 안정성 (Robust Stability for Discrete-time Polytopic Uncertain Delay Systems with Quantization/overflow Nonlinearities)

  • 김종해
    • 전기학회논문지
    • /
    • 제61권12호
    • /
    • pp.1898-1902
    • /
    • 2012
  • In this paper, we consider the delay-dependent robust stability condition for polytopic uncertain systems with interval time-varying delay using various combinations of quantization and overflow nonlinearities. A robust stability condition for uncertain systems with time-varying delay and quantization/overflow nonlinearities is proposed by LMI(linear matrix inequality) and Lyapunov technique. It is shown that the proposed method is less conservative compared to the recent results by numerical examples.

모듈형 멀티레벨 전압형 HVDC 시스템을 위한 시간 지연을 고려한 디지털 제어기의 설계 (A Design Methodology of Digital Controller Considering Time Delay Effect for a Modular Multilevel Converter VSC HVDC System)

  • 송지완;구남준;김래영
    • 전력전자학회논문지
    • /
    • 제21권1호
    • /
    • pp.49-57
    • /
    • 2016
  • A modular multilevel converter is widely adapted for a high-voltage direct current power transmission system. This study proposes a design methodology for a novel digital control that mitigates the negative effects caused by time delay, including communication transport delay for a modular multilevel converter. The modeling and negative effect of time delay are analyzed theoretically in a frequency domain, and its compensation methodology based on an inverse model is described fully with practical considerations. The proposed methodology is verified through several simulation results using a modular 21-level converter system.

지연시간을 갖는 프로세스를 위한 슬라이딩모드 가변구조 제어기 (Sliding Mode Controller for Process with Time Delay)

  • 김석진;박귀태;이기상;송명현;김성호
    • 대한전기학회논문지
    • /
    • 제43권7호
    • /
    • pp.1158-1168
    • /
    • 1994
  • A variable structure control scheme(VSCS) with sliding mode that can be applied to the process with input/output(I/O) delay is proposed and its control performances is evaluated. The proposed VSCS with and output feedback scheme comprises a variable structure controller, a servo dynamic for tracking the set-poing, and a Smith predictor for compensating the effects of time delay. The robustness against the parameter variations and external disturbances can be achieved by the proposed VSCS even when the controlled process includes I/O delay. And the desired transient response is obtained by simple adjustment of the coefficients of the switching surface equation.

  • PDF

서울메트로 2호선에서 승객폭주 영향에 대한 연구 (A Study of Overcrowding Effects on Seoul Metro Line 2)

  • 곽윤봉;이종우;김두겸;고영환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.1960-1965
    • /
    • 2011
  • Train operations run trains to well-scheduled time table and the ideal case would be to have the trains running exactly as scheduled. The train delay resulted from the overcrowding takes place frequently in Seoul metro line 2, and doesn't keep the predefined headway. It requires to analyze the train delay caused from the overcrowding. In this paper we modeled, simulated, and analyzed the delay to disclose the effects in the line 2 operation. The modeling consists of trains entering into the line, running on the line and exiting from the line. The simulation carries out with statistical perturbation and analyzes the disturbance.

  • PDF

충격파관을 이용한 분무연료의 착화지연에 관한 연구 (A study on ignition delays of sprays using a shock tube)

  • 정진도;류정인;수곡행부
    • 오토저널
    • /
    • 제11권6호
    • /
    • pp.48-56
    • /
    • 1989
  • A shock tube technique was developed in which a freely falling droplets column produced by an ultrasonic atomizer was ignited behind reflected shock. In the present study, the effects of turbulent mixing on the ignition delay of a cetane was decided, also, ignition process was investigated. For the purpose of disturbance of droplets column and mixing, authors installed turbulent lattice in shock tube. Usually, the ignition delay is so called Arrhenius plot which found break point in the Arrhenius plot on the high temperature side. The rate of misfiring increased rapidly below 1080K, but ignition took place from 838k and luminous flame was seen to spread over the whole section by turbulent lattice. Length, from end plate to turbulent lattice, was varied with 60,40,20mm. Also, ignition process was detected by Photo transistor. As a result, it was found that physical factors changed ignition delay greatly and turbulent mixing had a considerable effects in the ignition process.

  • PDF

승용 디젤엔진의 EGR과 Induction위치에 따른 소음 영향 (The Effects of EGR and EGR Induction Point on Combustion Noise of a Passenger Diesel Vehicle)

  • 강상규;김재헌;백성남;강구태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 추계학술대회논문집
    • /
    • pp.393-396
    • /
    • 2007
  • EGR is well established and efficient means to reduce NOx emissions. The increase of EGR rate affects the ignition delay of the combustion due to the lower oxygen availability. The increasing of the ignition delay period causes large combustion noise. In this study, the effects of EGR and Induction Point on combustion noise are investigated by measuring cylinder pressure and noise. As a result, The Combustion noise is markedly increased under the application of EGR. The increased premixed distance by displacing EGR Induction point in flow direction causes the uniform EGR distribution and the modulation level of the combustion noise is reduced slightly.

  • PDF

교차로 유형별 대각선횡단보도 설치효과 분석 (차량소통측면) (Analysis of the Effects of Scrambled Crosswalk Installation Depending on the Types of Intersections Using VISSIM)

  • 정도영;이동민;전진우;한대철
    • 한국도로학회논문집
    • /
    • 제19권3호
    • /
    • pp.71-81
    • /
    • 2017
  • PURPOSES : In this study, the effects of installation of diagonal crosswalks on traffic flow depending on the types of intersections are analyzed. METHODS : Scrambled crosswalks have advantages in the traffic safety. Therefore, a comparative analysis of the overall average delay before and after installation of the scrambled crosswalk was conducted using VISSIM. RESULTS : The overall average delay for the scrambled crosswalk decreased when the traffic volume ratio of the major to the minor street is 1: 6 in 2-by-1 and 3-by-1 types of intersections. The scrambled crosswalk improved efficiency of traffic operation in intersections: higher traffic volume for a major street, lower traffic volume for a minor street, and longer cross-distance for a major street. CONCLUSIONS:This study can be used to determine when a scrambled crosswalk should be installed to improve operational efficiency.

저전력 CMOS 회로를 위한 V$_{GS}-V_{TH}$ 스케일링 (V$_{GS}-V_{TH}$ scaling for low power CMOS circuit)

  • 강대관;박영준;민홍식
    • 전자공학회논문지A
    • /
    • 제33A권3호
    • /
    • pp.82-88
    • /
    • 1996
  • A simpel formular is proposed for the analysis of gate delay of CMOS gate in the low V$_{GS}-V_{TH}$ scaling. The effects of magnitude of V$_{GS}-V_{TH}$ on gate delay can be readily found through the formula so that it can be used ot design the device parameters in the low V$_{DD}$ CMOS circuits. The measured sresutls confirm the usability of the proposed formula and quantifies the improtance of V$_{TH}$ effects on gate delay under low voltae operation. Applying the formula to the prototype NMOSFET devices representing the five generations of technology, the impacts of the V$_{GS}-V_{TH}$ on the various aspects of the circuit and device characteristics are investigated in a consistent manner.

  • PDF