• 대한전자공학회논문지TC
• /
• 제46권9호
• /
• pp.60-65
• /
• 2009

본 논문에서는 대역통과 여파기와 대역저지 여파기를 하나의 구조로 합성하여 크기 증가 없이 초광대역 특성을 가지면서 Wireless-LAN 대역을 저지하는 대역통과 여파기를 설계, 구현하였다. 대역저지 특성을 얻으면서도 여파기의 크기증가가 없어야 하기 때문에 전송선에 내장된 형태의 오픈 스터브를 사용하였다. 그리고 저역 통과 특성을 얻기 위하여 접지 면에 식각할 수 있는 DGS(Defected Ground Structure) 구조를 이용하였다. 기존의 대역통과 여파기와 저역통과 여파기를 직접 연결하였을 때 보다 크기를 줄일 수 있었다. 측정결과 통과대역은 $2.21GHz{\sim}10.92GHz$ 이고 삽입손실은 최대 0.7dB, 반사손실은 최소 17dB, 군 지연 변화폭은 0.22ns였으며 $5.3GHz{\sim}5.7GHz$의 저지대역을 형성하였다.

• 한국ITS학회 논문지
• /
• 제17권4호
• /
• pp.168-180
• /
• 2018

모바일 디바이스의 보급과 고품질 서비스의 등장으로 모바일 트래픽이 급격히 증가하여, 셀룰러 네트워크의 과부하가 예상된다. 부하를 줄이고 5세대로 진화하기 위한 방안으로는 D2D 통신이 있다. D2D 통신은 단말 간에 직접 통신하기 때문에 셀룰러 네트워크의 과부하를 줄여, 에너지 효율, 데이터 전송률 그리고 네트워크 성능을 향상시킬 수 있다. 본 논문은 셀룰러 네트워크에서 D2D 통신을 위한 D2D 핸드오버 방안을 제안한다. 셀룰러 네트워크는 3GPP EPS이며, 제안하는 D2D 핸드오버 방안은 기존 EPS와 D2D 통신의 호환성을 고려하여 기존 EPS 핸드오버 과정을 개선하였다. 또한 네트워크 시뮬레이터인 ns-3를 사용하여 제안하는 핸드오버 방안의 우수성을 입증하였다. 시뮬레이션 결과는 제안한 핸드오버 방안이 기존 핸드오버 방식에 비해 CUE 변화량, 패킷 전달 지연 시간 그리고 처리량 측면에서 우수하다는 것을 입증하였다.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.83-89
• /
• 2000

In hydraulic control system turbine and gear motor type flowmeters are widely used to measure the flow rate under steady flow conditions. With the recent growth of interest in the measurement of instantaneous values of unsteady flow rate the test of the transient response of these flowmeters are in some significance. however an unsteady flow rate mea-surment and its calibration method with a fast response and a high accuracy have not beendeveloped. In this research particularly the dynamic characteristics of turbine and gear motor type flowmeters are investigated experimentally and simple mathematical models are proposed. The measured flow rate waveforms are compared with those by remote instan-taneous flow rate measurement method(RIFM) which has been developed by author and used for calibration As the result of frequency response test gain and phase between the measured flow rate waveforms by turbine type flowmeter and those estimated by RIFM are in good agreement up to 70Hz For the gear motor type flowmeter th simulated results by a math-ematical model proposed here agree well with the experiment nearly up to 100Hz. Also it if sound that the pressure drop across the flowmeter is increased in proportion to the frequency of the flow rate variation in a high frequency region of more than 100Hz. It can be explained that the dealy of gear motor type flowmeter in high frequency regionis mainly attributed to a first order delay consisting of the inertia of gears and internal leakage of the gear motor.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.557-566
• /
• 2019

The evaluation of the seismic hazard for a given site is to estimate the seismic ground motion at the surface. This is the result of the combination of the action of the seismic source, which generates seismic waves, the propagation of these waves between the source and the site, and site local conditions. The aim of this work is to evaluate the sensitivity of dynamic response of extended structures to spatial variable ground motions (SVGM). All factors of spatial variability of ground motion are considered, especially local site effect. In this paper, a method is presented to simulate spatially varying earthquake ground motions. The scheme for generating spatially varying ground motions is established for spatial locations on the ground surface with varying site conditions. In this proposed method, two steps are necessary. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function. An empirical coherency loss model is used to define spatial variable seismic ground motions at the base rock. In the second step, power spectral density function of ground motion on surface is derived by considering site amplification effect based on the one dimensional seismic wave propagation theory. Several dynamics analysis of a curved viaduct to various cases of spatially varying seismic ground motions are performed. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effect, to spatial ground motions with considering coherency loss, phase delay and local site effects are also calculated. The results showed that the generated seismic signals are strongly conditioned by the local site effect. In the same sense, the dynamic response of the viaduct is very sensitive of the variation of local geological conditions of the site. The effect of neglecting local site effect in dynamic analysis gives rise to a significant underestimation of the seismic demand of the structure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.67-75
• /
• 2007

To improve low sense margin at low voltage, we propose a negatively driven sensing (NDS) scheme and to solve the problem of WL-to-BL short leakage fail, a variable bitline reference scheme with free-level precharged bitline (FLPB) scheme is adopted. The influence of the threshold voltage offset of NMOS and PMOS transistors in a latch type sense amplifier is very important factor these days. From evaluating the sense amplifier offset voltage distribution of NMOS and PMOS, it is well known that PMOS has larger distribution in threshold voltage variation than that of NMOS. The negatively-driven sensing (NDS) scheme enhances the NMOS amplifying ability. The offset voltage distribution is overcome by NMOS activation with NDS scheme first and PMOS activation followed by time delay. The sense amplifier takes a negative voltage during the sensing and amplifying period. The negative voltage of NDS scheme is about -0.3V to -0.6V. The performance of the NDS scheme for DRAM at the gigabit level has been verified through its realization on 1-Gb DDR2 DRAM chip.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.382-387
• /
• 2014

An all-reflective, simple noncollinear second harmonic (SH) autocorrelator is described for monitoring the shot-to-shot behavior of ultrashort high-power laser pulses. Two mirrors are used for the dispersion-free splitting of a pulse into two halves. One of the mirrors is able to adjust the delay time and angle between two halves of the laser pulse in a nonlinear crystal. We present the possibility of real-time measurement of the pulse duration, peak intensity (or energy), and the pointing jitters of a laser pulse, by analyzing the spatial profile of the SH autocorrelation signal measured by a CCD camera. The measurement of the shot-to-shot variation of those parameters will be important for the detailed characterization of laser accelerated electrons or protons.

• 대한전자공학회논문지TC
• /
• 제38권11호
• /
• pp.30-40
• /
• 2001

본 논문은 무선 ATM 망에서 VBR 서비스의 가변적인 슬롯 요구량을 신속하고 정확하게 반영함으로써 무선 구간에서의 전송 효율을 최대화할 수 있는 Hybrid DP 제어기법 기반의 동적 슬롯 할당 알고리즘을 제안한다. 제안한 Hybrid DP 제어기법은 기존의 In-band 제어기법과 Out-of-band 제어기법의 장점을 보존하고 단점 및 제어의 한계성을 개선한 방법으로 이동 단말기의 버퍼 상태 변화에 따라 기지국으로 전송되는 ATM 셀에 동적 파라미터 값을 삽입하거나 별도의 제어 채널을 사용하여 단말기의 필요 슬롯 수를 기지국에 전송하는 방식이다. 따라서 VBR 서비스의 유동적인 데이터 발생률을 효율적으로 기지국에게 전송하여 슬롯 할당에 반영함으로써 제한된 무선 채널을 효율적으로 이용하면서 VBR 서비스의 QoS를 보장할 수 있다. 제안한 동적 슬롯 할당 알고리즘의 성능 평가를 위해 해석적 분석 및 시뮬레이션을 실시하였으며, 할당효율, 지연 및 셀 손실률 관점에서 기존의 제어기법보다 우수한 성능을 보였다.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.491-504
• /
• 2018

Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.147-154
• /
• 2014

본 논문에서는 발암물질 저감을 위하여 정수장 염소투입공정 중 전염소 주입에 따른 침전지의 염소 증발량이 주야간, 계절별 현격한 차이가 발생함에 따라 시간대별/계절별/날씨별 유입목표 잔류염소를 변경하고자 운영자의 경험에 기반한 퍼지 모델링 기법을 도입하였다. 퍼지에 의해 설정된 목표 잔류염소농도를 유지하기 위하여 침전지 유입부에 잔류염소 계측기를 추가 설치하여 피드백 Loop 시간을 최소화하였고 지연시간이 긴 시스템에 적용되는 이중 피드백 제어시스템인 캐스케이드 제어를 병행 실시하였다. 이를 통해 소독공정의 고유특성인 시간지연에 대한 선제적 대응 및 침전지 잔류염소농도 변화폭을 7.3배가량 안정화를 시키고 염소소모량을 저감하여 안정적이고 경제적인 물 공급이 가능하도록 하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권1호
• /
• pp.19-25
• /
• 2018

Objective: In practical breeding, selection is often performed by ignoring the accuracy of evaluations and applying economic weights directly to the selection index coefficients of genetically standardized traits. The denominator of the standardized component trait of estimated genetic evaluations in practical selection varies with its reliability. Whereas theoretical methods for calculating the selection index coefficients of genetically standardized traits account for this variation, practical selection ignores reliability and assumes that it is equal to unity for each trait. The purpose of this study was to clarify the effects of ignoring the accuracy of the standardized component trait in selection criteria on selection responses and economic weights in retrospect. Methods: Theoretical methods were presented accounting for reliability of estimated genetic evaluations for the selection index composed of genetically standardized traits. Results: Selection responses and economic weights in retrospect resulting from practical selection were greater than those resulting from theoretical selection accounting for reliability when the accuracy of the estimated breeding value (EBV) or genomically enhanced breeding value (GEBV) was lower than those of the other traits in the index, but the opposite occurred when the accuracy of the EBV or GEBV was greater than those of the other traits. This trend was more conspicuous for traits with low economic weights than for those with high weights. Conclusion: Failure of the practical index to account for reliability yielded economic weights in retrospect that differed from those obtained with the theoretical index. Our results indicated that practical indices that ignore reliability delay genetic improvement. Therefore, selection practices need to account for reliability, especially when the reliabilities of the traits included in the index vary widely.