• 한국전기전자재료학회논문지
• /
• 제22권10호
• /
• pp.801-807
• /
• 2009

In this paper, we propose a novel shoot-through protection circuit and pulse generator for half-bridge driver IC. We designed a robust half-bridge driver IC over a variation of processes and power supplies. The proposed circuit is composed a delay circuit using a beta-multiplier reference. The proposed circuit has a lower variation rate of dead time and pulse-width over variation of processes and supply voltages than the conventional circuit. Especially, the proposed circuit has more excellent pulse-width matching of set and reset signals than the conventional circuit. Also, the proposed pulse generator is prevented from fault operations using a logic gate. Dead time and pulse-width of the proposed circuit are typical 250 ns, respectively. The variation ratio is 68%(170 ns) of maximum over variation of processes and supply voltages. The proposed circuit is designed using $1\;{\mu}m$ 650 V BCD (Bipolar, CMOS, DMOS) process parameter, and the simulations are carried out using Spectre simulator of Cadence corporation.

• 한국정보처리학회논문지
• /
• 제7권9호
• /
• pp.2980-2993
• /
• 2000

B-ISDN 서비스를 신속하게 전개하기 위하여 지상 ATM과 위성망의 결합이 추진되고 있다. 이때 위성 TDMA와 ATM의 전달방식의 차이로 발생되는 셀 지연 변이(CDV)는 셀의 전송 품질을 저하시킨다. 본 논문에서는 기존의 CDV 보상 기법의 단점을 보완하는 부분 타임 스탬프 방식을 제안하였다. 이때 CDV를 최소화하고 위성 채널의 효율을 높이기 위해 부분 타임 스탬프의 최적화 개념을 도입하였다. 제안 기법의 성능을 평가하기 위하여 CDV 분포 폭을 평가 기준으로 하는 모의 실험을 통해 CDV 보상 성능의 우수함을 확인하였다.

• 센서학회지
• /
• 제17권4호
• /
• pp.289-294
• /
• 2008

The purpose of this study is to materialize the viscosity sensor by using the SH-SAW sensor of which the center frequency is operated at higher than 50 MHz. In order to measure the viscosity, SAW sensor of which the center frequency is operated at 100 MHz is developed. By using the developed sensor, phase shift, delay time, insertion loss, and frequency variation are measured at different viscosity. The result shows that the phase shift difference between the viscosity variations is such that the difference between the distilled water and the 100 % glycerol solution is approximately $45^{\circ}$, the change of the insertion loss is approximately 9 dB, and the difference of frequency variation is approximately 5.9 MHz. Therefore, it is shown that viscosity of unknown solution can be measured with the surface acoustic wave sensor.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.275-280
• /
• 2009

Femtocells are viewed as a promising option for mobile operators to improve coverage and provide high-data-rate services in a cost-effective manner Femtocells can be used to serve indoor users, resulting in a powerful solution for ubiquitous indoor and outdoor coverage. TThe frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) forapplications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. The IEEE 1588 specification provides a low-cost means for clock synchronisation over a broadband Internet connection. The Time of Packet (ToP) specified in IEEE 1588 is able to synchronize distributed clocks with an accuracy of less than one microsecond in packet networks. However, the timing synchronization over packet switched networks is a difficult task because packet networks introduce large and highly variable packet delays. This paper proposes an enhanced filter algorithm to reduce ths packet delay variation effects and maintain ToP slave clock synchronization performance. The results are presented to demonstrate in the intra-networks and show the improved performance case when the efficient ToP filter algorithm is applied.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.31-38
• /
• 1995

In this paper, we consider the leaky bucket parameter dimensioning problem in the presence of the cell delay variation(CDV) which arises at the customer premises network dud to the multiplexing with other traffic streams. We consider an ATM multiplexer in which a single CBR stream and several heterogeneous VBR traffic streams are multiplexed. Choosing an MMPP model for the bursty traffic streams, we derive an (MMPP+DD)/D/1/K queueing model for the evaluation of the CDV experienced by the CBR stream. We first evaluate the equilibrium queue length distribution embedded at tagged-cell arrival-time instants, based on whcih we calcuate the inter-cell time distribution and the distribution kof the number of tagged-cell departures in an arbitrary interval. Then we apply the analysis to the dimensionging problem of the leaky bucket parameters, examining how the employed traffic model affects the determination of the bucket size. Through numerical examples, we confirm that the Poisson traffic model can underestimate the bucket size, thus causing a considerable blocking probability for compliant use cells while the MMPP model can optimally design the bucket size which keeps the blocking probability under the target value.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.728-735
• /
• 2016

A 70 MHz temperature-compensated on-chip CMOS relaxation oscillator for mobile display driver ICs is proposed to reduce frequency variations. The proposed oscillator compensates for frequency variation with respect to temperature by adjusting the bias currents to control the change in delay of comparators with temperature. A bandgap reference (BGR) is used to stabilize the bias currents with respect to temperature and supply voltages. Additional temperature compensation for the generated frequency is achieved by optimizing the resistance in the BGR after measuring the output frequency. In addition, a trimming circuit is implemented to reduce frequency variation with respect to process. The proposed relaxation oscillator is fabricated using 45 nm CMOS technology and occupies an active area of $0.15mm^2$. The measured frequency variations with respect to temperature and supply voltages are as follows: (i) ${\pm}0.23%$ for changes in temperature from -30 to $75^{\circ}C$, (ii) ${\pm}0.14%$ for changes in $V_{DD1}$ from 2.2 to 2.8 V, and (iii) ${\pm}1.88%$ for changes in $V_{DD2}$ from 1.05 to 1.15 V.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.102-109
• /
• 1994

As a fundamental study to apply high pressure injection system to direct injection diesel engine, fuel injection system and constant volume combustion chamber were made and the behaviors of evaporating spray with the variation of injection pressure and the ambient gas temperature were observed by using high speed camera, and the combusion characteristics with the variation of injection pressure and A/F ratio were analyzed. As injection pressure increases, spray tip penetration and spray angle increase and, as a results spray volume increases. This helps an uniform mixing of fuel and air. Spray liquid core length decreases as ambient gas temperature increases, while it decreases as injection pressure increases but the effect of ambient gas temperature is dorminant. As injection pressure increases, ignition delay is shortened and combustion rate being raised, maximum heat release rate increases. It become clear that High injection pressure has high level of potential to improve the performance of DI-diesel engine.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.157-164
• /
• 2000

This paper presents a method to detect a rotor position and to drive a BLDC motor from standstill to medium speed without any position sensor comparing the current responses due to the inductance variation in the rotor position. A rotor position at a standstill is identified by the current responses of six pulses injected to each phase of a motor. Once the motor stars up pulse train that is composed of long and short pulses is injected to the phase corresponding to produce the maximum torque and the next phase continuously. it provides not only the torque but also the information of the next commutation time effectively when the response of long and short pulses crosses each other after the same time delay. This method which is verified experimentally using a DSP can drive a BLDC motor to the medium speed smoothly without any rattling and time delay compared with the conventional sensorless algorithm.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1199-1206
• /
• 2018

복합 위상천이기 구성은 배열안테나를 부 배열로 구성한 후, 부 배열 내부에는 일반적인 위상천이기를 사용하고, 부 배열 단위에는 실시간 지연 위상천이기를 사용하는 구성이다. 상기 구성은 빔 편이 현상을 효율적으로 개선할 수 있으나, 배열 구성이 적절하지 않으면 위상배열안테나 주 빔의 주파수 별 이득 편차가 발생하게 된다. 이와 같은 문제를 해소하기 위해 시스템 설계 주요 요구사항인 비 대역폭, 최대 빔 조향 각도 그리고 최대 이득 편차 제한 기준을 기반으로 효율적인 배열을 구성할 수 있는 간소화된 수식을 제시하였다.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.879-888
• /
• 1999

보다 선뢰적인 정보전송을 위하여 데이터 에러를 제어하기 위한 ARQ 기법의 연구는 중요하다. 특히 위성 통신에서는 긴 전송 지연시간에 의하여 성능의 차이가 크게 나타나므로 본 논문에서는 전송 지연시간을 중심으로 프레임의 길이. 채널용량, BER의 변화에 따른, SR ARQ와 기존의 고정된 코딩율을 갖는 type- I h hybrid ARQ 방식의 성능분석을 하였다. Type-I hybrid ARQ 방식에 사용되는 FEC(Forward Error Control) 방식으로는 BCH 코드를 사용하였고 BCH 코드율과 Window 크기. 데이터 속도 등 여러 가지 파라미터에 따 른 throughput을 분석하였다. 특히 기존의 SA W(Stop and Wait) ARQ의 식을 바탕으로 전송지연시간이 고 려된 type-I hybrid ARQ의 성능 관계식을 유도하였다. 다양한 전송 지연시간이 고려된 type-I hybrid ARQ 의 성능을 수치해석과 더불어 시뮬레이션을 통해 분석하여, 중요한 특성 결과를 얻게 되었다.