• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.60-65
• /
• 2009

In this paper, we present a compact Ultra-Wideband band-pass later with notched band at fireless-LAN band using a band-pass and band-notch filter. The structure of our proposed band-pass filter is very simple, and the DGS(Defected Ground Structure) structure is used to get the low-pass filter characteristic, and an embedded open-stub structure is used to get the notched filter. Our proposed band-pass filter can be much smaller than a cascaded filter. As a result of measurement, the insertion loss is less than 0.7dB throughout the pass-band of $2.21GHz{\sim}10.92GHz$, the return loss is more than 17dB and the group delay maximum variation is 0.24ns and a notched band is at $5.3GHz{\sim}5.7GHz$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.168-180
• /
• 2018

Due to the spread of mobile devices and the introduction of high-quality services, mobile traffic is expected to increase sharply and overload of cellular networks is expected. D2D communication is a way to reduce the load and evolve to 5th generation. Since D2D communication directly communicates between the terminals, it can reduce the overload of the cellular network and improve energy efficiency, data rate and network performance. This paper proposes a D2D handover scheme for D2D communication in cellular networks. The cellular network is a 3GPP EPS, and the proposed D2D handover method improves the existing EPS handover process considering compatibility between existing EPS and D2D communication. We also demonstrate the superiority of the proposed handover scheme using the network simulator ns-3. Simulation results show that the proposed handover scheme is superior to existing handover methods in terms of CUE variation, packet transmission delay time, and throughput.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.83-89
• /
• 2000

In hydraulic control system turbine and gear motor type flowmeters are widely used to measure the flow rate under steady flow conditions. With the recent growth of interest in the measurement of instantaneous values of unsteady flow rate the test of the transient response of these flowmeters are in some significance. however an unsteady flow rate mea-surment and its calibration method with a fast response and a high accuracy have not beendeveloped. In this research particularly the dynamic characteristics of turbine and gear motor type flowmeters are investigated experimentally and simple mathematical models are proposed. The measured flow rate waveforms are compared with those by remote instan-taneous flow rate measurement method(RIFM) which has been developed by author and used for calibration As the result of frequency response test gain and phase between the measured flow rate waveforms by turbine type flowmeter and those estimated by RIFM are in good agreement up to 70Hz For the gear motor type flowmeter th simulated results by a math-ematical model proposed here agree well with the experiment nearly up to 100Hz. Also it if sound that the pressure drop across the flowmeter is increased in proportion to the frequency of the flow rate variation in a high frequency region of more than 100Hz. It can be explained that the dealy of gear motor type flowmeter in high frequency regionis mainly attributed to a first order delay consisting of the inertia of gears and internal leakage of the gear motor.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.557-566
• /
• 2019

The evaluation of the seismic hazard for a given site is to estimate the seismic ground motion at the surface. This is the result of the combination of the action of the seismic source, which generates seismic waves, the propagation of these waves between the source and the site, and site local conditions. The aim of this work is to evaluate the sensitivity of dynamic response of extended structures to spatial variable ground motions (SVGM). All factors of spatial variability of ground motion are considered, especially local site effect. In this paper, a method is presented to simulate spatially varying earthquake ground motions. The scheme for generating spatially varying ground motions is established for spatial locations on the ground surface with varying site conditions. In this proposed method, two steps are necessary. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function. An empirical coherency loss model is used to define spatial variable seismic ground motions at the base rock. In the second step, power spectral density function of ground motion on surface is derived by considering site amplification effect based on the one dimensional seismic wave propagation theory. Several dynamics analysis of a curved viaduct to various cases of spatially varying seismic ground motions are performed. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effect, to spatial ground motions with considering coherency loss, phase delay and local site effects are also calculated. The results showed that the generated seismic signals are strongly conditioned by the local site effect. In the same sense, the dynamic response of the viaduct is very sensitive of the variation of local geological conditions of the site. The effect of neglecting local site effect in dynamic analysis gives rise to a significant underestimation of the seismic demand of the structure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.67-75
• /
• 2007

To improve low sense margin at low voltage, we propose a negatively driven sensing (NDS) scheme and to solve the problem of WL-to-BL short leakage fail, a variable bitline reference scheme with free-level precharged bitline (FLPB) scheme is adopted. The influence of the threshold voltage offset of NMOS and PMOS transistors in a latch type sense amplifier is very important factor these days. From evaluating the sense amplifier offset voltage distribution of NMOS and PMOS, it is well known that PMOS has larger distribution in threshold voltage variation than that of NMOS. The negatively-driven sensing (NDS) scheme enhances the NMOS amplifying ability. The offset voltage distribution is overcome by NMOS activation with NDS scheme first and PMOS activation followed by time delay. The sense amplifier takes a negative voltage during the sensing and amplifying period. The negative voltage of NDS scheme is about -0.3V to -0.6V. The performance of the NDS scheme for DRAM at the gigabit level has been verified through its realization on 1-Gb DDR2 DRAM chip.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.382-387
• /
• 2014

An all-reflective, simple noncollinear second harmonic (SH) autocorrelator is described for monitoring the shot-to-shot behavior of ultrashort high-power laser pulses. Two mirrors are used for the dispersion-free splitting of a pulse into two halves. One of the mirrors is able to adjust the delay time and angle between two halves of the laser pulse in a nonlinear crystal. We present the possibility of real-time measurement of the pulse duration, peak intensity (or energy), and the pointing jitters of a laser pulse, by analyzing the spatial profile of the SH autocorrelation signal measured by a CCD camera. The measurement of the shot-to-shot variation of those parameters will be important for the detailed characterization of laser accelerated electrons or protons.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.30-40
• /
• 2001

In this paper, we propose a dynamic slot allocation algorithm for efficient transmission of VBR services in wireless ATM networks. The proposed algorithm is based on a hybrid dynamic parameter(DP) control which combines the strength of in-band control and out-of-band control by considering the variation characteristics of buffer length in distributed mobile terminals. This algorithm consists of four sub-algorithms: dynamic parameter determination algorithm, dynamic parameter transmission algorithm, estimation algorithm of the number of request slots, and prorated-allocation algorithm. As the proposed allocation algorithm based on the hybrid DP control scheme can offer nearly precise MAC level estimations of the requirements for each VBR, the algorithm makes it possible to obtain ideal allocation efficiency. The allocation efficiency of the algorithm is shown by numerical analysis. Simulation results show that the proposed algorithm has better performance than conventional schemes in terms of allocation efficiency, delay and cell loss ratio under VBR traffic.

• Structural Engineering and Mechanics
• /
• v.65 no.4
• /
• pp.491-504
• /
• 2018

Because of sandwich structures with low weight and high stiffness have much usage in various industries such as civil and aerospace engineering, in this article, buckling and free vibration analyses of coupled micro composite sandwich plates are investigated based on sinusoidal shear deformation (SSDT) and most general strain gradient theories (MGSGT). It is assumed that the sandwich structure rested on an orthotropic elastic foundation and make of four composite face sheets with temperature-dependent material properties that they reinforced by carbon and boron nitride nanotubes and two flexible transversely orthotropic cores. Mathematical formulation is presented using Hamilton's principle and governing equations of motions are derived based on energy approach and applying variation method for simply supported edges under electro-magneto-thermo-mechanical, axial buckling and pre-stresses loadings. In order to predict the effects of various parameters such as material length scale parameter, length to width ratio, length to thickness ratio, thickness of face sheets to core thickness ratio, nanotubes volume fraction, pre-stress load and orthotropic elastic medium on the natural frequencies and critical buckling load of double-bonded micro composite sandwich plates. It is found that orthotropic elastic medium has a special role on the system stability and increasing Winkler and Pasternak constants lead to enhance the natural frequency and critical buckling load of micro plates, while decrease natural frequency and critical buckling load with increasing temperature changes. Also, it is showed that pre-stresses due to help the axial buckling load causes that delay the buckling phenomenon. Moreover, it is concluded that the sandwich structures with orthotropic cores have high stiffness, but because they are not economical, thus it is necessary the sandwich plates reinforce by carbon or boron nitride nanotubes specially, because these nanotubes have important thermal and mechanical properties in comparison of the other reinforcement.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.147-154
• /
• 2014

In this study, chlorine modeling technique based on fuzzy system is proposed to reduce the carcinogenic substance and decide the optimal chlorine injection rate, which is affected by chlorine evaporation rate in sedimentation basin according to detention time, weather and water quality. The additional chlorine meter is installed in the inlet part of sedimentation to reduce the feedback time and implement cascade control, which leads to maintaining the residual chlorine concentration decided by fuzzy rule. It helps to take a preemptive action about long time delay, the characteristics of the disinfection process, and reduce the variation of residual chlorine rate by 7.3 times and the chlorine consumption by 40,000 dollars. It made a significant contribution to supply hygienically safe drinking water.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.19-25
• /
• 2018

Objective: In practical breeding, selection is often performed by ignoring the accuracy of evaluations and applying economic weights directly to the selection index coefficients of genetically standardized traits. The denominator of the standardized component trait of estimated genetic evaluations in practical selection varies with its reliability. Whereas theoretical methods for calculating the selection index coefficients of genetically standardized traits account for this variation, practical selection ignores reliability and assumes that it is equal to unity for each trait. The purpose of this study was to clarify the effects of ignoring the accuracy of the standardized component trait in selection criteria on selection responses and economic weights in retrospect. Methods: Theoretical methods were presented accounting for reliability of estimated genetic evaluations for the selection index composed of genetically standardized traits. Results: Selection responses and economic weights in retrospect resulting from practical selection were greater than those resulting from theoretical selection accounting for reliability when the accuracy of the estimated breeding value (EBV) or genomically enhanced breeding value (GEBV) was lower than those of the other traits in the index, but the opposite occurred when the accuracy of the EBV or GEBV was greater than those of the other traits. This trend was more conspicuous for traits with low economic weights than for those with high weights. Conclusion: Failure of the practical index to account for reliability yielded economic weights in retrospect that differed from those obtained with the theoretical index. Our results indicated that practical indices that ignore reliability delay genetic improvement. Therefore, selection practices need to account for reliability, especially when the reliabilities of the traits included in the index vary widely.