• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.389-399
• /
• 1998

The DMR-II shared-medium access control protocol was developed for the ATM access network users to supper the isochronous traffic and the non-isochronous traffic simultaneously under the bandwidth-skating environment. In this paper we analyze the performance of the DMR-II protocol by using both the analytical analysis and the simulation method. Under the ATM access network environment, the performance analysis result shows that the DMR-II protocol maintains the delay variation of the isochronous traffic beyond the threshold value, and satisfies the delay time criteria of the non-isochronous traffic by supporting the priority service. Moreover the result shows high network utilization over 130% due to the destination release mechanism of the DMR-II protocol.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.24-30
• /
• 2006

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. When the stuff bits are generated by bit-stuffing mechanism in the CAN network, it causes jitter including variations in response time and delay In order to eliminate this jitter, stuff bits must be controlled to minimize the response time and to reduce the variation of data transmission time. This paper proposes the method to reduce the stuff bits by restriction of available identifier and bit mask using exclusive OR operation. This da manipulation method are pretty useful to the real-time control strategy with respect to performance. However, the CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO(Inha Semvung Humanoid Robot).

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.251-257
• /
• 2019

This paper proposes a new measurement method using virtual power concept to measure the effective value of 3-phase voltage with variable frequency. The conventional effective value measurement method uses a method of integrating data sampled during one or half cycle of the power voltage and averaging it. In this method, since the effective voltage is calculated every cycle, a time delay occurs in the measured effective voltage and it is s a problem to measure the effective value of a device whose frequency varies from time to time, such as a generator. The proposed 3-phase voltage rms measurement method has an advantage that it can measure accurate voltage RMS value regardless of measurement frequency variation. In particular, there is an advantage in that it is possible to measure a 3-phase effective voltage rather than an average value of the effective voltage of each phase in a 3-phase unbalance voltage. In addition, the validity of the proposed method is verified by using the Psim simulation tool and the experimental results are analyzed by applying the proposed measurement algorithm to the actual three phase synchronous generator voltage measurement experiment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.44-52
• /
• 2014

Leakage is an important factor to be considered for the management of underground water supply pipelines in a smart water grid system, especially if the pipelines are aged and buried under the pavement or various structures of a highly populated city. Because the exact detection of the location of such leaks in pipelines is essential for their efficient operation, a new methodology for leak location detection based on frequency band variation, windowing filters, and probability is proposed in this paper. Because the exact detection of the leak location depends on the precision of estimation of time delay between sensor signals due to leak noise, some window functions that offer weightings at significant frequencies are applied for calculating the improved cross-correlation function. Experimental results obtained by applying this methodology to an actual buried water supply pipeline, ~ 253.9 m long and made of cast iron, revealed that the approach of frequency band variation with those windows and probability offers better performance for leak location detection.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.567-575
• /
• 2017

In this study, when diagnosis pancreatic cancer by dual time point PET/CT, we propose SUVm 2.52 as the threshold value for performing the dual time point PET/CT exam. The hypothesis of normal distribution was adopted through data conversion of 60 pancreatic diseases. The proposed SUVm2.52 boundary value showed a significance level that could be applied to both 120 and 180 minutes of delay time scan for pancreatic cancer determination (p<0.05). C-value variation shows that delay time 2 hour test is more useful than delay time 3 hour test. When the SUVm 2.52 is set to the boundary value and the double-time point PET/CT exam is performed, the probability of distinguishing cancer from inflammation in the delayed image is 95%. When the delayed test is performed with the proposed boundary value SUVm 2.52, Compared with general PET / CT scans, it is thought that it may be helpful to distinguish pancreatic cancer.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.112-118
• /
• 2015

Conventional synchronous circuits cannot keep the circuit performance, and cannot even guarantee correct operations under the influence of PVT variations and aging effects in the nanometer regime. Therefore, in this paper, a DI (delay insensitive) design based NCL (Null Convention Logic) design methodology with a very simple design structure has been used to design digital systems, which is one of well-known asynchronous design methods robust to various variations and does not require any timing analysis. Because circuit-level structures of conventional NCL gates have weakness of low speed, high area overhead or high wire complexity, this paper proposes a new lNCL gates designed at the transistor level for high-speed, low area overhead, and low wire complexity. The proposed NCL gate libraries have been compared to the conventional NCL gates in terms of circuit delay, area and power consumption using a asynchronous multiplier implemented in dongbu 0.11um CMOS technology.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.115-124
• /
• 2010

VDF(volume-delay function) is one of the most important factor to improve the reliability of traffic demand estimation because it is for estimation of link travel time based on the traffic volume variation. Because VDF of link except for freeway is applied as the parameter of BPR(bureau of public road) of U.S., it causes to deteriorate the accuracy of traffic demand estimation. The purpose of this paper is to establish new parameter of VDF based on the real-surveyed traffic data in order to improve the problem of the existing VDF. We suggest the reclassification of road hierarchy, the approach of traffic survey, the estimating method of VDF parameter, and the improvements of new VDF application. The new VDF allows us to estimate more realistic traffic situation in parts of demand, travel time and path between origin-destination.

• Journal of IKEEE
• /
• v.17 no.1
• /
• pp.63-70
• /
• 2013

In this paper, we have implemented the performance evaluation system of the unified fuel heater for CRDI diesel engine. If the diesel engine be cold by low temperature in winter, then that makes the waxing materials like a paraffin and is the source of poor engine starting. The unified fuel heater is the barrow meter that estimate the start performance of diesel engine, and be tested by test chamber. The chamber perform the normal temperature, an extremely low temperature, an operating performance in an extremely high temperature, the resistance operation delay time and current operation delay time in setting up test resistance, the bimetal delay time test in temperature variation, the current and resistor test of the composited heater, a heating operation test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.145-158
• /
• 1997

Method for synchronizing multimedia data is needed to support continuous transmission of multimedia data through a network in a bounded time and it also required for supporting continuous presentation of multimedia data with the required norminal playout rate in distributed network environments. This paper describes a new synchronization method for supporting delay-sensitive multimedia Presentation without degration of Quality of services of multimedia application. It mainly aims to support both intermedia and intermedia synchronization by absorbing network variations which may cause skew or jitter. In order to remove asynchonization problems, we make use of logical time system, dynamic buffer control method, and adjusting synchronization intervals based on the quality of services of a multimedia. It might be more suitable for working on distribute[1 multimedia systems where the network delay variation is changed from time to time and no global clock is supported. And it also can effectively reduce the amount of buffer requirements needed for transfering multimedia data between source and destination system by adjusting synchronization intervals with acceptable packet delay limits and packet loss rates.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.207-216
• /
• 1999

A phased array is a multi-element piezoelectric device whose elements are individually excited by electric pulses at programmed delay time. One of the advantages of using phased array in nondestructive evaluation (NDE) application over conventional ultrasonic transducers is their great maneuverability of ultrasonic beam. There are some parameters such as the number and the size of the piezoelectric elements and the inter-element spacing of the elements to design phased array transducer. In this study, the characteristic of ultrasonic beam for phased array transducer due to the variation of the number of elements has been simulated for ultrasonic SH-wave on the basis of Huygen's principle. Ultrasonic beam directivity and focusing due to the change of time delay of each element were discussed due to the change of the number of piezoelectric elements. It was found that ultrasonic beam was much more spreaded and hence its sound pressure was decreased as steering angle of ultrasonic beam was increased. In addition, the ability of ultrasonic bean focusing decreased gradually with the increase of focal length at the same piezoelectric elements. However, the ability of beam focusing was improved as the number of consisting elements was increased.