• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.28-36
• /
• 1995

In this paper, a double loop control model using leaky delay LMS algorithm are proposed for active noise control. The proposed double loop control model estimates the loudspeaker characteristic and the error path transfer function with on-line using only gain and acoustic time delay to reduce computation burden. The control of error signal through double loop control scheme makes the more robust cntrol system. The input signal of filter to estimate acoustic time delay is used difference between input signal of input microphone and adaptive filter output. And also, in nonstationary environments, the leaky delay LMS algorithm is employed to counteract parameter drift of delay LMS algorithm. For practical noise signal, the proposed double loop control model reduces noise level about 12.9 dB.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.277-284
• /
• 2016

A new prediction scheme has been proposed for the robust teleoperation in a non-visible environment. The positioning error caused by the time delay in the non-visible environment has been compensated for by the Smith predictor and the sensory data have been estimated by the Grey model. The Smith predictor is effective for the compensation of the positioning error caused by the time delay with a precise system model. Therefore the dynamic model of a mobile robot has been used in this research. To minimize the unstable and erroneous states caused by the time delay, the estimated sensor data have been sent to the operator. Through simulations, the possibility of compensating the errors caused by the time delay has been verified using the Smith predictor. Also the estimation reliability of the measurement data has been demonstrated. Robust teleoperations in a non-visible environment have been performed with a mobile robot to avoid the obstacles effective to go to the target position by the proposed prediction scheme which combines the Smith predictor and the Grey model. Even though the human operator is involved in the teleoperation loop, the compensation effects have been clearly demonstrated.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.94-100
• /
• 2004

Ionospheric time delay is the biggest error source for single-frequency DGPSapplications, including time transfer and Wide Area Differential GPS (WADGPS).Currently, there are many attempts to develop real-time ionospheric time delayestimation techniques to reduce positioning error due to the ionospheric time delay.Klobuchar model is now widely used for ionosphehc time delay calculation forsingle-frequency users. It uses flat surface at night time and cosine surface atdaytime[1], However, the model was developed for worldwide ionosphere fit, it isnot adequate for local area single-frequency users who want to estimateionospheric time delay accurate1y[2]. Therefore, 3-D ionosphere model usingtomographic estimation has been developed. 3-D tomographic inversion modelshows better accuracy compared with prior a1gorithms[3]. But that existing 3-Dmodel still has problem that it requires many coefficients and measurements forgood accuracy. So, that algorithm has Umitation with many coefficients incontinuous estimation at the small region which is obliged to have fewermeasurements.In this paper, we developed an modified 3-D ionosphehc time delay modelusing tomography, which requires only fewer coefficients. Because the combinationsof our base coefficients correspond to the full coefficients of the existing model, ourmodel has equivalent accuracy to the existing. We confirmed our algorithm bysimulations. The results proved that our modified algohthm can perform continuousestimation with fewer coefficients.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1075-1086
• /
• 2004

In this paper, Time Delay Control(TDC) for robot manipulators is analyzed and its problems are founded. In order to remedy the problems, the enhanced controller is proposed and analyzed. The effect of friction associated with TDC is reported and its cause is presented. Through the analysis, simulation and experiment, it is shown that the friction effect causes serious degradation in control performance and that it is a result of the error of Time Delay Estimation(TDE) in TDC. In order to remedy the problems, TDC combined with Internal Model Control(IMC) concept is proposed. The proposed compensator is effective enough to handle the bad effect of friction, and is so simple and efficient as to match positive attribute of TDC. The simulation and experimental results show the effectiveness of proposed controller against the friction of the robot manipulators.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.271-278
• /
• 2021

In this paper, a tropospheric delay error was calculated by using meteorological data collect from weather station and Saastamoinen model, and an empirical variogram of the tropospheric delay in the Korean peninsula was estimated. In order to estimate the empirical variogram of the tropospheric delay according to weather condition, sunny day, rainy day, and typhoon day were selected as analysis days. Analysis results show that a maximum correlation range of the empirical variogram on sunny day was about 560 km because there is overall trend of the tropospheric delay. On the other hand, the maximum correlation range of the empirical variogram on rainy was about 150 km because the regional variation was large. Although there is regional variation when the typhoon exists, there is a trend of the tropospheric delay due to a movement of the typhoon. Therefore, the maximum correlation range of the empirical variogram on typhoon day was about 280 km which is between sunny and rainy day.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.441-446
• /
• 2013

A split-step time-domain model for the analysis of pulse delay characteristics through ring resonator all-pass filters (APF's) is developed and its accuracy is checked. The dependence of the delay time and pulse distortion on the coupling ratios is investigated using the model. It is observed that the bandwidth of the APF's needs to be wide enough to minimize the pulse distortion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.2
• /
• pp.98-111
• /
• 1990

In this paper a queneing model for the D channel access protocal recommeded by CCITT is developed, and delays of the signalling and packet messages are analyzed using the model, Behaviors of packet and signalling messages in the D-channel access system are also investigated. The analytical results have been verified by simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1004-1012
• /
• 1997

This paper proposes a new TRF(Transition Rise\Fall)delay model for the effcient hazard analysis in a 5-valued logic sumulation enviroment.For the hazzard for a given logic circuit, the timing analysis is first performed by means of a 5-valued logic simulator which uses the TRF delay model which incorporates the response delay for a reponse state with the transition delay for a transition state of an elment, and then hazards are detected through investigating timing relations.Simulation examples and experimental results are also given to demostrate the pradticability of the proposed methods.

• Journal of the Korean Mathematical Society
• /
• v.46 no.4
• /
• pp.713-731
• /
• 2009

In this paper, a three-dimensional eco-epidemiological model with delay is considered. The stability of the two equilibria, the existence of Hopf bifurcation and the permanence are investigated. It is found that Hopf bifurcation occurs when the delay ${\tau}$ passes though a sequence of critical values. The estimation of the length of delay to preserve stability has also been calculated. Numerical simulation with a hypothetical set of data has been done to support the analytical findings.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.15-19
• /
• 2005

The practical control problems for the lime-delay system is considered. The delay-free characteristics of the Smith Predictor is available only when both the process and it's model are exactly matched. So it does not used widely in practical industrial processes. In this paper, using the 2nd-order plus dead time model in place of the plant model of the Smith Predictor, the proposed controller shows the improved performance in case of the very long time delay. And the range of integral constant of the PI controller is also proposed.