• 제목/요약/키워드: Degree of crystallization

검색결과 109건 처리시간 0.023초

용철(熔鐵)에서의 가탄(加炭)에 관(關)한 연구(硏究)(1);가탄(加炭)에 미치는 탄소재(炭素材)의 결정화열처리(結晶化熱處理)의 영향 (Study on Carbon Pick-up in molten iron (I);Effect of Crystallization heat treatment of Carbon-bearing materials on Carbon Pick-up in molten iron)

  • 조원일;이종남
    • 한국주조공학회지
    • /
    • 제3권3호
    • /
    • pp.159-166
    • /
    • 1983
  • In order to develope domestic carburizers, the experiment was carried out by applying crystallization heat treatment to domestic anthracites and also to foreign products to compare with domestic anthracites.The present work was mainly concerned with the effect of their degree of crystallization of carbon-bearing materials on carbon pick-up in molten iron.Those effects were evaluated by the measurement of density, chemical composition, specific electric resistivity, and X-ray intensity of carbon-bearing materials. Experimental results thus obtained were summurized as follows. 1. The degree of crystallization of domestic anthracites and foreign products was increased with increasing heat treatment temperature. 2. The more degree of crystallization, the shorter the dissolving time of domestic anthracites in molten iron was obtained, while that of foreign products was remained constant. 3. As the degree of crystallization of domestic anthracites and foreign products was increased, the carbon content as well as carbon recovery in molten iron was increased.

  • PDF

Effects of Crystallization Behavior on Microwave Dielectric Properties of CaMgSi2O6 Glass-Ceramics

  • Choi, Bo Kyeong;Kim, Eung Soo
    • 한국세라믹학회지
    • /
    • 제50권1호
    • /
    • pp.70-74
    • /
    • 2013
  • Dependence of microwave dielectric properties on the crystallization behaviors of $CaMgSi_2O_6$ (diopside) glass-ceramics was investigated with different heat treatment methods (one and/or two-step). The crystallization behaviors of the specimens, crystallite size and degree of crystallization, were evaluated by differential thermal analysis (DTA), scanning electron microscope (SEM) and X-ray diffraction (XRD) analysis by combined Rietveld and reference intensity ratio (RIR) methods. With an increase in heattreatment temperature, the dielectric constant (K) and the quality factor (Qf) increased due to the increase of the crystallite size and degree of crystallization. The specimens heat-treated by the two-step method had a higher degree of crystallization than the specimens heat-treated by the one-step method, which induced improvement in the quality factor (Qf) of the specimens.

Synthesis and Non-Isothermal Crystallization Behaviors of Maleic Anhydride onto High Density Polyethylene

  • Ahn, Youngjun;Jeon, Jong Hyuk;Baek, Chul Seoung;Yu, Young Hwan;Thenepalli, Thriveni;Ahn, Ji Whan;Han, Choon
    • 한국세라믹학회지
    • /
    • 제53권1호
    • /
    • pp.24-33
    • /
    • 2016
  • The grafting reaction for maleic anhydride (MA) onto high density polyethylene (HDPE) was investigated from solution process with initiators. The chemical modification of neat HDPE was carried out with various contents of MA (3-21 wt.%) and initiator (0.2-1 wt.%) at different temperature ($80-130^{\circ}C$). The grafting degree was obtained from the titration and the highest grafting degree was 3.1%. The grafting degree increased as the content of MA and initiator increased, however, the highest grafting degree was demonstrated for a particular content of MA and initiator. In the non-isothermal crystallization kinetics, the Ozawa model was unsuitable method to investigate the crystallization behavior of MA onto HDPE, whereas the Avrami and Liu models found effective. The crystallization rate was accelerated as the cooling rate increased, but postponed by combination of MA onto neat HDPE backbone.

Influence of Amorphous Polymer Nanoparticles on the Crystallization Behavior of Poly(vinyl alcohol) Nanocomposites

  • Lee, Kyung-Jin;Lee, Ji-Hye;Hong, Jin-Yong;Jang, Jyong-Sik
    • Macromolecular Research
    • /
    • 제17권7호
    • /
    • pp.476-482
    • /
    • 2009
  • The crystallization behavior of poly(vinyl alcohol) (PVA) in the presence and absence of polypyrrole nanoparticles (PPy NPs) was investigated in terms of the heterogeneous nucleation effect of PPy NPs using FTIR, X-ray diffraction, differential scanning calorimeter and polarized optical microscope analysis. PPy NPs were prepared by dispersion polymerization method stabilized by PVA in aqueous solution. A polymer nanocomposite with uniform dispersity could be readily obtained due to the enhanced compatibility between the filler and matrix. Compared with the PPy NP-absent PVA, the PPy NP/PVA nanocomposite exhibited an enhanced degree of crystallinity. The degree of crystallinity increased up to 17% at the PPy NP concentration of 1 wt%, compared to the pristine PVA. The PPy NP acted as an effective nucleating agent during the crystallization process, thereby enhancing the degree and rate of crystallization. The kinetics study of the crystallization also revealed the decreased value of the Avrami coefficient in the case of the PPy NP/PVA nanocomposite.

열처리 조건에 따른 폴리(에틸렌 테레프탈레이트)의 열적 특성 및 결정화 거동 (Thermal Properties and Crystallization Behaviors of Poly(ethylene terephthalate) at Various Annealing Conditions)

  • 류민영;배유리
    • 폴리머
    • /
    • 제27권2호
    • /
    • pp.113-119
    • /
    • 2003
  • 폴리(에틸렌 테레프탈레이트) (PET)의 열처리 조건들 즉, 상대 습도, 온도 그리고 시간 등에 따라 나타나는 PET의 열적 특성과 결정화 거동에 대해서 연구하였다. PET샘플에 열처리를 수행한 후 수분 함유량, 유리 전이온도($T_g$), 그리고 결정화 온도($T_{\propto}$) 등의 변화를 조사하였다. 그리고 열처리된 PET시편에 대해서 결정화를 시키고 결정화도에 따른 열변형 온도(HDT)를 측정하였다. 또한 사출 성형으로 제작된 PET샘플의 열처리 후 잔류 응력의 완화를 편광 필름을 통하여 조사하였다. 열처리 시의 상대 습도, 온도, 그리고 시간이 증가함에 따라 PET샘플 내의 수분 함유량은 최대 6000 ppm이상 까지 증가하였다. $T_g$$T_c$는 시편 내에 수분 함유량이 증가할수록 감소하였다. PET샘플의 결정화도는 수분의 함유량이 증가함에 따라 증가되었다. 그러나 같은 양의 수분 함량에서 결정화도는 열처리의 조건에 따라 다르게 나타났다. PET샘플 내의 잔류응력의 완화는 열처리 조건에 따라 다르게 나타났으며, PET샘플 내에 잔류 응력이 감소할수록 최대 결정화도는 증가하였다.

Study on the Isothermal Crystallization Behaviors of PEN/TLCP Blends

  • Park, Jong-Ryul;Yoon, Doo-Soo;Lee, Eung-Jae;Bang, Moon-Soo;Choi, Jae-Kon
    • Elastomers and Composites
    • /
    • 제51권1호
    • /
    • pp.56-62
    • /
    • 2016
  • The isothermal crystallization behaviors of blends of poly(ethylene naphthalate) (PEN) and a thermotropic liquid crystalline polymer (TLCP) were investigated by differential scanning calorimetry (DSC) as functions of crystallization temperature and blend composition. Avrami analyses were applied to obtain information on the crystal growth geometry and the factors controlling the rate of crystallization. The crystallization kinetics of the PEN/TLCP blends followed the Avrami equation up to a high degree of crystallization, regardless of crystallization temperature. The calculated Avrami exponents for PEN/TLCP revealed three-dimensional growth of the crystalline region in each blend. The crystallization rate of each blend increased as the crystallization temperature decreased, and decreased as the TLCP content increased. The crystallization of PEN in the blend was affected by the addition of TLCP, which acts as a nucleating agent.

Enhanced Crystallization Behaviour and Microwave Dielectric Properties of 0.9CaMgSi2O6-0.1MgSiO3 Glass-Ceramics Doped with TiO2

  • Jo, Hyun Jin;Sun, Gui Nam;Kim, Eung Soo
    • 한국세라믹학회지
    • /
    • 제53권2호
    • /
    • pp.139-144
    • /
    • 2016
  • The dependence of the microwave dielectric properties of the glass-ceramic composite $0.9CaMgSi_2O_6-0.1MgSiO_3$ on the crystallization behaviour was investigated as functions of the $TiO_2$ content and heat-treatment temperature. The crystallization behaviour of the specimens was evaluated via a combination of the Rietveld and reference-intensity ratio methods. For specimens with a $TiO_2$ content of up to 1 wt.%, a monoclinic diopside phase was formed, whereas a secondary $TiO_2$ phase was formed with further increases in the $TiO_2$ content. The quality factor (Qf) of the specimens was strongly dependent on the degree of crystallization. The highest Qf value was obtained with a $TiO_2$ content of 0.5 wt.%, which was improved by increasing the heat-treatment temperature. The dielectric constant (K) was affected by the size of the crystallites and the $TiO_2$ content. The temperature coefficient of the resonant frequency (TCF) was nearly constant for all of the specimens, regardless of the $TiO_2$ content or heattreatment temperature.

핵제 및 가소제 첨가에 따른 PLA(PolyLactic Acid)의 결정화도 개선 및 결정구조에 관한 연구 (Effects of nucleating agents and plasticizers on the crystallinity and crystal structure of PLA(PolyLactic Acid))

  • 박은조;박헌진;김동학
    • 한국산학기술학회논문지
    • /
    • 제16권1호
    • /
    • pp.914-920
    • /
    • 2015
  • 본 논문에서는 PLA(PolyLactic Acid)의 결정화도 및 결정구조에 대해 연구하였다. PLA는 옥수수 전분으로부터 추출한 Lactic acid로부터 얻어지는 친환경적인 열가소성 플라스틱으로 매립시 미생물에 의해 완전히 분해되는 소재로 각광받고 있지만 열 안정성이 낮고 낮은 결정화도로 인해 높은 기계적 물성이 요구되는 용도에는 부적합한 단점을 가지고 있다. 이 중에서도 낮은 결정화도와 느린 결정화 속도는 사출 성형 공정에서 Cycle time을 증가시키는 요인으로 다른 소재와의 경쟁에 매우 큰 단점으로 나타난다. 본 논문에서는 핵제 및 가소제의 종류와 함량에 따른 결정화도 및 결정화 속도의 변화를 연구함으로써 궁극적으로 사출 성형 공정에서 Cycle time을 개선하고자 하였다.

액정 고분자와 폴리(에틸렌 테레프탈레이트) 블렌드의 결정화 거동 (Crystallization Behaviors of Liquid Crystalline Polymer/poly(ethylene terephthalate) blends)

  • 방문수
    • 한국산학기술학회논문지
    • /
    • 제7권4호
    • /
    • pp.559-566
    • /
    • 2006
  • 폴리(에틸렌 테레프탈레이트)와 액정 폴리에스테르의 블렌드를 등온 결정화 거동에 대하여 연구하였다. 블렌드내의 PET의 결정화 거동을 나타내주는 결정화 속도나 결정이 어떤 모양으로 성장하는가에 대한 정보를 얻기위해 Avrami 식을 이용하였다. 블렌드내 PET의 결정화는 결정화온도에 무관하게 높은 결정화도에 이르기까지 Avrami 식에 잘 적용됨을 알 수 있었으며 Avrami 지수값, n이 2를 나타냄으로써 블렌드내의 PET의 결정이 1차원적으로 성장함을 알 수 있었고, 결정화 온도가 높을수록 결정화 속도가 느려짐을 조사 결과 확인하였다.

  • PDF

생체분해성 Poly(glycolide-co-ε-caprolactone-co-L-lactide) 블록 공중합물의 비등온 결정화 거동에 관한 연구 (Non-isothermal Crystallization Behavior of Poly(glycolide-co-ε-caprolactone-co-L-lactide) Block Copolymer)

  • 최세영;송승호
    • Elastomers and Composites
    • /
    • 제49권1호
    • /
    • pp.13-23
    • /
    • 2014
  • 본 연구에서는 생체분해성 폴리에스터 계열의 glycolide, L-lactide 및 ${\varepsilon}$-caprolactone 단량체를 이용하여 2단계 중합법에 의한 삼원 공중합체를 제조하여, DSC를 이용한 비등온 결정화 거동을 고찰하였다. 보다 더 정확한 거동을 검토하기 위하여 Avrami 식과 Ozawa 식을 조합하여 비등온 결정화 거동을 고찰하였다. 과냉각도를 분석한 결과 PGCLA21의 값이 가장 큰 값을 보이고 있으며 L-lactide 함량이 증가함에 따라 과냉각도는 증가하는 경향을 보이고 있다. 수정된 Avrami 식을 이용하여 다양한 냉각속도에서 비등온 결정화 거동 결정화 속도 상수는 큰 경향을 보이고 있지 않는 것을 알 수 있었다. Avrami 및 Ozawa 식을 조합하여 특정한 상대적 결정화도에서의 냉각함수를 구한결과 L-lactide 함량이 증가하면서 PGCL과 비교시 결정화 속도를 향상시키는 역할을 하고 있는 것으로 여겨지는 반면 PGCLA41과 PGCLA21을 비교시 L-lactide 함량이 일정 이상 증가시 logF(T) 값이 큰 것을 확인 할 수 있는데 이는 동일한 결정을 얻는데 더 많은 냉각 속도를 필요로 한다는 것을 의미하며 결정화 속도 향상에 부정적인 영향을 미치는 것으로 판단된다.