• 한국식품영양학회지
• /
• 제33권6호
• /
• pp.681-691
• /
• 2020

This study was conducted to evaluate the characteristics of bread and the rheology of flour dough containing chlorella powder(0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5%). In the farinograph test, the addition of chlorella powder changed water absorption, development time and mixing tolerance index for making bread. As the amount of chlorella powder increased, the water absorption increased, mixing tolerance index and the development time decreased. In the extensograph test, the degree of extension and resistance was decreased with increasing of chlorella powder content. In the amylograph test, the maximum viscosity was slightly decreased with increasing of chlorella powder contents. The colors of L value in bread crumb was significantly decreased as the chlorella powder addition. After fermentation treatment, The dough with 2.5% chlorella powder showed the lowest dough raising power compared to the other doughs. The addition of the chlorella powder had significant effect on bread texture. The bread consisting of 0.5% chlorella powder showed the highest volume of loaf and specific volume. Therefore, high quality of bread can be achieved by adding chlorella powder.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.108-120
• /
• 1998

A theoretical study of three-dimensional unsteady compressible non-reacting flow inside double flow of monolith catalytic converter system attached to 6-cylinder engine was performed for the achievement of performance improvement, reduction of light-off time, and longer service life by improving the flow distribution of pulsating exhaust gases. The differences between unsteady and steady-state flow were evaluated through the numerical computations. To obtains the boundary conditions to a numerical analysis, one dimensional non-steady gas dynamic calculation was also performed by using the method of characteristics in intake and exhaust system. Studies indicate that unsteady representation is necessary because pulsation of gas velocity may affect gas flow uniformity within the monolith. The simulation results also show that the level of flow maldistribution in the monolith heavily depends on curvature and angles of separation streamline of mixing pipe that homogenizes the exhaust gas from individual cylinders. It is also found that on dual flow converter systems, there is severe interactions of each pulsating exhaust gas flow and the length of mixing pipe and junction geometry influence greatly on the degree of flow distribution.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.87-91
• /
• 2008

The study examined fire resistance of concrete followed by change of mixed rate in PP and NY composite fiber and the results were as follows. In the event of fluidity in concrete not set, plane satisfied 600±100, its target slump flow, and fluidity was reduced as organic fiber's mixed rate was increased. Air amount satisfied 3.0±1.0, its target air amount, and didn't have distinct differences in reduction and increase according to organic fiber's kind and change of its mixed rate. However, it had a tendency that fluidity was reduced as the mixed rate was increased. In characteristics of hardening concrete, the 28th day compressive strength followed by organic fiber's kind and change of its mixed rate didn't have a lot of differences and satisfied high strength scope as about 70MPa. In spalling characteristics after fire resistance test, spalling was happened in non-mixture, plane combination, and P1N0. In other combinations, spalling resistance was happened. The relic compressive strength rate was 56%, the best condition, in P3N1(PP0.03%, NY0.01% compositeness) mixing PP fiber with NY fiber at once.

• 한국주거학회논문집
• /
• 제20권2호
• /
• pp.101-108
• /
• 2009

The purpose of this study is to develop basic data for the design of the housing space for unit that factors in the sentiment of the residents by using aesthetic elements and expression method to search for the ways to design housing space for differentiated unit. The results are as follows: First, aesthetic elements in the aesthetic element in the unit housing space for unit can be classified into basic elements and detailed elements. Second, it is possible to classify into distortion, mixing, superposition and juxtaposition methods. Third, use of the 'material' for 'wall' is recommended when designing differentiated housing space by using basic elements. At this time, expression using the method of 'mixing' is effective for inducing differentiation. In particular, elements that can perceive the difference in time are mixed, to add on slight differentiation. Fourth, 'illumination' and 'material' are used when designing differentiated housing space by using detailed elements. Fifth, preference degree of the expression method is manifested differently depending on the selected elements. Lastly, this study conducted a study on the preference level of the aesthetic elements and expression method targeting the experts alone to differentiate the design of the residential space for unit.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.68-69
• /
• 2020

Recently, the problem of air pollution is drawing attention as a social problem worldwide. Particularly, fine dust is the biggest issue among air pollutants, and it is analyzed that fine dust is generated from air pollutants such as burning fossil fuels such as petroleum or coal, or exhaust gases from automobiles. In addition, yellow dust originating from China adjacent to Korea flows into the Korean Peninsula in a western wind, causing the concentration of fine dust to deteriorate. Fine dust is a harmful substance to the human body such as asthma or respiratory disease, and awareness of the risk is also increasing to a degree designated as a primary carcinogen. In this study, as a method for improving the indoor air quality, the Properties of the matrix according to the mixing ratio of powdered activated carbon based on blast furnace slag are reviewed. The flexural strength and compressive strength were measured, and a fine dust concentration measurement experiment will be conducted later.

• 로봇학회논문지
• /
• 제6권3호
• /
• pp.210-219
• /
• 2011

This paper studies how to combine devices such as monocular/stereo cameras, motors for panning/tilting, fisheye lens and convex mirrors, in order to solve vision-based robotic problems. To overcome the well-known trade-offs between optical properties, we present two mixed versions of the new systems. The first system is the robot photographer with a conventional pan/tilt perspective camera and fisheye lens. The second system is the omnidirectional detector for a complete 360-degree field-of-view surveillance system. We build an original device that combines a stereo-catadioptric camera and a pan/tilt stereo-perspective camera, and also apply it in the real environment. Compared to the previous systems, we show benefits of two proposed systems in aspects of maintaining both high-speed and high resolution with collaborative moving cameras and having enormous search space with hybrid configuration. The experimental results are provided to show the effectiveness of the mixing collaborative and hybrid systems.

• 한국환경보건학회지
• /
• 제22권4호
• /
• pp.82-90
• /
• 1996

This study was performed to find the optimum mixing ratio of paper waste in composting of mixture of swine feces and newspaper. Using the experimental setting of aeration rate which was found in the experiment carried out priorly, and moisture contents reported in other literature, just the initial C:N ratios were differentiated by mixing different amount of newspaper with the same amount of swine feces. This study was carried out by operating 4 experimental cornposting reactors of bench scale for 3 weeks. The followings are the conclusions that were derived from this study. 1. During composting reaction, the C:N ratio of each cornposter was decreased. Degree of decrease was in order of run 3, run 2, run 4, and run 1 of which initial C:N ratio was 30, 25, 35, and 20 respectively. All of the final composts were found to be completed composting reaction. 2. Ash contents of each reactor increased rapidly in order of run 3, run 2, run 4, and run 1. The absolute values of quadratic effect coefficients of each second order regression function was 0.059, 0.038, 0.032, and 0.030 respectively. Ash contents evolution trend had a linear correlation with the C:N ratio trend. (r=-0.96932, p<0.05) 3. The range of highest temperatures reached during composting was 47.2-53.5$\circ$C. Those were not significantly different from one another. Thermophilic temperatures were maintained in the range of 48-108 hours. 4. Contents of heavy metal detected in the final compost were lower than those of Korean and European standards. 5. Concentration range of Nitrogen in the final compost was 1.11-2.27%, and that of phosphorus was 8.40-10.70 mg/kg. 6. The optimum C:N ratio which has been proposed without the consideration of types of bulking agents should be re-examined. Biodegradabilities of each bulking agents was thought to be important factor when determining the optimum initial C:N ratio for cornposting.

• 한국식품저장유통학회지
• /
• 제9권3호
• /
• pp.298-303
• /
• 2002

김치타블렛의 영양성과 기호성을 개선하기 위하여 부재료로 유자, 사과, 당근, 표고버섯의 혼합조건을 반응표면분석법으로 검토하였다. 당근분말은 0.75 g 첨가시에 타블렛의 견고성이 낮았으며, 표고버섯은 첨가량이 증가할수록 견고성이 증가하였다. 사과는 1.0 g 이상으로 첨가될 경우, 표고버섯 및 당근의 첨가량이 견고성에 미치는 영향은 크지 않았다. 김치 타블렛의 hue angle은 유자, 사과, 당근 및 표고버섯의 첨가량이 0.5 g 이하 및 1.0 g 이상일 때는 83∼86, 0.75 g로 첨가하였을 패는 88을 나타내었다. 인공담즙액에서의 용해도는 당근의 경우는 큰 영향이 없었으며 표고버섯은 1.0 g, 사과는 0.75 g 첨가구에서 용해성이 높았다. 타블렛의 종합적 기호도는 사과와 당근의 첨가량이 높을수록, 표고버섯은 0.75 g에서 높았다. 각 반응변수에 미치는 독립변수의 영향을 조사한 결과 당근만이 김치 타블렛의 hue angle에 영향을 미칠 뿐 그 외 다른 부재료는 반응변수에 대하여 큰 영향이 없는 것으로 나타났다. 따라서 당근, 사과 및 표고는 0.75 g을 중심으로 폭넓은 첨가가 가능하였다.

• Journal of the korean society of oceanography
• /
• 제31권2호
• /
• pp.75-88
• /
• 1996

The analytic and numerical solution of the 1$\frac{1}{2}$-layer and 2$\frac{1}{2}$-layer models are derived. The large coastal-sea level drop and the fast westward speed of the anticyclonic gyre due to strong offshore winds using two ocean models are investigated. The models are forced by wind stress fields similar in structure to the intense mountain-pass jets(${\sim}$20 dyne/$cm^{2}$) that appear in the Gulfs of Tehuantepec and Papagayo in the Central America for periods of 3${\sim}$7 days. Analytic and numerical solutions compare favorably with observations, the large sea-level drop (${\sim}$30 cm) at the coast and the fast westward propagation speeds (${\sim}$13 km/day) of the gyres. The coastal sea-level drop is enhanced by several factors: horizontal mixing, enhanced forcing, coastal geometry, and the existence of a second active layer in the 2$\frac{1}{2}$-layer model. Horizontal mixing enhances the sea-level drop because the coastal boundary layer is actually narrower with mixing. The forcing ${\tau}$/h is enhanced near the coast where h is thin. Especially, in analytic solutions to the 2$\frac{1}{2}$-layer model the presence of two baroclinic modes increases the sea-level drop to some degree. Of theses factors the strengthened forcing ${\tau}$/h has the largest effect on the magnitude of the drop, and when all of them are included the resulting maximum drop is -30.0 cm, close to observed values. To investigate the processes that influence the propagation speeds of anticyclonic gyre, several test wind-forced calculations were carried out. Solutions to dynamically simpler versions of the 1$\frac{1}{2}$-layer model show that the speed is increased both by ${\beta}$-induced self-advection and by larger h at the center ofthe gyres. Solutions to the 2$\frac{1}{2}$-layer model indicate that the lower-layer flow field advects the gyre westward and southward, significantly increasing their propagation speed. The Papagayo gyre propagates westward at a speed of 12.8 km/day, close to observed speeds.

• Elastomers and Composites
• /
• 제6권1호
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.