• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.101-105
• /
• 1994

A/F sensor with a sensing and a pumping element, which is made of YSZ(yttria stabilized zirconia) sheets, can be used for the combustion control of lean burn engine. A/F sensor can detect the oxygen partial pressure in more wide range than the other oxygen sensors, such as the limiting current type oxygen sensor and λ-sensor. However this sensor has the disadvantage that the characteristics has been degraded rapidly due to the physical or electrochemical reasons. The blackening phenomenon is known as one of the degradations caused by high voltage biased for oxygen pumping. In this paper, we have studied to analyze the blackening phenomenon by comparing two characteristics between before and after blackening in impedance spectroscopy, and discussed the blackening mechanism.

• Journal of Microbiology and Biotechnology
• /
• 제14권2호
• /
• pp.426-429
• /
• 2004

Eleven fungal strains previously isolated from the Mexican desert were evaluated for their capacity to use catechin as carbon source in submerged cultures. At 2 g/l of catechin, all strains grew better than the control strains, Aspergillus niger Aa-20. Aspergillus niger PSH and Penicillium commune EH2 degraded 79.33％ and 76.35％ with degradation rates of 0.0065 and 0.0074 g/l/h, respectively, when an initial catechin concentration of 3 g/l was used. Obtained results demonstrated the potential biotechnological capacity of these fungal strains to use condensed tannins as carbon source.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.214-214
• /
• 2000

This paper deals with the non contact optical sensor to measure the shape of transparent plates such as glass panel of LCD(Liquid Crystal Display). The conventional methods to obtain the shape or thickness of a transparent plates are contact type sensor such as LVOT(Linear Variable Differential Transformer). Due to the contact between the tip of the sensor and the surface of objects, the tip is abraded. In addition, the high temperature glass casting makes the size of sensor body changed. These reasons makes the sensor degraded. In this paper, to overcome these problem, we proposed a low cost noncontact optical sensor this is composed of the Hologram laser unit of a CD-Pickup and a plastic lens. To evaluate the performance of the proposed optical sensor, a series of experiments were performed for various measurement condition. Based upon observation of the experimental result, the developed sensor shows good result for measuring the shape of transparent plates.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.166-173
• /
• 2000

Various kinds of water soluble N,N,N-trimethylchitosan ammonium chloride(TMC) with different molecular weights were synthesized to examine the antimicrobial activity against Methicillin Sensitive Staphylococcus aureus(MSSA) and Methicillin Resistant Staphylococcus aureus(MRSA), which causes serious hospital infection, and to apply them to antimicrobial finishing agents for textiles. Chitosan samples were highly deacetylated with sodium hydroxide solution and degraded with hydrogen peroxide to control the molecular weight. TMC has the antimicrobial activities against MRSA and MSSA. TMC showed an excellent antimicrobial activity below the molecular weight of 70,000, especially at 40,000. The minimum inhibitory concentration (MIC) of TMC with optimum molecular weight against MRSA and MSSA was 250ppm. Because MRSA did not resist TMC in the subculture test of bouillon medium, it was expected that the successive use of TMC against MRSA was possible.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.452-454
• /
• 1998

Asymmetric cylinders are usually used as an actuator of active suspensions. The conventional optimal controller design does not include actuator dynamics as a state. and force controller is needed to track the desired force. But the actuator is not ideal, so performance of an active suspension system is degraded. In this paper, we take account nonlinear actuator dynamics and obtain a linear model using a feedback linearization technique then apply optimal control method. For real time application, gain-scheduling method is used. Effectiveness of proposed method is demonstrated by numerical simulation of 1/4 car model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.575-577
• /
• 1998

In this paper, we propose a hybrid target tracking algorithm which combine the conventional Kalman filter algorithm and the fuzzy neural network. Conventional methods are degraded in the presence of uncertanties and the environmental noise. These problems can be resolved by the proposed method. The training data for the proposed target tracker is obtained by the off-line simulation. Unlike other target trackers usging fuzzy inference system, our method can be easily integrated into the existing system. A numerical simulation is included to show the effectiveness and the feasibility of the proposed method.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.74-78
• /
• 1994

Degradation of thin oxide by doped poly-Si and its improvement were studied. The gate oxide can be degraded by phosphorous in poly-Si doped POCl3. The degradation is increased with the decrement of sheet resistance and poly-Si thickness. Oxide failures of amorphous-Si are higher than those of poly-Si. In-situ double deposition of amorphous-Si, 54$0^{\circ}C$/30 nm, and poly-Si, 6$25^{\circ}C$/220 nm, forms the mismatch structure of grain boundary between amorphous-Si and poly-Si, and suppresses the excess phosphorous on oxide surface by the mismatch structure. The control of phosphorous through grain boundary improves the oxide reliability.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권10호
• /
• pp.659-664
• /
• 2000

This paper presents a new design method for improving the torque performance of a switched reluctance motor (SRM) for high speed applications. The drawback of the conventional design method based on the overall static average torque maximization is that the torque control performance is degraded at high speed. On the other hand, the proposed method optimizes the torque profile by diving it into several regions so that it is suitable for high speed operation. This multi-objective optimization problem is solved by using a fuzzy optimization algorithm which incorporates a finite element method. The torque performance of the motor for various speed ranges is investigated and the optimally designed motor show a better performance at high speed.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.849-855
• /
• 1987

This paper describes an implementation of the absolute moment block truncation coding(AMBTC) in real time for the moving picture data compression. We have realized a system composed of the encoder and decoder, and operated it using an NTSC TV signal. The encoder consists of a 4-1line buffer memory and a data processing block. Besides, there are signal conditioner and a control signal generator. Experimental results show that the quality of the processed image with a data rate of 10Mb/s is slightly degraded, but not objectionable, comparing data rate of 80Mb/s.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.859-862
• /
• 2008

We have realized static image on organic light emitting diodes (OLEDs) using photoluminescence degradation. Ultraviolet (UV) was irradiated to the glass side of device. UV power was 350 Wand the wavelength was 365 nm. The UV irradiation gives rise to the degradation of photoluminescence. Due to the degradation, the current density-voltage curve was shifted to the higher voltage side and the luminescence was also degraded by the current and photoluminescence drop. The negative imaged films were prepared to control the transmittance of UV. The UV light was passed through the film. By this method, the film image was transferred to the device with reversed image and the static image was realized on the OLED.