• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.772-784
• /
• 2024

The hexagonal nodal code RENUS has been enhanced to handle irregularly deformed hexagonal assemblies. The underlying RENUS methods involving triangle-based polynomial expansion nodal (T-PEN) and corner point balance (CPB) were extended in a way to use line and surface integrals of polynomials in a deformed hexagonal geometry. The nodal calculation is accelerated by the coarse mesh finite difference (CMFD) formulation extended to unstructured geometry. The accuracy of the unstructured nodal solution was evaluated for a group of 2D SFR core problems in which the assembly corner points are arbitrarily displaced. The RENUS results for the change in nuclear characteristics resulting from fuel deformation were compared with those of the reference McCARD Monte Carlo code. It turned out that the two solutions agree within 18 pcm in reactivity change and 0.46% in assembly power distribution change. These results demonstrate that the proposed unstructured nodal method can accurately model heterogeneous thermal expansion in hexagonal fueled cores.

• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.147-153
• /
• 2016

SHRIMP U-Pb age determination was carried out for deformed granites in the Aneui quadrangle, SW Yeongnam Massif. Dating of zircons from a highly deformed mylonitic granite with banded structure and a relatively less deformed porphyritic to augenic granites, that were known as Precambrian gneisses, yielded the same age of ca. 195 Ma. On the basis of this result and previous age data, Early to Middle Mesozoic igneous activity around the Aneui area was interpreted as follows; Subduction-related granitic magmatism started with the intrusion of the Hamyang Granite in the middle Triassic (ca. 225-219 Ma) mainly in the west of the area and ended with syenitic intrusion at the end of Triassic period (ca, 220-210 Ma). After a relatively short period of quiescency, granitic magmatism restarted with the intrusion of magma forming deformed granites dated in this study at the Early Jurassic of ca. 195 Ma and continued to ca. 189 Ma and dioritic intrusion was associated around the late stage of granitic magmatism.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.108-116
• /
• 2018

A melted bead microstructure can be divided into a deformed and undeformed layer. Measurement errors occur in the presence of a deformed layer, which should be removed through grinding/polishing whilst preserving the original structure. This paper proposes a grinding/polishing process to analyze the microstructure of copper melted beads. For the removal of the deformed layer, the correlation between the abrasive type/size, the polishing time and polishing rate was analyzed and the thickness of the deformed layer was less than $1{\mu}m$. The results suggest a new grinding/polishing procedure: silicon carbide abrasive $15{\mu}m$ (SiC P1200) 2 min, and $10{\mu}m$ (SiC P2400) 1 min; and diamond abrasive $6{\mu}m$ 8 min, $3{\mu}m$ 6 min, $1{\mu}m$ 10 min, and $0.25{\mu}m$ 8 min. In addition, a method of increasing the sharpness of the microstructure by chemical polishing with $0.04{\mu}m$ colloidal silica for 3 min at the final stage is also proposed. The overall grinding/polishing time is 38 min, which is shorter than that of the conventional procedure.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.32-40
• /
• 1998

Alveolar ridge augmentation and preservation techniques designed to reconstruct deformed alveolar ridge now occupy a major role in esthetic dentistry. Previously, deformed alveolar ridges were filled with plastic materials(porcelain or resin) of prosthesis to restore ridge contours, which resulted in larger teeth and food impaction under the pontic base. So, prostheses of this type were unacceptable and really detectable when patients smiled. But nowadays, alveolar ridge augmentation procedures enable the dentists to provide patients with fixed prostheses that are esthetic. The development of guided tissue regeneration technique and materials also have made a major impact on extending the scope of therapeutic horizons in dentistry.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.1155-1161
• /
• 2014

In this paper, we rederive the identity ${\Gamma}_q(x){\Gamma}_q(1-x)={\frac{{\pi}_q}{sin_q({\pi}_qx)}$. Then, we give q-analogue of Gauss' multiplication formula and study representation of q-oscillator algebra in terms of the q-factorial polynomials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.647-652
• /
• 1999

The purpose of this study is to find the bond properties of deformed bars in hign-strength concrete by experimental and analytical method. In this study the following variables were adopted, i.e. (1) the compressive strength of concrete : 270, 400 and 600kg/$\textrm{cm}^2$ (2) the corrosion the bars : corroded and normal bars (3) the mixing ratio of natural and smashed fine aggregate : 7 : 3 and 5 : 5 (natural sand : smashed sand) For analytical method, the finite element analysis is performed. And the Pull-out test is performed as the experimental method.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.49-54
• /
• 2002

The Finite Element Method is applied to the determination of the deformed bulge profile and strain distribution during upset forming of cylindrical billets. From the results of simulation, the bulging along the z-axis becomes more severe with increasing eight reduction, and with increasing friction at the die-material interface. The present method can be used for the simple prediction of the deformed shape and strain distribution in upset forging of cylindrical billets with dissimilar fictional conditions at the die-material interfaces.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.46-58
• /
• 1991

An upper-bound method is applied to determine the final-stage extrsuion load and the deformed configuration of extruded billet. A simple kinematically admissible velocity field for trhee-dimensional deformation at final-stage is proposed. From the proposed velocity field the upper-bound extrusion load, the velocity distribution and the configuration of extruded billet are determined byminimizing the otoal power consumption. Experiments are carried out with full-annealed commercial aluminum billets at room temperature by using different sizes of elliptic punches. The theroretical predictions both in extrusion load and deformed configuration of extruded billet are ingood agreements with the experimentalresults.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1066-1068
• /
• 1993

Magnetostrictive materials are deformed by applying magnetic fields as electrostrictive materials are deformed by applying electric fields. The GMA(Giant Magnetostrictive Alloy: Terfenol-D) shows larger strain and force compared with piezoceramics and SMA. It is expected that the GMA replaces the piezoceramics in various applications. In this paper, the basic properties of GMA and the current trends of its application are introduced.

• Transactions of Materials Processing
• /
• v.13 no.5
• /
• pp.449-454
• /
• 2004

The annealing behavior of a 5083 Al alloy deformed at cryogenic temperature was investigated, focusing on the evolution of microstructures and mechanical properties. Especially, the effects of annealing temperature, $150~300^{\circ}C$, and time, 3∼60min., on microstructures and mechanical properties of the sheets received 85% reduction at cryogenic temperature were investigated. The optimization of the annealing conditions resulted in a mixture of equiaxed grains and elongated subgrains, exhibiting a good combination of uniform elongation and high strength.