Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Analysis of Free Forging of Cylindrical Billets by Using finite Element Method

유한요소법을 이용한 원통형 강편의 자유단조 해석

  • 정동원 (제주대학교 기계에너지생산공학부)
  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The Finite Element Method is applied to the determination of the deformed bulge profile and strain distribution during upset forming of cylindrical billets. From the results of simulation, the bulging along the z-axis becomes more severe with increasing eight reduction, and with increasing friction at the die-material interface. The present method can be used for the simple prediction of the deformed shape and strain distribution in upset forging of cylindrical billets with dissimilar fictional conditions at the die-material interfaces.

Keywords

References

  1. 소성학 김동원
  2. 기계공작법 김동원
  3. 한국해양공학회지 v.13 no.2 박막, 쉘 혼합요소의 판별조건과 강소성,탄소성 유한요소해석 적용에 관한 연구 정동원;양경부
  4. 한국해양공학회지 v.15 no.2 평행해법을 이용한 트렁크 리드의 단면해석과 3차원 형상합성 정동원
  5. 한국과학기술원 석사학위논문 단위체 격자 재구성법과 전문가 시스템을 이용한 2차원 냉간 단조의 유한 요소 시스템 윤희도
  6. Int. J. Mach. Tool Des. Res. v.18 Upsetting of cylindrical billets between flat platens having unequal frictional properties Hashmi, M.S.J. https://doi.org/10.1016/0020-7357(78)90022-7
  7. Int. J. Mech. Sci. v.7 Upper-bound solutions to axisymmetric compression and extrusion problems Kobayashi, S.;Thomson, E.G. https://doi.org/10.1016/0020-7403(65)90071-8
  8. J. Engng Ind. v.21 Upper-bound solutions of some axisymmertic cold forging problems Liu, J.Y.
  9. Int. J. Mach. Tools Manufact. v.31 no.3 Analysis of upset forging of cylindrical billets considering the dissimilar frictional conditions at two flat die surfaces Yang, D.Y.;Choi, Y.;Kim, J.H. https://doi.org/10.1016/0890-6955(91)90084-G