• Journal of the Korea Society for Simulation
• /
• v.27 no.2
• /
• pp.49-59
• /
• 2018

The simulation-based weapon system effectiveness analysis is to support the decision making in the acquisition process of the defense domain. The effectiveness of the weapon system is a complexly influenced indicator from various factors such as environment, doctrine and so on. And the measurement of effectiveness can be defined differently in compliance with major issues in the weapon system. Because of this, the weapon system effectiveness analysis requires the comparative experiment of various alternatives based on the underlying assumption. This paper presents the efficient approach to reconfigure the simulation using the reflection technique. The proposed method contains the recoupling and resetting the simulation entity using DEVS(Discrete EVent System specification) formalism-based dynamic plug-in method. With the proposed method, this paper designs the effectiveness analysis environment that can efficiently handle the various alternatives of the weapon system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.767-773
• /
• 2014

The carrier-to-noise power ratio is a key parameter for determining the reliability of PVT (Position, Velocity, and Time) solutions which are obtained by a GNSS (Global Navigation Satellite System) receiver. It is also used for locking a tracking loop, deciding the re-acquisition process, and processing advanced navigation in the receiver subsystem. The representative carrier-to-noise power ratio estimation schemes are the narrowband-wideband power ratio method (NW), the MM (Moment Method), and Beaulieu's method (BL). The NW scheme is the most classical one for commercial GNSS receivers. It is often used as an authoritative benchmark for assessing carrier-to-noise power estimation schemes. The MM scheme is the least biased solution among them, and the BL scheme is a simpler scheme than the MM scheme. This paper focuses on the less biased estimation with low complexity when the residual phase noise remains, then proposes a novel carrier-to-noise power ratio estimation scheme with low complexity for GNSS receivers. The asymptotic bias of the proposed scheme is derived and compared with others, and the simulation results demonstrate that the complexity of the proposed scheme is lowest among them, while the estimation performance of the proposed scheme is similar to those of the BL and MM schemes in normal and high gained reception environments.

• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.179-188
• /
• 2018

In developing avionics systems, safety analysis and evaluation specified in SAE ARP4761 (Methods and Guidelines for Civil Aviation System and Equipment Safety Assessment Process) are carried out to prevent air accidents. Safety analysis requires knowledge of the abnormal state of the system, not its normal state, and its interrelationships with other standards. Therefore, a tool that automatically outputs data which proves compliance with safety certification standards is required. In this study,In this study, Schematized the safety analysis procedure of the specification and studied the method of applying the safety analysis CAD tools to individual procedure. As an example study, ARP4761 analysis was performed on the wheel brake system (WBS) of the ARP4761 appendix.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.5
• /
• pp.381-387
• /
• 2017

Fiber-reinforced composites not only have a direction of thermal expansion coefficient, but also inevitably suffer thermal stress effects due to the difference between the manufacturing process temperature and the actual use temperature. The damage caused by thermal stress is more prominent in the case of thick composite laminates, which are increasingly applied in the aerospace industry, and have a great influence on the mechanical function and fracture strength of the laminates. In this study, the dimensional reduction and thermal stress recovery theory of composite beam structure having high slenderness ratio is introduced and show the efficiency and accuracy of the thermal stress comparison results between the 3-D finite element model and the dimension reduction beam model. Efficient recovery analysis study will be introduced by reconstructing the thermal stress of the composite beam section applied to the thermal environment by constructing the dimensional reduction modeling and recovery relations.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.656-668
• /
• 2008

When it comes to design and acquire underwater vehicles such as a submarine and a torpedo according to the process of SBA(Simulation Based Acquisition)/SBD(Simulation Based Design), it is necessary to predict the performance of interest precisely and to perform the test over and over again using the M&S(Modeling and Simulation) of the engineering and the engagement level. In this paper, we research the DEVS(Discrete Event System Specification) and DTSS(Discrete Time System Specification) formalism based standard model architecture for the underwater vehicle which can support both the heterogeneous level of the M&S(Engineering/Engagement) and the different system of the M&S(Discrete Event System and Discrete Time System). To validate this standard modeling architecture, we apply it to the submarine normal diving simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.592-598
• /
• 2017

The purpose of this study is to suggest a new inspection period of ${\triangle}{\triangle}$ guided missiles by analyzing their reliability using field data. The ${\triangle}{\triangle}$ guided missile has an inspection period of five years which was determined using prediction data during its development process. However, from the analysis of its field data, it was shown that the inspection period could be extended to more than 18 years. Based on this result, a policy is proposed to reevaluate the inspection period by means of practical reliability tests.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.1
• /
• pp.135-146
• /
• 2021

VMP(Variable Message Protocol) is bit-based variable message processing protocol that enables the sharing situation information in real time as a tactical datalink protocol for Korean Army. System A is currently under development and will be operated as an army system when its development is completed. In system A, the VMP processing terminal is mounted and the VMP is utilized for exchanging tactical information. System A can acquire situation information from mounted situation information acquisition system and share situation information with other system A by the VMP. In this paper, we propose a method of sharing situation information with system A and speed improvement methods of sharing situation information using VMP. As speed improvement methods of sharing situation information, this paper studied 'Removing Process of Sending VMP Observation Report', 'Adopting One-time Situation Information Send Button When Sharing A System Situation Information By VMP', 'Combination of Many VMP Messages Using Repeat Function Of Application Header'. And we conducted the experiment, the result was that the transmission speed of equipment to which the research method was applied was improved by 76.8% compared to the existing equipment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.545-554
• /
• 2019

This research aims to provide a building area extraction approach over the areas where data acquisition is impossible through field surveying, aerial photography and lidar scanning. Hence, high-resolution satellite images, which have high accessibility over the earth, are utilized for the automated building extraction in this study. 3D point clouds or DSM (Digital Surface Models), derived from the stereo image matching process, provides low quality of building area extraction due to their high level of noises and holes. In this regards, this research proposes a hybrid building area extraction approach which utilizes 3D point clouds (from image matching), and color and linear information (from imagery). First of all, ground and non-ground points are separated from 3D point clouds; then, the initial building hypothesis is extracted from the non-ground points. Secondly, color based building hypothesis is produced by considering the overlapping between the initial building hypothesis and the color segmentation result. Afterwards, line detection and space partitioning results are utilized to acquire the final building areas. The proposed approach shows 98.44% of correctness, 95.05% of completeness, and 1.05m of positional accuracy. Moreover, we see the possibility that the irregular shapes of building areas can be extracted through the proposed approach.

• Journal of the Korean Society for information Management
• /
• v.27 no.4
• /
• pp.33-47
• /
• 2010

The growth of IT technology and the popularity of network based information sharing increase the number of digital contents in military area. Thus, there arise issues of finding suitable public information with the growing number of long-term preservation of digital public information. According to the source of raw data and the time of compilation may be variable and there can be existed in many correlations about digital contents. The business service ontology makes knowledge explicit and allows for knowledge sharing among information provider and information consumer for public digital archive engaged in improving the searching ability of digital public information. The business service ontology is at the interface as a bridge between information provider and information consumer. However, according to the difficulty of semantic knowledge extraction for the business process analysis, it is hard to realize the automation of constructing business service ontology for mapping from unformed activities to a unit of business service. To solve the problem, we propose a new business service auto-acquisition method for the first step of constructing a business service ontology based on Enterprise Architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.470-478
• /
• 2019

As the growth of the domestic defense industry is remarkable regarding technology level and export size, technology protection is necessary. Particularly, there is a need to apply anti-tamper measures to prevent critical technologies from illegally being taken out of weapon systems. However, there is no security protection strategy and system built yet in ROK. Precedent studies discussed the trend analysis and technical research for specific protective techniques, and the application of anti-tamper using limited procedures was provided. Recently, methods of how to select the technology for protection were studied based on risk management. Nonetheless, these studies cannot be associated with the acquisition process for the whole life-cycle, having difficulty with actual development and evaluation of the weapon systems. The objective of our study is to derive the system requirements of the weapon system for which anti-tamper measures have been determined to apply. Specifically, requirements items suitable for the development of anti-tamper weapon systems were derived based on ISO/IEC 19790, the CMVP standard for the development and verification of cryptographic modules. Also, its utilization in technical reviews and test & evaluations was presented. The usefulness of the research results was confirmed through inductive inference and comparative evaluation. The result can be expected to play a role in initiating extensive activities needed for technology protection of the weapon systems.