지하에 매설된 가스배관에 발생한 결함 유무를 판별하는 방법으로는 자기누설 신호를 탐지하는 비파괴검사 기법이 사용되어져 왔다. 지하 매설된 배관은 높은 가스 운용압력과 습기와 같은 외부환경에 노출되어 있어 금속부식과 같은 결함들이 군집하여 발생한다. 군집 결함들에 의해 발생한 자기누설 신호는 단일결함 신호와 비교하여 왜곡된 형태를 가지며, 왜곡된 결함 신호의 분포는 최종적으로 결함의 형상 추정을 어렵게 한다. 본 논문에서는 30인치 직경의 배관을 기준으로 다중 결함의 배치 형태와 거리를 달리하며 신호 패턴을 분석하고, 인접한 결함의 분리 가능 여부와 신호 보정을 고려한 개선된 결함 판정 알고리즘을 제안하였다.
나노-시멘트 복합체는 나노재료 분산 불량 및 제작과정 불량으로 인하여 내부에 결함이 발생할 수 있다. 이러한 내부 결함은 나노-시멘트 복합체에 치명적인 문제를 야기할 수 있으나 국내외에서의 나노-시멘트 복합체 내부의 결함 크기에 따른 비파괴 분석 관련 연구는 미비한 실정이다. 본 연구는 초음파와 전기저항을 활용하여 나노-시멘트 복합체의 비파괴 분석을 수행하고자 한다. 시편 내부의 결함은 다양한 크기로 구현되었으며, 시편은 양생일 및 결함 크기에 따라 초음파 비파괴 분석과 전기저항 비파괴 분석이 수행되었다. 실험 결과, 초음파 전파 속도는 결함 크기가 증가할수록 최대 11% 감소하였으며, 전기저항은 결함 크기에 따라 최대 14%까지 증가하였다. 이러한 이유로 초음파와 전기저항을 이용한 비파괴 분석을 활용하여 나노-시멘트 복합체 내부의 결함을 예측할 수 있는 것으로 판단된다.
노출콘크리트 마감공법은 1990년대 외부 입면 형식의 다양화, 시공기술의 발달, 콘크리트 품질 향상 등으로 인하여 노출콘크리트 마감공법의 적용사례가 증가하기 시작하였고 최근까지 노출콘크리트 마감공법을 사용하는 경우가 증가하는 추세이다. 이에 따라 품질향상을 위해 많은 연구가 진행되었지만 노출콘크리트 마감공법의 하자발생은 여전한 상태이다. 본 연구는 노출콘크리트 마감공법의 하자발생을 방지하고 품질을 확보하기 위한 통합관리의 필요성을 제고하기 위해 하자발생의 원인을 프로세스별로 분석하였다. 또한 사례조사와 AHP 분석을 통해 노출콘크리트 마감공법에서 발생하는 하자의 중요성을 도출하였다. 본 연구를 통해 노출콘크리트 마감공법의 발생하자가 기존의 하자의 발생 원인에 따라 한 프로세스마다 국한되어있는 관리가 아닌 프로세스 전반에 걸쳐 관리가 필요하다고 판단되며, 노출콘크리트 마감공법의 하자 방지 및 품질향상을 위한 통합관리가 요구되고 있다고 분석되었다.
입주민은 육안으로 구별이 되는 하자를 중심적으로 보며, 건설사는 공동 주택의 구조적, 기능적 문제에 영향이 가는 하자를 중심적으로 본다. 그에 따라, 건설사와 입주민은 공동주택의 하자를 기준으로 서로 다른 관점을 가지고 있다. 이를 해결하기 위해 본 연구에서는 서로 다른 하자의 관점차이로 인하여 발생하는 공동주택 하자분쟁의 쟁점과 개선 방안을 목표로 진행하였다. 먼저, 국토교통부와 법원의 서로 다른 하자판정기준 및 보수기준을 분석하였다. 과거 청구소송 하자판결 사례분석을 통하여 문제점을 도출 하였으며, 여러 건설사의 하자 데이터를 기반으로 건설사와 입주민의 관점차이를 도출 하였다. 이를 해결하기 위해 공동주택 하자 데이터베이스의 개선방안을 제안하였다.
As the quality of life improves, people want to live in more pleasant environment with beautiful trees, clean air and water. They are keenly interested in environmental issues as well as living environment of apartment which is a trademark of modern life. With this situation, the function and roles of landscaping trees have been recognized as a critical factor to improve living environment. As people have asked for more demands on those trees, it has raised more issues on the defect of trees and is required the solution to those issues. So, the purpose of this study was to survey the reasons of defects and find out those solutions. The data on defects in 1990s was referenced to the reports issued by SH Corporation in 1994 and 1997. The data on defects in 2000s are collected from March, 2006 to May 2006 based on the survey for apartments already constructed by Korea Housing Corporation. The results of the survey were shown that, in the year of 1994, landscaping trees causing high rate of defects were Acer buergerianum (92%), Pinus densiflora(85.7%), Celtis sinensis(80%), Cydonia sinensis(75%) and Diospyros kaki(66.6%), and in the year of 1997, landscaping trees causing high rate of defect were Ziziphus jujuba(100%), Cornus alba(65.2%), Diospyros kaki(60%), Thuja occidentalis(60%), and Metasequoia glyptostroboides(42%). And, in the year of 2006, landscaping trees causing high rate of defect were Sophora japonica(100%), Taxus cuspidata(80%), Magnoila quinquepeta (75%), Acer palmatum(62.5%) and Ginkgo biloba(50%). Because the reasons of defects were various according to the conditions including the climate, location, time and landscaping trees carried into the work area, we present the problems and solutions to those defects. Since the landscaping trees are living creatures, the factors of defects were various and complicated according to the site condition. So, in the period of warranty, contractor should designate the tree manger who can recognize the situation and take suitable action within timely manner.
To inspect point-defect in LCD pannel, calculate period and eliminated pattern. And then find point-defect to compare block image with each period. First processing, Founded over point defects. To reduce wrong point defect. Next, label point-defects and eliminated not surpass fixed limit-size.
In this paper, we consider the Landau-de Gennes energy functional for liquid crystals confined in a thin cylindrical domain and study defects of molecular directions in the system by applications of external fields.
승화 성장법을 적용하여 성장된 6H-SiC 결정에 대하여, KSV 이론과 성장 계면에서의 미사면(vicinal plane)상의 step 성장 양상을 근거로 하여, 성장 계면에서의 물질 흡착의 거동과 결함의 생성간의 상호 관계를 고찰하고, micropipes와 내부 결함의 생성 원인을 논하였다. micropipe와 면결함등의 결함들은 ledge 혹은 kink에 침입된 불순물에 의하여 step 성장의 진행이 방해받는 부분에 형성되었다. 따라서, SiC 결정에서 이들 결함의 생성은 SiC 결정 성장 계면에 형성되는 결정학적 step 성장면과 분자 또는 원자들의 격자 이동에 관련이 있음을 알 수 있었다.
Real defects in composite structures were detected by using laser measuring system. Four types of specimens, that is, a composite laminate, a honeycomb structure, a free-edge delamination and an adhesive joint, were used to study the applicability of ESPI and Shearography to composite structures. Thermal loading method, which can easily induce the surface deformation of specimen, was used to detect defects. Experimental results show that defects in composite structures can be easily detected by ESPI and Shearography. Moreover, it shows that ESPI and Shearography can be usefully applied to the detection of defects in various kinds of composite structures.
This study has been performed to investigate the stress distribution around defects that behave as stress concentrators. Besides, the effect of stress interaction effects on the initiation of primary cracks were also investigated by rotary bending fatigue tests which were performed with specimens drilled micro surface defects and the stress distribution was analyzed using Finite Element Method. In addition, the stress interaction effects around defects and cracks were investigated by comparing the results of experiments and F.E.M. The results obtained are summarized as follows ; 1) Area which slip and micro cracks initiated at micro surface defects is between the maximum shear stress points and this area is over than ${\pm}30^{\circ}$ from the maximum stress point along the defect edge. 2) The stress interaction effect for the small size defect is larger than that of large size defect when the interval between them is near 3) Interval which there is no shear stress interaction effect analyzed by F.E.M. is larger than that of experimental results.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.