• Journal of Chest Surgery
• /
• 제22권1호
• /
• pp.95-105
• /
• 1989

The records of 248 patients over 16 years of age who had undergone a surgical correction of a congenital cardiovascular malformation during the period of 10 years from August, 1978 to July, 1988 were reviewed. During this period, the incidence of congenital cardiovascular malformation in adult was 18.2% of 1376 total heart disease operated on and 25.5% of 986 congenital heart defects. Among them, there were 200 patients in acyanotic group and 48 patients in cyanotic group. Male versus female ratio was 1:1.28. The oldest patient was 59 years old female who had atrial septal defect. The mean age was 24.4 years old. The distribution of the lesions showed a large preponderance of atrial septal defects [37.19o] followed in frequency by ventricular septal defects [918.1%], patent ductus arteriosus [17.3%], tetralogy of Fallot [16.1%], and a variety of other complex malformations[3.2%]. In the pediatric age group, relative frequency was different from that of this adult group, showing ventricular septal defects, tetralogy of Fallot, patent ductus arteriosus and atrial septal defects in order of incidence. The hospital mortality and late mortality were 6.0% and 1.7% respectively. The causes of hospital death were low cardiac output in 10 patients, arrhythmia in 2, air embolism in 1, sepsis in 1 and respiratory failure in l. Clinical improvement upto NYHA functional class I or II postoperatively has been achieved and sustained in all patients following repair except the patients of late death and receiving reoperation. This result confirms that congenital heart defects in the adults can be corrected with a good outcome and an aggressive operative approach seems justified.

• 한국주거학회논문집
• /
• 제27권5호
• /
• pp.65-72
• /
• 2016

The purpose of the study was to investigate defect cases in residential interior design, to identify the state of defects, and to categorize types of defect and disputes. In addition, consumer appraisal to residential interior design service were analyzed. The results of this study could provide fundamental information regarding the defects and claims in residential interior design. First, we did literature review for defect disputes in architectural design and interior design. We identify the definition of defects by building life cycle, by state of construction, by activity, and by design performance. Second, we analysed interior design defects cases reported in Korea Consumer Agency & Ministry of Land, Infrastructure and Transport. A total of 49 cases of defect disputes in residential interior design from 2000 to 2015 were investigated. As a result, many defects appeared during the construction stage. A majority of defects cases fall into insulation, water-proofing/leakage work. In terms of design aspects claim, functional and aesthetic defects were claimed. Third, from Consumer Market Evaluation Indicators, raw data from 500 respondents were investigated for the housing repair and interior design. It is found that information comparability, responsiveness to consumer claim, price, and safety are important factors for consumer satisfaction in interior design.

• Composites Research
• /
• 제15권5호
• /
• pp.19-26
• /
• 2002

본 연구에서는 레이저 계측시스템을 이용하여 복합재료 구조물의 실제결함을 검출하였다. 다양한 하중을 적용하여 충격에 의한 복합재료 적층판의 층간분리, 하니컴 구조에서의 접착분리, 복합재료 적층판의 자유단 층간분리, 그리고 접착조인트 구조의 접착부위 접착부위와 같은 네 종류의 시험편을 제작하였고 ESPI와 전단 간섭계의 레이저 계측시스템으로부터 결함을 검출하였다. 열하중 방법을 통하여 시험편의 표면에 변형을 쉽게 일으켜 결함을 검출하였다. 실험결과 복합재료 구조물의 실제결함을 ESPI와 전단 간섭계로부터 쉽게 검출하였으며 더 나아가 ESPI와 전단 간섭계로부터 다양한 종류의 복합재료 구조물의 결함을 검출하는데 있어서 유용하게 이용될 것으로 사료된다.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.645-648
• /
• 2010

The structure and morphology of epitaxial layer defects in epitaxial Si wafers produced by the Czochralski method were studied using focused ion beam (FIB) milling, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Epitaxial growth was carried out in a horizontal reactor at atmospheric pressure. The p-type Si wafers were loaded into the reactor at about $800^{\circ}C$ and heated to about $1150^{\circ}C$ in $H_2$. An epitaxial layer with a thickness of $4{\mu}m$ was grown at a temperature of 1080-$1100^{\circ}C$. Octahedral void defects, the inner walls of which were covered with a 2-4 nm-thick oxide, were surrounded mainly by $\{111\}$ planes. The formation of octahedral void defects was closely related to the agglomeration of vacancies during the growth process. Cross-sectional TEM observation suggests that the carbon impurities might possibly be related to the formation of oxide defects, considering that some kinds of carbon impurities remain on the Si surface during oxidation. In addition, carbon and oxygen impurities might play a crucial role in the formation of void defects during growth of the epitaxial layer.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.225-234
• /
• 2014

Wall-thinned defects caused by accelerated corrosion due to fluid flow in the inner pipe appear in many structures of the secondary systems in nuclear power plants (NPPs) and are a major factor in degrading the integrity of pipes. Wall-thinned defects need to be managed not only when the NPP is under maintenance but also when the NPP is in normal operation. To this end, a test technique was developed in this study to detect such wall-thinned defects based on the temperature difference on the surface of a hot pipe using infrared (IR) thermography and a cooling device. Finite element analysis (FEA) was conducted to examine the tendency and experimental conditions for the cooling experiment. Based on the FEA results, the equipment was configured before the cooling experiment was conducted. The IR camera was then used to detect defects in the inner pipe of the pipe specimen that had artificially induced defects. The IR thermography developed in this study is expected to help resolve the issues related to the limitations of non-destructive inspection techniques that are currently conducted for NPP secondary systems and is expected to be very useful on the NPPs site.

• 약학회지
• /
• 제26권4호
• /
• pp.223-229
• /
• 1982

Uremia is associated with defective protein binding of weakly acidic drugs, whereas the protein binding of basic drugs tends to be normal. The exact chemical nature of compound(s) and mechanism for these changes as yet is unknown, and has not been defined. Organic solvent extraction of pooled normal human urine following hydrolysis by hydrochloric acid produced an extract, which when added to normal human serum, was capable of inducing binding defects similar to those in uremia. Binding defects were observed with the weakly acidic drugs such as nafcillin, salicylate, sulfamethoxazole and phenytoin while the binding of the basic drugs such as trimethoprim and quinidine were unaffected. The binding defects induced by the hydrolyzed urine extract could readily be corrected by same organic solvent extraction of acidified serum and the defects could be transferred to the normal human serum using the organic solvent layer at the physiologic pH (7.4). Followed by reacidification ind extraction of the binding defects induced serum with the same solvent, separated several fractions were obtained on thin-layer chromatography. One of these fractions could reinduce the binding defects and this factor(s) is apparently weakly acidic compounds and tightly bound to serum at physiologic pH, but extractable at acidic pH, and its molecular weight range is approximately 500 or less similar to those seen in uremia. These findings strongly support the hypothesis that the drug binding defect in uremia is due to the accumulation of endogenous metabolic products which arc normally excreted by the kidneys but accumulate in renal failure.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.93-101
• /
• 2009

Recently, public interest in housing defects, such as construction errors, occupiers' complaints, faults in production, and so on, is increasing. In addition, the construction requirements of high-rise residential buildings have increased, due to the higher prices of urban areas, especially in metropolitan areas. While previous research has focused on the defects occurring in apartment housing complexes, research has not been carried out on the defects occurring in high-rise residential buildings. In this paper, the defects patterns and characteristics of high-rise residential buildings are examined and analyzed and a defect management plan is then suggested. In order to do this, we collected the defects data of high-rise residential buildings recorded by 2,299 of 2,327 occupants. The defect occurrence rate (DOR) in the residential area is 98.8%. The frequency rate of defect occurrence over the total defect occurrence since building completion is 63.28% during the first year, 24.63% (second year), 6.88% (third year), 2.27% (fourth year), and 2.53% (fifth year). The result of correlation analysis between work types showed that there is a relationship between the built-in furniture and electronics (F&E) and painting works, and the F&E and masonry works, such as marble finishing. We expect that this research will assist in the efforts to decrease the number of defects in high-rise buildings.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.145-146
• /
• 2019

In contemporary residential culture, apartment houses can form individual independent residential areas within narrow territory. By using various building materials compared to the past, apartment house is recognized as an aesthetic space by modern people. However, as the number of cases of tile defects in apartment complexes has surged recently, aesthetic factors and quality of life have been reduced, and hundreds of millions of defects have been charged to builders every year. The tile defects in the apartment complexes of 90 domestic complexes are cracked, lifted, damaged, and dropped off. Most of the tile defects are caused by poor construction, but the defect occurrence rate due to thermal stress mechanism is high. Therefore, this paper investigates the case of tile defects in apartment house and identifies the defects and examines the problems that should be improved to reduce the defects of tiles in the building interior.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.45-51
• /
• 2012

Multilayer co-extrusion blown film construction is a popular technique for producing plastic films for various packaging industries. Automated detection of defective films can improve the quality of film production process. In this paper, we propose a film inspection system that can detect and classify film defects robustly. In our system, first, film images are acquired through a high speed line-scan camera under an appropriate lighting system. In order to detect and classify film defects, an inspection algorithm is developed. The algorithm divides the typical film defects into two groups: intensity-based and texture-based. Intensity-based defects are classified based on geometric features. Whereas, to classify texture-based defects, a texture analysis technique based on local binary pattern (LBP) is adopted. Experimental results revealed that our film inspection system is effective in detecting and classifying defects for the multilayer co-extrusion blown film construction line.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권1호
• /
• pp.71-78
• /
• 2007

The nasolabial flap has been used for reconstruction of moderate size intraoral defects. The nasolabial fold area provides an ample supply of tissue with a good color and texture match. The nasolabial flap classified advancement flap, inferiorly-based flap, superiorly-based flap. The flap is based inferiorly, so that it can easily be rotated to the intraoral defects. The nasolabial flap is chosen for the repair of various intraoral defects because of its simple elevation, proximity to the defect and its rich subcutaneous blood supply of a island flap. The subjects were 6 patients with nasolabial flap, who had reconstruction of moderate size intraoral defects. We have found the inferiorly-based nasolabial flap with a subcutaneous pedicle useful in the primary repair of surgical defects of the buccal mucosa, edentulous mandibular ridge, maxillary alveolus area and soft palate in these patients. There was no complication except one case. Intraoral hair growth was a minor problem of this patient. We thought that the inferiorly-based nasolabial flap is a useful technique for reconstruction of various intraoral defects.