• 한국건설관리학회논문집
• /
• 제20권4호
• /
• pp.46-55
• /
• 2019

노출콘크리트 마감공법은 1990년대 외부 입면 형식의 다양화, 시공기술의 발달, 콘크리트 품질 향상 등으로 인하여 노출콘크리트 마감공법의 적용사례가 증가하기 시작하였고 최근까지 노출콘크리트 마감공법을 사용하는 경우가 증가하는 추세이다. 이에 따라 품질향상을 위해 많은 연구가 진행되었지만 노출콘크리트 마감공법의 하자발생은 여전한 상태이다. 본 연구는 노출콘크리트 마감공법의 하자발생을 방지하고 품질을 확보하기 위한 통합관리의 필요성을 제고하기 위해 하자발생의 원인을 프로세스별로 분석하였다. 또한 사례조사와 AHP 분석을 통해 노출콘크리트 마감공법에서 발생하는 하자의 중요성을 도출하였다. 본 연구를 통해 노출콘크리트 마감공법의 발생하자가 기존의 하자의 발생 원인에 따라 한 프로세스마다 국한되어있는 관리가 아닌 프로세스 전반에 걸쳐 관리가 필요하다고 판단되며, 노출콘크리트 마감공법의 하자 방지 및 품질향상을 위한 통합관리가 요구되고 있다고 분석되었다.

• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.103-114
• /
• 2022

입주민은 육안으로 구별이 되는 하자를 중심적으로 보며, 건설사는 공동 주택의 구조적, 기능적 문제에 영향이 가는 하자를 중심적으로 본다. 그에 따라, 건설사와 입주민은 공동주택의 하자를 기준으로 서로 다른 관점을 가지고 있다. 이를 해결하기 위해 본 연구에서는 서로 다른 하자의 관점차이로 인하여 발생하는 공동주택 하자분쟁의 쟁점과 개선 방안을 목표로 진행하였다. 먼저, 국토교통부와 법원의 서로 다른 하자판정기준 및 보수기준을 분석하였다. 과거 청구소송 하자판결 사례분석을 통하여 문제점을 도출 하였으며, 여러 건설사의 하자 데이터를 기반으로 건설사와 입주민의 관점차이를 도출 하였다. 이를 해결하기 위해 공동주택 하자 데이터베이스의 개선방안을 제안하였다.

• 현장농수산연구지
• /
• 제10권1호
• /
• pp.101-111
• /
• 2008

As the quality of life improves, people want to live in more pleasant environment with beautiful trees, clean air and water. They are keenly interested in environmental issues as well as living environment of apartment which is a trademark of modern life. With this situation, the function and roles of landscaping trees have been recognized as a critical factor to improve living environment. As people have asked for more demands on those trees, it has raised more issues on the defect of trees and is required the solution to those issues. So, the purpose of this study was to survey the reasons of defects and find out those solutions. The data on defects in 1990s was referenced to the reports issued by SH Corporation in 1994 and 1997. The data on defects in 2000s are collected from March, 2006 to May 2006 based on the survey for apartments already constructed by Korea Housing Corporation. The results of the survey were shown that, in the year of 1994, landscaping trees causing high rate of defects were Acer buergerianum (92%), Pinus densiflora(85.7%), Celtis sinensis(80%), Cydonia sinensis(75%) and Diospyros kaki(66.6%), and in the year of 1997, landscaping trees causing high rate of defect were Ziziphus jujuba(100%), Cornus alba(65.2%), Diospyros kaki(60%), Thuja occidentalis(60%), and Metasequoia glyptostroboides(42%). And, in the year of 2006, landscaping trees causing high rate of defect were Sophora japonica(100%), Taxus cuspidata(80%), Magnoila quinquepeta (75%), Acer palmatum(62.5%) and Ginkgo biloba(50%). Because the reasons of defects were various according to the conditions including the climate, location, time and landscaping trees carried into the work area, we present the problems and solutions to those defects. Since the landscaping trees are living creatures, the factors of defects were various and complicated according to the site condition. So, in the period of warranty, contractor should designate the tree manger who can recognize the situation and take suitable action within timely manner.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.351-354
• /
• 2003

To inspect point-defect in LCD pannel, calculate period and eliminated pattern. And then find point-defect to compare block image with each period. First processing, Founded over point defects. To reduce wrong point defect. Next, label point-defects and eliminated not surpass fixed limit-size.

• 충청수학회지
• /
• 제36권1호
• /
• pp.25-37
• /
• 2023

In this paper, we consider the Landau-de Gennes energy functional for liquid crystals confined in a thin cylindrical domain and study defects of molecular directions in the system by applications of external fields.

• 한국결정성장학회지
• /
• 제9권6호
• /
• pp.558-562
• /
• 1999

승화 성장법을 적용하여 성장된 6H-SiC 결정에 대하여, KSV 이론과 성장 계면에서의 미사면(vicinal plane)상의 step 성장 양상을 근거로 하여, 성장 계면에서의 물질 흡착의 거동과 결함의 생성간의 상호 관계를 고찰하고, micropipes와 내부 결함의 생성 원인을 논하였다. micropipe와 면결함등의 결함들은 ledge 혹은 kink에 침입된 불순물에 의하여 step 성장의 진행이 방해받는 부분에 형성되었다. 따라서, SiC 결정에서 이들 결함의 생성은 SiC 결정 성장 계면에 형성되는 결정학적 step 성장면과 분자 또는 원자들의 격자 이동에 관련이 있음을 알 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.35-38
• /
• 2002

Real defects in composite structures were detected by using laser measuring system. Four types of specimens, that is, a composite laminate, a honeycomb structure, a free-edge delamination and an adhesive joint, were used to study the applicability of ESPI and Shearography to composite structures. Thermal loading method, which can easily induce the surface deformation of specimen, was used to detect defects. Experimental results show that defects in composite structures can be easily detected by ESPI and Shearography. Moreover, it shows that ESPI and Shearography can be usefully applied to the detection of defects in various kinds of composite structures.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.25-32
• /
• 1999

This study has been performed to investigate the stress distribution around defects that behave as stress concentrators. Besides, the effect of stress interaction effects on the initiation of primary cracks were also investigated by rotary bending fatigue tests which were performed with specimens drilled micro surface defects and the stress distribution was analyzed using Finite Element Method. In addition, the stress interaction effects around defects and cracks were investigated by comparing the results of experiments and F.E.M. The results obtained are summarized as follows ; 1) Area which slip and micro cracks initiated at micro surface defects is between the maximum shear stress points and this area is over than ${\pm}30^{\circ}$ from the maximum stress point along the defect edge. 2) The stress interaction effect for the small size defect is larger than that of large size defect when the interval between them is near 3) Interval which there is no shear stress interaction effect analyzed by F.E.M. is larger than that of experimental results.

• 한국항해학회지
• /
• 제20권1호
• /
• pp.81-85
• /
• 1996

The defects occurred in knitted fabrics have several types due to some trouble sources. In particular, the defects caused by knitting machine troubles give a serious damage to the whole webs. It is, therefore, necessary to discriminate the kind of defects. The method to discriminate the type and size of defects has been proposed, which is used a pair of narrow band eliminating spatial filters. This method is based upon an isotropic signal processing in time domain. This paper is to confirm that the proposed method can be useful in the discrimination of defects, having analyzed in spatial frequency domain.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.86-89
• /
• 2000

In cold forging by multi stage former, crowing process is important process for the high production rate and automation of forging process. But various cropping defects occur in cropping process such as orthogonality, ovality and unevenness, etc. These defects have harmful effects on the dimensional tolerance of products and tool life. So in this study, the cropping experiment is performed to examine influence of cropping process variables(clearance, cutting velocity, H/D) on occurrence of crowing defects and optimum process variables are selected, and then FE analysis is performed to verify influence of these defects on dimensional tolerance and tool life.