• 한국해양공학회지
• /
• 제36권1호
• /
• pp.11-20
• /
• 2022

Generally, tsunamis are generated by the rapid crustal movements of the ocean floor. Other factors of tsunami generation include landslides on coastal and ocean floor slopes, glacier collapses, and meteorite collisions. In this study, two numerical analyses were conducted to examine the formation, propagation, and deformation properties of landslide tsunamis. First, LS-DYNA was adopted to simulate the formation and propagation processes of tsunamis generated by dropping rigid bodies. The generated tsunamis had smaller wave heights and wider waveforms during their propagation, and their waveforms and flow velocities resembled those of theoretical solitary waves after a certain distance. Second, after the formation of the landslide tsunami, a tsunami based on the solitary wave approximation theory was generated in a numerical wave tank (NWT) with a computational domain that considered the stability/steady phase. The comparison of two numerical analysis results over a certain distance indicated that the waveform and flow velocity were approximately equal, and the maximum wave pressures acting on the upright wall also exhibited similar distributions. Therefore, an effective numerical model such as LS-DYNA was necessary to analyze the formation and initial deformations of the landslide tsunami, while an NWT with the wave generation method based on the solitary wave approximation theory was sufficient above a certain distance.

• Advances in Computational Design
• /
• 제8권3호
• /
• pp.219-236
• /
• 2023

In this paper, finite element modeling of the laser ultrasonics (LU) process in ablation regime is of interest. The momentum resulting from the removal of material from the specimen surface by the laser beam radiation in ablation regime is modeled as a pressure pulse. To model this pressure pulse, two equations are required: one for the spatial distribution and one for the temporal distribution of the pulse. Previous researchers have proposed various equations for the spatial and temporal distributions of the pressure pulse in different laser applications. All available equations are examined and the best combination of the temporal and spatial distributions of the pressure pulse that provides the most accurate results is identified. This combination of temporal and spatial distributions has never been used for modeling laser ultrasonics before. Then by using this new model, the effects of variations in pulse duration and laser spot radius on the shape, amplitude, and frequency spectrum of ultrasonic waves are studied. Furthermore, the LU in thermoelastic regime is simulated by this model and compared with LU in ablation regime. The interaction of ultrasonic waves with a defect is also investigated in the LU process in ablation regime. Good agreement of the results obtained from the new finite element model and available experimental data confirms the accuracy of the proposed model.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1490-1500
• /
• 2024

Helium-induced defect nucleation and accumulation in polycrystalline W and W0.5 wt%ZrC (W0.5ZrC) were studied in-situ using the transmission electron microscopy (TEM) combined with 40 keV He⁺ irradiation at 800 and 1000℃ at the maximum damage level of 1 dpa. Radiation-induced dislocation loops were not observed in the current study. W0.5ZrC was found to be less susceptible to irradiation damage in terms of helium bubble formation and growth, especially at lower temperature (800 ℃) when vacancies were less mobile. The ZrC particles present in the W matrix pin the forming helium bubbles via interaction between C atom and neighbouring W atom at vacancies. This reduces the capability of helium to trap a vacancy which is required to form the bubble core and, as a consequence, delays, the bubble nucleation. At 1000 ℃, significant bubble growth occurred in both materials and all the present bubbles transitioned from spherical to faceted shape, whereas at 800 ℃, the faceted helium bubble population was dominated in W.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권7호
• /
• pp.937-945
• /
• 2010

This study aimed to investigate the effects of dietary zinc (Zn), environmental temperatures and Zn${\times}$temperature interaction on growth, feathering score and mineral composition of broilers. A total of 256 d-old Avian male broiler chicks were randomly allocated to a $4{\times}2$ factorial arrangement with four corn-soybean meal basal diets (containing 44 mg Zn/kg) supplemented with 0, 40, 60 mg/kg Zn (Diets 1, 2 and 3, respectively; 0.8% Ca for these three diets) and non-Zn supplementation, 1.6% Ca (Diet 4) and two temperature conditions (low: 26, 24, $22^{\circ}C$ vs. high: 30, 28, $26^{\circ}C$). All birds were given feathering coverage scores for back, breast, wing, under-wing and tail. The wing and tail were further evaluated for the occurrence and severity of defect feathers. Feathers were then pooled for mineral composition analysis. The results showed that in high temperature conditions, broilers fed Zn-unsupplemented, 0.8% Ca ration (Diet 1) had significantly (p<0.05) lower ADFI and ADG (wk 1-6) than birds under low temperature conditions. However, when the birds were fed 40 and 60 mg/kg Zn supplementation (Diets 2 and 3), the ADFI and ADG in both temperature conditions were not significantly different. In low temperature conditions, the ADFI, ADG (p<0.05), all feather coverage (p<0.01) and tail defect scores (p<0.001) of birds fed Diet 4 (excess Ca) were significantly poorer than those fed Diet 1. More Ca (p<0.05) was retained in the feathers of broilers fed Diet 4 under high temperature conditions. Broilers fed the Zn-unsupplemented ration (Diet 1) had significantly higher feather phosphorus (p<0.01) and potassium (p<0.05) concentrations than those fed the 60 mg/kg Zn-supplemented ration (Diet 3). A reduction of feather phosphorus (p<0.01) and potassium (p<0.05) and higher manganese (p<0.05) concentrations were observed in Diet 4 broilers as compared to those fed Diet 1. Under high temperature conditions, broilers had lower iron (p<0.05) and higher manganese (p<0.05) concentrations in feathers. Broilers kept in high temperature conditions had a higher Zn requirement and 40 mg/kg Zn supplementation was sufficient for the birds to achieve optimum growth. Supplemental Zn ameliorated the adverse effect of high temperature on growth and occurrence of tail feather defects. Excess Ca disrupted Zn metabolism to exert a detrimental effect on growth performance and normal feathering and this was elucidated in the birds kept in low temperature conditions.

• 한국자기학회지
• /
• 제17권1호
• /
• pp.14-17
• /
• 2007

고상 반응법을 써서 전이금속(Cr, Ti)을 치환한 란탄칼슘망간산화물, $La_{0.5}Ca_{0.5}(Mn_{0.98}TM_{0.02})O_3$의 자성특성을 연구하였다. 자성 특성은 VSM을 써서 측정하였고, 50 Oe에서 zero field cooling과 field cooling을 하면서, 자화-온도측정을 Cr과 Ti 치환한 경우에 측정하였다. $La_{0.5}Ca_{0.5}(Mn_{0.98}Cr_{0.02})O_3$는 클러스터 또는 스핀유리와 유사한 거동을 보였으며, $La_{0.5}Ca_{0.5}(Mn_{0.98}Ti_{0.02})O_3$에서는 관찰되지 않았다. 큐리온도는 전이금속이 치환된 시편의 경우 란탄칼슘망간산화물 $La_{0.5}Ca_{0.5}MnO_3$의 큐리온도 245.5K에서 감소한, 235.5 K [$La_{0.5}Ca_{0.5}(Mn_{0.98}Cr_{0.02})O_3$], 232.7 K [$La_{0.5}Ca_{0.5}(Mn_{0.98}Ti_{0.02})O_3$]로 모두 감소하였다. 자벽 고정(domain wall pinning)을 알아보기 위해 온도에 따른 보자력 측정을 하였고, 이 결과를 defect와 자벽 간의 상호작용의 관점으로 해석하였다.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2006

졸-겔 방법을 이용하여 Fe첨가된 CuO박막 및 파우더 시료들을 제작하여 그 구조적, 전기적, 자기적 특성들을 순수한 CuO에서와 비교 분석하였다 순수한 CuO 박막은 monoclinic 구조를 가지며 상온에서 Cu 결핍으로 인한 p-type 전기전도성$(\~10^{-2}\;{\Omega^{-1}\;cm^{-1}$을 나타내었다 반면에 CuO:Fe박막은 부도체 성질을 나타내었고, 소량의 Li첨가에 의하여 p-type전도성 및 상온 강자성(ferromagnetism)을 나타내었다. 이와 같은 CuO: Fe, Li박막에서 나타난 결과는 $Li^+$ 이온의 $Cu^{2+}$ 자리 치환으로 인한 hole생성으로 전도성이 증대됨과 동시에 그 defect상태를 매개로 한 $Fe^{3+}$ 이온들간의 원거리 상호작용(long-range interaction)에 의한 강자성 효과의 증대에 기인한 것으로 해석된다. CuO: Fe파우더의 경우 박막에서와 비교하여 증대된 강자성을 나타내는데, 후열처리 온도의 증가가 자기 모멘트의 증대에 기여하였다. 뫼스바우어 측정을 통하여 CuO: Fe박막 및 파우더에서 주로 $Fe^{3+}$ 이온이 팔면체 $Cu^{2+}$ 자리를 치환하였음을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제24권2호
• /
• pp.141-153
• /
• 1992

상온핵융합의 실험적 검증을 위하여 가공조건 및 기하학적조건이 다른 7종류의 팔라디움전극을 사용하여 24~28시간, 전류밀도 83~600 mA/$\textrm{cm}^2$의 조건하에 전기분해를 실시하였다. 상기조건 하에서 삼중수소의 농축에 기인한 분리팩타(separation factor)를 측정하였고 핵융합의 부산물일수도 있는 삼중수소 증가량을 측정하였다. 또한 초과열 계 산과 관련된 K(net Faradic efficiency)를 측정하여 산소/중수소 가스의 재결합정도를 조사하였다. 양전자소멸측정장치 및 일정체적 가스주입장치를 이용하여 팔라디움전극에서 격자결함과 수소의 반응 및 거동에 대하여 조사하였다. 전기분해하는 동안 삼중수소 농축현상이 관찰되었으나 핵융합의 증거가 될만한 삼중수소양은 검출되지 않았다. 한편 산소/수소 가스의 재결합 정도는 32%로 나타났다. 이는 재결합과정이 발열반응이므로 전기분해과정에서 핵반응과 관계없이 초과엔탈피가 발생할 수 있음을 의미한다. 양전자소멸측정장치를 이용하여 양전자수명, 양전자소멸밀도, P/W 및 R 파라메터의 측정을 통하여 전극의 격자결함(전위 및 공공)에 수소가 집적 (trap)되며 수소집적은 공공에서 보다 전위에 약간 더 선호하는 것으로 나타났다. 전극의 수소화물형성에 수반하여 대부분 전위가 발생한 것으로 나타났다. 또한 팔라디움수소화물의 등시소둔실험을 통하여 소량의 미소공동 형태의 결함이 존재하는 것으로 추정하였고 그 결함의 크기는 수 $\AA$정도인 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.195-199
• /
• 2003

The $p-CdIn_2$$Te_4$single crystal was grown in the three-stage vertical electric furnace by using Bridgman method. The quality of the grown crystal has been investigated by the x-ray diffraction and the photoluminescence measurements. From the photoluminescence spectra of the as-grown $CdIn_2$$Te_4$crystal and the various heat-treated crystals, the ($D^{\circ}$, X) emission was found to be the dominant intensity in the photoluminescence spectrum of the $CdIn_2$T $e_4$:Cd, while the ($A^{\circ}$, X) emission completely disappeared in the $CdIn_2$T $e_4$:Cd. However, the ($A^{\circ}$, X) emission in the photoluminescence spectrum of the $CdIn_2$T $e_4$:Te was the dominant intensity like an as-grown $CdIn_2$T $e_4$crystal. These results indicated that the ($D^{\circ}$, X) is associated with $V_{Te}$ acted as donor and that the ($A^{\circ}$, X) emission is related to $V_{cd}$ acted as acceptor, respectively. The $p-CdIn_2$T $e_4$crystal was found to be obviously converted into the n-type after annealing in the Cd atmosphere. The origin of ( $D^{\circ}$, $A^{\circ}$) emission and its TO phonon replicas is related to the interaction between donors such as $V_{Te}$ or $Cd_{int}$, and accepters such as $V_{cd}$ or T $e_{int}$. Also, the In in the $CdIn_2$X$CdIn_4$was confirmed not to form the native defects because it existed in the stable form of bonds.

• 한국잠사곤충학회지
• /
• 제4권
• /
• pp.63-68
• /
• 1965

본 연구는 견사 lousiness와 유전관련성을 구명하여 도태가능성 여부를 조사하는 반면, 그 외 도태가능성이 불완전하였으므로 정련방법의 개량으로 인하여 lousiness의 개선을 기도하였던 바 얻어진 결론은 다음과 같았다. (A) lousiness의 유전관계문제 1. 교잡에 의한 lousiness 감소는 11.0%이었다. 2. lousiness의 유전은 불완전우성으로 유전한다. 3. lousiness를 발생하는 유전은 누적적으로 작용하고2종 이상의 유전자가 lousiness 발생에 작용하는 것으로 고찰된다. 4. 잠견의 실용형질과 lousiness와는 유전상관관계가 없다. 5. 다계량계통의 잠품종에서 반드시 lousiness의 발생이 많다고 할 수 없다. 6. 본 실험에서의 lousiness 검경은 생계의 exforiation 시험결과와 동일하였다. (B) 정련에 의한 lousiness 개선문제 1. 양 ion계 화학연화제 0.2% 용액을 95$^{\circ}C$ 하에서 30분간 처리할 때 lousiness 발생을 억제하면서 정련할 수 있었다. 2. 음 ion계 화학연화제는 생사정련에 불합격하였다. 3. 양 ion계 연화제를 상기조건하에 처리할 때 견사의 물리적성질에 변화가 없었다. 4. 석검정련은 lousiness 발생을 용이하게 시킨다.