• Korean Journal of Metals and Materials
• /
• v.48 no.7
• /
• pp.667-673
• /
• 2010

Copper filling into TSV (through-silicon-via) and reduction of the filling time for the three dimensional chip stacking were investigated in this study. A Si wafer with straight vias - $30\;{\mu}m$ in diameter and $60\;{\mu}m$ in depth with $200\;{\mu}m$ pitch - where the vias were drilled by DRIE (Deep Reactive Ion Etching) process, was prepared as a substrate. $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to reduce the time required complete the Cu filling into the TSV, the PPR (periodic pulse reverse) wave current was applied to the cathode of a Si chip during electroplating, and the PR (pulse-reverse) wave current was also applied for a comparison. The experimental results showed 100% filling rate into the TSV in one hour was achieved by the PPR electroplating process. At the interface between the Cu filling and Ti/ Au functional layers, no defect, such as a void, was found. Meanwhile, the electroplating by the PR current showed maximum 43% filling ratio into the TSV in an hour. The applied PPR wave form was confirmed to be effective to fill the TSV in a short time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.404-407
• /
• 2014

Delay Tolerant Network (DTN) is a networking architecture that is designed to solve network problem in unstable and stressed environments using the Store-Carry-Forward method. Different form general networks, DTN does not guarantee the end-to-end connectivity, it is hard for the exiting TCP/IP based protocols to normally work due to the characteristic such as large latency and unstable link connectivity. And the condition that send massage without the information of the destination occurs frequently. Thus, suitable routing protocols for DTN are required and being researched. In this paper, we propose a novel routing protocol for DTN utilizing epidemic and prediction based algorithm to prevent the defect of previously DTN routing protocols such as the absence of the holistic view of the network. Proposed algorithm predicted destination using the mobility information recorded in neighbor node's history and utilize epidemic based algorithm when occurred condition without destination's information. This algorithm is enhanced in terms of delivery ratio, decreases latency and overhead in sparse network such as DTN.

• The Journal of Internal Korean Medicine
• /
• v.42 no.5
• /
• pp.939-948
• /
• 2021

Objectives: This study considered the effectiveness of Korean medicine for the treatment of eyelid edema post craniotomy. Methods: The patient was diagnosed with Taeumin-one of the four constitution types in Korean medicine-and treated with herbal medicines: Cheongsimyeunja-tang, Chungpyesagan-tang, and Hwangryunhaedok-tang pharmacoacupuncture treatment. The severity of eyelid edema was assessed using Kara and Gokalan's scale, daily imaging of the patient's eyelids, and the ratio of the length of the left eye to that of the right. Results: Following treatment, the Kara and Gokalan score decreased from 3 to 0. The changes in the ratios were 29% and 50%, respectively. The visual field defect due to edema in the left eye was also repaired. Conclusion: This study suggests that Korean medical treatment could be an effective option for treating eyelid edema following craniotomy.

• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.149-159
• /
• 2021

This study examined the effects of different wet-aging times on the physicochemical characteristics and microbial profile of longissimus lumborum (LL) and biceps femoris (BF) muscles from Korean native black goat (KNBG) meat. The water holding capacity (WHC), pH, cooking loss, shear force, meat color, free amino acid, total bacteria, and coliform count of KNGB meat were analyzed at 0, 5, 10, and 15 days of wet-aging at 4℃ under vacuum packaging. The results showed that different wet-aging times led to significant pH variations between the muscles throughout the aging period. The wet-aging time did not affect the WHC and cooking loss in meat from the LL muscle. In the BF muscle, however, meat wet-aged for five days had a significantly higher WHC and less cooking loss than meat aged for 0, 10, and 15 days. The meat from the LL muscle wet-aged for five days produced tenderer meat (low shear force value) than the unaged meat (p < 0.05). Moreover, the color was similar in the LL muscle regardless of the number of aging days. In the BF muscle, the redness (a*) was higher in the meat wet-aged for 15 days compared to that aged for 0, 5, and 10 days (p < 0.05). Regardless of the muscles, an increase in wet-aging time led to an increase in the total free amino acids contents in both muscles (p < 0.05). On the other hand, the tasty/bitter amino acid ratio was significantly higher for five days of wet-aged meat than 10 and 15 days of aging from the BF muscle. In addition, regardless of the muscles, the total bacteria and coliform counts were significantly lower for five days of wet-aged meat than 10 and 15 days of aging (p < 0.05). Therefore, chevon wet-aged for five days is an optimal aging period under vacuum packaging that fortifies meat quality with a minimal microbial negative defect.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.799-807
• /
• 2021

Objective : Cerebrospinal fluid leakage related complications (CLC) occasionally occur after intradural spinal surgery. We sought to investigate the effectiveness of early ambulation after intradural spinal surgery and analyze the risk factors for CLC. Methods : For this retrospective cohort study, we enrolled 314 patients who underwent intradural spinal surgery at a single institution. The early group contained 79 patients who started ambulation after 1 day of bedrest without position restrictions, while the late group consisted of 235 patients who started ambulation after at least 3 days of bed rest and were limited to the prone position after surgery. In the early group, Prolene 6-0 was used as the dura suture material, while black silk 5-0 was used as the dura suture material in the late group. Results : The overall incidence rate of CLC was 10.8%. Significant differences between the early and late groups were identified in the rate of CLC (2.5% vs. 13.6%), surgical repair required (1.3% vs. 7.7%), and length of hospital stay (2.99 vs. 9.29 days) (p<0.05). Logistic regression analysis revealed that CLC was associated with practices specific to the late group (p=0.011) and the revision surgery (p=0.022). Conclusion : Using Prolene 6-0 as a dura suture material for intradural spinal surgery resulted in lower CLC rates compared to black silk 5-0 sutures despite a shorter bed rest period. Our findings revealed that suture - needle ratio related to dura defect was the most critical factor for CLC. One-day ambulation after primary dura closure using Prolene 6-0 sutures appears to be a costeffective and safe strategy for intradural spinal surgery.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.732-738
• /
• 2011

Silicon oxide thin films were deposited by using a plasma-enhanced chemical-vapor deposition technique to investigate the light emission properties. The photoluminescence characteristics were divided into two categories along the relative ratio of the flow rates of $SiH_4$ and $N_2O$ source gases, which show light emission in the broad/visible range and a light emission peak at 380 nm. We attribute the broad/visible light emission and the light emission peak to the quantum confinement effect of nanocrystalline silicon and the Si=O defects, respectively. Changes in the photoluminescence spectra were observed after the post-annealing processes. The photoluminescence spectra of the broad light emission in the visible range shifted to the long wavelength and were saturated above an annealing temperature of $900^{\circ}C$ or after 1 hour annealing at $970^{\circ}C$. However, the position of the light emission peak at 380 nm did not change at all after the post-annealing processes. The light emission intensities at 380 nm initially increased, and decreased at annealing temperatures above $700^{\circ}C$ or after 1 hour annealing at $700^{\circ}C$. The photoluminescence behaviors after the annealing processes can be explained bythe size change of the nanocrystalline silicon and the density change of Si=O defect in the films, respectively. These results support the possibility of using a silicon-based light source for Si-optoelectronic integrated circuits and/or display devices.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.293-306
• /
• 2023

This study proposes and demonstrates a smart monitoring system that uses transmission lines embedded in a reinforced concrete structure to detect the presence of defects through changes in the electromagnetic waves generated and measured by a time-domain reflectometer. Laboratory experiments were first conducted to identify the presence of voids in steel-concrete composite columns. The results indicated that voids in the concrete caused a positive signal reflection, and the amplitude of this signal decreased as the water content of the soil in the void increased. Multiple voids resulted in a decrease in the amplitude of the signal reflected at each void, effectively identifying their presence despite amplitude reduction. Furthermore, the electromagnetic wave velocity increased when voids were present, decreased as the water content of the soil in the voids increased, and increased with the water-cement ratio and curing time. Field experiments were then conducted using bored piles with on-center (sound) and off-center (defective) steel-reinforcement cage alignments. The results indicated that the signal amplitude in the defective pile section, where the off-center cage was poorly covered with concrete, was greater than that in the pile sections where the cage was completely covered with concrete. The crosshole sonic logging results for the same defective bored pile failed to identify an off-center cage alignment defect. Therefore, this study demonstrates that electromagnetic waves can be a useful tool for monitoring the health and integrity of reinforced concrete structures.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.2
• /
• pp.5-15
• /
• 2009

The conventional reinforced earth retaining wall has the connector system to fix the reinforcement and block. However, this system defect may cause the crack of block and the rupture of reinforcement due to the stress concentration near the face of reinforced earth retaining wall. Hence, the new connector system which was able to allow the settlement of reinforcement was developed in this study and a test was carried out in the study area which is divided into the conventional reinforced earth retaining wall and reinforced Earth Retaining Wall driving the settlement. As the results of field monitoring in situ, the ratio of tensile force calculated at maximum value on contiguous portion of front block showed that the settlement type decreased the stress concentration near the face of front block greater than the conventional type.

• Journal of Yeungnam Medical Science
• /
• v.40 no.2
• /
• pp.187-192
• /
• 2023

Background: This study aimed to present the short- and midterm outcomes after complete atrioventricular canal defect (CAVC) repair using a single-patch technique. Methods: This study included 30 children who underwent surgical correction of the CAVC using a single-patch technique. Results: The median age of the patients was 5.7 months (interquartile range [IQR], 5.0-7.5 months), and 23 patients (76.7%) had type A CAVC. Fourteen patients (46.7%) were female and 17 (56.7%) had been diagnosed with Down syndrome. The in-hospital mortality rate was 0%. No deaths were observed during a median follow-up of 4 years (IQR, 3.5-5.0 years). Patients without Down syndrome were associated with late moderate mitral regurgitation (MR) (p=0.02). Late MR less than moderate degree was observed in 96.6%, 78.5%, and 50% of patients after 2, 4, and 5 years of follow-up, respectively, while late tricuspid valve regurgitation less than moderate degree was observed in 96.7%, 85.9%, and 59.0% of patients after 2, 4, and 6 years of follow-up, respectively. After a median follow-up of 4 years, only one patient had required surgical repair of a left ventricular outflow tract obstruction, which occurred 26 months after the first operation. Multivariable logistic regression analysis adjusted for the type of CAVC, sex, Down syndrome, age, and weight revealed that the absence of Down syndrome was a risk factor for late moderate MR (MR-2) (odds ratio, 0.05; 95% confidence interval, 0.006-0.50; p=0.01). Conclusion: A single-patch technique for CAVC surgical repair is a safe method with acceptable short- and midterm results.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.619-628
• /
• 2023

This study undertook a empirical analysis, delving into the association between the direct construction approach and the construction quality of general construction companies. The research hinged on corporate financial data to elucidate the premise that a reduced emphasis on direct construction approach by general construction companies correlates with a notable prevalence of building defects. Specifically, the analysis engaged with the top 100 construction companies based on their construction capability evaluation in 2022. This appraisal leveraged the Empirical Research Model(ERM) rooted in financial data-sets spanning 2017 to 2021. Findings underscored that as the ratio of direct construction approach diminishes, the incidence of building defects amplifies, signifying a consequential dip in construction quality. Moreover, the research reaffirmed that companies with elevated construction capability evaluations or larger organizational scales tend to register decreased defect rates. This study fortifies, from a theoretical perspective, the legislative imperatives championing direct construction approach, by empirically spotlighting the potential perils of over-reliance on subcontracting.