• 제목/요약/키워드: Decrease rate

검색결과 6,206건 처리시간 0.029초

더블딥 출산율 요인 규명과 향후 추이 (Forecast and identifying factors on a double dip fertility rate for Korea)

  • 오진호
    • 응용통계연구
    • /
    • 제32권4호
    • /
    • pp.463-483
    • /
    • 2019
  • 2000년 이후 우리나라 합계출산율은 일본, 독일, 프랑스처럼 출산율이 상승이나 감소기조에 들어서면 쉽게 변하지 않는 비가역적인 상수형태를 보이는 것과는 다른 양상을 보인다. 또한 2005년 1.08명 최저점에서 서서히 증가해 2015년 1.23명을 보이다가 2016년 1.17명, 2017년 1.05명, 2018년 0.98명으로 급락하고 있다. 이는 마치 경기침체의 더블딥(double dip)과 유사한 형태를 보인다. 본 연구는 이러한 TFR 증감 요인을 규명하기 위해 먼저 TFR에 영향력이 높은 출생아수 추이와 예측, TFR 분해법으로 분해되는 유배우율과 유배우출산율의 추이를 살펴본다. 그리고 이들 변화가 TFR 증감 변화에 어떤 영향력을 나타내는지 살펴보았다. 분석결과 출생아수는 2018년 약 32-33만 명, 2020년 30만 명, 2025년은 23-24만 명 수준을 보일 것으로 추정된다. 유배우율은 1981-2025년까지 지속적으로 감소, 유배우출산율은 2002년 이전까지 감소를 보이다가 2003-2016년 증가추세를 보인후 2017-2025년까지 감소추세로 이어질 것으로 예측되었다. 끝으로 출생아수, 출산율 분해와 통계적 모형으로 살펴본 TFR 향후 추이는 2018년 0.98명, 2020년 0.93-1.11명, 2025년에는 0.76-1.08명으로 분석되었다.

Evaluation of the Asph81t Mixture Performance with Waste Materials

  • Lee, Kwan-Ho;Lovell, C
    • 한국지반공학회지:지반
    • /
    • 제12권3호
    • /
    • pp.17-34
    • /
    • 1996
  • 본 논문의 주된 목적은 폐자원(첨가제로서 pyrolyzed carbon black과 굵을 골재로서 aircooled iron blast furnace slag)을 사용한 아스팔트 콘크리트의 기본특성을 설명하는 것이다. 최적의 아스팔트 함유량을 결정하기 위하여 Marshall Mik Design방법을 이용하였고, 최적의 아스팔트 함유량은 첨가제의 양에 따라 변하며,그 범위는 6.7%에서 7.57%로 나타났다. 최적의 아스팔트 함유량을 이용하여 아스팔트 콘크리트 시편을 제작하였고, dynamic creep 실험을 수행하였다. Pyrolyzed carbon black과 Furnace slag의 사용은 Marshall stability를 증가시켰고, 비교적 높은 온도(5$0^{\circ}C$)와 137.gkpa의 구속 압력하에서 아스팔트 콘크리트의 시간에 따른 변형률을 감소시켰고, 또한 시간에 따른 아스팔트 콘크리트의 stiffness감소 비율을 줄여주는 역할을 하였다. 본 실험결과로 부터 첨가제로서의 pyrolyzed carbon black과 굵은 골재로서의 slag의 사용은 Marshall stability, stiffness, rutting resistance에 좋은 결과를 나타내는 것으로 밝혀졌다.

  • PDF

퇴비화를 이용한 하수슬러지 처리에 있어서 적정 수분함량과 C/N비에 관한 연구 (A Study on Optimum Moisture Content and C/N ratio of Sewage Sludge Treatment Using Composting)

  • 손현석;양원호;정문식
    • 한국환경보건학회지
    • /
    • 제23권2호
    • /
    • pp.44-56
    • /
    • 1997
  • When sewage sludge is treated by cornposting, higher moisture content and lower C/N ratio on sewage sludge is problems. This paper project to alesolve two problems. The almost trends in run 3 of MC 70% are similar to these in run 1 and 4 of MC 65%. A retention time of the highest temperature (>50$\circ$C) and increase rate of temperature in run 3 are an affinity to these in run 4. Particularly, decrease rate of temperature in run 3 is slower than others and this data shows the more activity of thermal microbial in run 3 than that in others. C/N ratio trends in run 3 shows slow reaction in initial stage but, after 9 days, is similar to that in run 1 and 4. Carbon trends in each run are a similarity to C/N ratio trends. Temperature, MC, carbon and C/N ratio trends in run 5, whose C/N ratio is 15, show less microbial activity than that in run 6, whose C/N ratio is 20. But temperature increase of the beginning stage and pH of the final stage in run 5 are greater than that in run 6. Final MC and carbon content in run 5 and 6 have a similar values. That is, final MC in run 5 and 6 is 49.39% and 48.97% and final carbon content in each run is 25.15% and 22.20%. Expecially, a temperature increase and C/N ratio decrease rate of the beginning stage in run 5 are greater than these in run 6. This shows the shorter lag time in run 5 than lag time in run 6.

  • PDF

토양처리형 제초제가 질소비료의 무기화작용에 미치는 영향 I. 침수토양 조건 (The Influence of Some Soil-treated Herbicides on the Mineralization of Nitrogen Fertilizers I. In a flooded paddy soil)

  • 김무기
    • 한국응용곤충학회지
    • /
    • 제15권4호
    • /
    • pp.205-214
    • /
    • 1976
  • 담수상태하에서 Butachlor, Nitrofen, Benthiocarb+Simetryne, Propanil, Perfluidone 등의 제초제가 시비한 질소의 변화과정에 미치는 영향을 조사하기 위하여 요소와 약제를 처리한 후 $24\pm1^{\circ}C$에서 배양하면서 무기능 실소, pH 및 Eh의 변화를 검토하였던 바 다음과 같은 결과를 얻었다. 1. Nitrofen, Benthiocarb + Simetryne, Propanil 등은 전 처리농도에서 요소의 분해에 의한 암모니아의 생성에 아무런 영향이 없었다. Butachlo 와 Perfluidone은 표준시용량의 8배의 고농도 처리에서 처음 암모니아의 생성을 다소 감소시켰으나 이 분해억제효과는 시일이 경과하면서 바로 정상수준으로 회복되었다. 2. Propanil을 제외한 공시약제 모두 전 처리농도에서 실화억제 효과를 찾아 볼 수 없었다 Propanil은 표준량의 8배의 고농도 처리에서 암모니아의 산화를 억제하여 앙모니아태 질소를 축적하고 아질산태 질소와 질산태 질소의 생성을 다소 감소시켰는데 이러한 경향은 시비질소의 농도가 높아지면서 다소 명확하여졌다. 3. PH와 Eh의 변화에 대한 공시약제의 영향은 거의 찾아 볼 수 없었다.

  • PDF

고혈압 환자에서 격팔상생역침범(隔八相生易鐵法)의 혈압강하 효과 (The Antihypertensive Effect of Gyeok pal sang saeng yeok chim Acupuncture Treatment in Hypertension Patients)

  • 한창현;한충희;신미숙;신선화;최선미
    • Journal of Acupuncture Research
    • /
    • 제23권4호
    • /
    • pp.49-60
    • /
    • 2006
  • Objectives : The aim of the study was to investigate the antihypertensive effect of Gyeok pal sang saeng Yeok chim Acupuncture in hypertensive patients. Methods : We measured the blood pressure of the patients who were admitted in the Oriental Medical Clinic of Brother from 13th February 2006 to 13th May 2006. We included the patients only in case of the systolic blood pressure was over 120mmHg or diastolic blood pressure was over 80mmHg, thirty patients were treated by Gyeok pal sang saeng Yeok chim Acupuncture. In order to evaluate the effect of the Gyeok pal sang saeng Yeok chim Acupuncture, the blood pressure and pulse rate were measured before and after Acupuncture procedure total 10 times. Results : There were significant decrease in the systolic blood pressure and significant decrease in the diastolic blood pressure treated by Gyeok pal sang saeng Yeok chim Acupuncture 10 times but pulse rate was not significantly decreased. The effect of Gyeok pal sang saeng Yeok chim Acupuncture by measurement time on blood pressure were follows: In a systolic blood pressure and diastolic blood pressure was gradually deceased significantly from 1st to 10th but pulse rate was not significantly decreased. Conclusion : These results suggest that Gyeok pal sang saeng Yeok chim Acupuncture is effective in decreasing the systolic and diastolic blood pressure.

  • PDF

무선 센서 네트워크에서 동적 히스테리시스 특성을 이용한 이동 노드의 가입 방법 (Method for Joining Mobile Nodes in Wireless Sensor Networks using Dynamic Hysteresis)

  • 이재형;이응수;김동성
    • 전자공학회논문지CI
    • /
    • 제48권4호
    • /
    • pp.68-76
    • /
    • 2011
  • 본 논문에서는 무선 네트워크 환경에서 히스테리시스 특성을 이용한 이동 노드의 네트워크 가입 방법을 제안한다. 제안된 방법은 정적 히스테리시스 특성을 이용하여 이동 노드가 네트워크 전송 경계점에 위치했을 때 빈번히 가입과 탈퇴를 하게 되는 문제점을 해결한다. 그에 따라, 네트워크 가입 요청에 따른 주변 노드들의 응답 패킷을 줄여 에너지 소비를 효율적으로 관리 할 수 있다. 하지만 정적 히스테리시스 방법은 네트워크의 가입률을 감소시키게 된다. 이러한 문제점을 해결하기 위해 동적 히스테리시스 방법을 적용하여 가입률을 향상시킨다. 제안된 방법의 효용성을 증명하기 위해서 히스테리시스 모델들을 적용한 네트워크 가입 방법을 구현하여 이동 노드의 경로에 따라 효율적으로 네트워크 가입됨을 보였다.

The research on static and dynamic mechanical properties of concrete under the environment of sulfate ion and chlorine ion

  • Nie, Liangxue;Xu, Jinyu;Bai, Erlei
    • Computers and Concrete
    • /
    • 제20권2호
    • /
    • pp.205-214
    • /
    • 2017
  • The Hydraulically driven test system and ${\Phi}100mm$ split Hopkinson pressure bar(SHPB) test device were employed to research the quasi-static and dynamic mechanical properties of concrete specimens which has been immersed for 60 days in sodium sulfate (group S1) and sodium chloride (group S2) solution, the evolution of their mass during corrosive period was explored at the same time, and the mechanism of performances lost was analyzed from the microscopic level by using scanning electron microscope. Results of the experimental indicated that: their law of mass both presents the trend of continuous rising during corrosive period, and it increases rapidly on the early days, the mass growth of group S1 and group S2 in first 7 days are 76.78% and 82.82% of their total increment respectively; during the corrosive period, the quasi-static compressive strength of specimens in two groups are significantly decreased, both of which present the trend of increase first and then decrease, the maximum growth rate of group S1 and group S2 are 7.52% and 12.71% respectively, but they are only 76.23% and 82.84% of specimens which under normal environment (group N) on day 60; after immersed for 60 days, there were different decrease to dynamic compressive strength and specific energy absorption, and so as their strain rate sensitivities. So the high salinity environment has a significant effect of weaken the quasi-static and dynamic mechanical performance of concrete.

수소액화 시스템용 이중관 열교환기의 유용도 측정 (Effectiveness Measurement of a Double-Tube Heat Exchanger for a Hydrogen Liquefaction System)

  • 최항집;백종훈;강병하;최영돈
    • 한국수소및신에너지학회논문집
    • /
    • 제10권1호
    • /
    • pp.19-26
    • /
    • 1999
  • 수소 액화시스템의 중요한 구성요소인 열교환기를 이중관 형태로 설계 제작하여 극저온 영역에서의 유용도를 실험적으로 측정하였다. 이중관 열교환기의 내관과 내 외관 사이의 환상 공간으로 수소를 공급하고, 온도와 압력, 유량을 측정하였다. 측정된 온도와 유량으로부터 유용도를 환산한 결과, 열교환면적이 증가함에 따라 열교환기의 유용도는 증가하였다. 또한 저온 수소와 고온 수소의 열용량비가 감소함에 따라 열교환기의 유용도는 증가하나 유용도의 증가폭은 감소하였다. 따라서 본 연구에서는 수소 액화시스템에 필요한 유용도를 얻기 위한 열교환기의 길이 및 열용량비의 선정 기준을 제시하였다.

  • PDF

화재에 의한 폐타이어 혼합 콘크리트강도 변화에 관한 실험적 연구 (A Strength Change of the Concrete Mixed with Waste Type due to Fire)

  • 손기상
    • 한국화재소방학회논문지
    • /
    • 제16권2호
    • /
    • pp.22-26
    • /
    • 2002
  • 산업체에서 들판에 버려지는 폐타이어 경제적으로 재활용하는 방법을 개발하는 것은 아주 중요한 일이다. 이것은 환경 친화적 정책과도 일관성을 갖는 것이다. 폐타이어 재료를 사용하는 강도에 초점을 맞춘 연구들이 많이 진행되었다. 이제, 정부의 지원하에 국내에서 여러 가지 상이한 입자크기의 폐타이어 재료들이 생산되고 있다. 본 연구는 폐타이어 혼합 콘크리트가 "화재시 온도에 따라" 얼마나 저항하는 지를 밝히는 것이다. 그리고 강도감소율이 얼마인지를 찾아내는 것이다. 이들 관련 결과는 이 분야에 대한 실무적 구조물 적용 방법을 구명하기 위하여 비교되고 있다. 배합비율은 경험과 시행착오 법을 사용하여 결과중에서 예상되는 확정적인 몇 가지들이 결론에 제시되어 있다. 600도 가열시의 폐타이어 배합 콘크리트는 섞지 않은 일반 콘크리트의 경우에 비해 강도 변화가 거의 없었다.화가 거의 없었다.

수치해석 모델링을 이용한 교차 흐름 미세유체 액적 생성 디바이스 채널 교차각이 액적 직경에 미치는 영향 (Effect of Intersection Angle of the Flow-focusing Type Droplet Generation Device Channel on Droplet Diameter by using Numerical Simulation Modeling)

  • 김상진;강형섭;양영석;김기범
    • 대한의용생체공학회:의공학회지
    • /
    • 제36권3호
    • /
    • pp.61-68
    • /
    • 2015
  • In this paper, we studied the effects of intersection angles of the flow-foucusing type droplet generation device inlet channel on droplet diameter using numerical simulation modeling. We modeled different intersection angles with a fixed continuous channel width, dispersed channels width, orifices width, and expansion channels width. Numerical simulations were performed using COMSOL Multiphysics$^{(R)}$ to solve the incompressible Navier-Stokes equations for a two-phase flow in various flow-focusing geometries. Modeling results showed that an increase of the intersection angle causes an increase in the modification of the dispersed flow rate ($v^{\prime}{_d}$), and the increase of the modification of the continuous flow rate ($v^{\prime}{_c}$) obstructs the dispersed phase fluid flow, thereby reducing the droplet diameter. However, the droplet diameter did not decrease, even when the intersection angle increased. The droplet diameter decreased when the intersection angle was less than $90^{\circ}$, increased at an intersection angle of $90^{\circ}$, and decreased when the intersection angle was more than $90^{\circ}$. Furthermore, when the intermediate energy deceased, there was a decrease in the droplet diameter when the intersection angle increased. Therefore, variations in the droplet diameter can be used to change the intersection angle and fluid flow rate.