• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.29-38
• /
• 1985

In this paper we have designed and implemented in real time a simple, efficient and flexible AOPCM cosec using a high speed digital processor, NEC 7720. For ADPCM system, we have used an instantaneous adaptive quantizer and a first-order fixed predictor. The software for NEC 7720 has been developed and it was found that the NEC 7720 was capable of performing the entire ADPCAt algorithm for 4 channels in real time as optimizing the program. Computer simulation has born made to investigate a computational accuracr of NEC 7720 and to de-termine necessary parameters for a ADPCM codec. Real telephone speech, RC-shaped Gaussian noise and 1004 Hz tone signal were used for simulation. In simulation, the parameters werc optimized from the computed SNR and the informal listening test. The developed software was tested in real time operation using a hardware emulator for NEC 7720. It took a maximum 23.25$\mu$s to encode one sample and 113.5$\mu$s, including all the necessary 1/0 operations, to encode 4 channels. In the case of decoding process, it took 24.75$\mu$s to decode one sample and 119.5$\mu$s to decode 4 channels.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.67-75
• /
• 2009

Multi-layered video coding that provides scalability across the visual content has emerged for easily adaptive service over current heterogeneous network. However, the network is still error prone environment so that video service may suffer packet loss or erroneous decoding of the video. Especially distortion caused by the burst error may propagate to several pictures until intra refreshing, which will raise a terrific degradation of picture quality. To overcome the problem at terminal independently, we propose a new error concealment algorithm for the multi-layered video coding. The proposed method uses the similarity of between layers in the multi-layered video coding and POCS (Projections Onto Convex Sets) which is a powerful error concealment tool, but heavily dependent on initial values. To find adequate initial value which can reduce iteration times as well as achieve high performance, we took consideration into both features of layered approach coding and the correlation in neighbor blocks. The simulation results show that the proposed concealment method works well.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.19-26
• /
• 2006

In these days, multimedia data is transmitted and processed in compressed format. Due to the decoding procedure and filtering for edge detection, the feature extraction process of MPEG-7 Edge Histogram Descriptor (EHD) is time consuming as well as computationally expensive. To improve efficiency of compressed image retrieval, we propose a new edge histogram generation algorithm in DCT domain in this paper. Using the edge information provided by the only two AC coefficients of DCT coefficients, we can get edge directions and strengths directly in DCT domain. The experimental results demonstrate that our system has good performance in terms of retrieval efficiency and effectiveness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.560-569
• /
• 2005

This paper proposes an algorithm for transmit antenna selection in a multi-input multi-output(MIMO) spatial multiplexing system with per antenna rate control(PARC) and an ordered successive interference cancellation (OSIC) receiver. The active antenna subset is determined at the receiver and conveyed to the transmitter using feedback information on transmission rate per antenna. We propose a serial decision procedure consisting of a successive process that tests whether antenna selection gain exists when the antenna with the lowest pre-processing signal to interference and noise ratio(SINR) is discarded at each stage. Furthermore, we show that 'reverse detection ordering', whereby the signal with the lowest SINR is decoded at each stage of successive decoding, widens the disparities among fractions of the whole capacity allocated to each individual antenna and thus maximizes a gain of antenna selection. Numerical results show that the proposed reverse detection ordering based serial antenna selection approaches the closed-loop MIMO capacity and that it induces a negligible capacity loss compared with the heuristic selection strategy even with considerably reduced complexity.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.103-110
• /
• 2005

The performance of maximum likelihood(ML) detection for the given channel is analyzed in spatially multiplexed MIMO system. In order to obtain the vector symbol error rate, we define error vectors which represent the geometrical relation between lattice points. The properties of error vectors are analyzed to show that all lattice points in infinite lattice almost surely have four nearest neighbors after random channel transformation. Using this information and minimum distance obtained by the modified sphere decoding algorithm, we formulate the analytical performance of vector symbol error over the given channel. To verify the result, we simulate ML performance over various random channel which are classified into three categories: unitary channel, dense channel, and sparse channel. From the simulation results, it is verified that the derived analytical result gives a good approximation about the performance of ML detector over the all random MIMO channels.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.7 s.361
• /
• pp.81-89
• /
• 2007

The Viterbi decoder, which employs the maximum likelihood decoding method, is a critical component in forward error correction for digital communication system. However, lowering power consumption on the Viterbi decoder is a difficult task since the number of paths calculated equals the number of distinctive states of the decoder and the Viterbi decoder utilizes trace-back method. In this paper, we propose a method which minimizes the number of operations performed on the comparator, deployed in the SPEC-T Viterbi decoder implementation. The proposed comparator was applied to the ACSU(Add-Compare-Select Unit) and MPMSU(Minimum Path Metric Search Unit) modules on the decoder. The proposed ACS scheme and MPMS scheme shows reduced power consumption by 10.7% and 11.5% each, compared to the conventional schemes. When compared to the SPEC-T schemes, the proposed ACS and MPMS schemes show 6% and 1.5% less power consumption. In both of the above experiments, the threshold value of 26 was applied.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.193-201
• /
• 2008

Using Network Coding in P2P systems yields great benefits, e.g., reduced download delay. The core notion of Network Coding is to allow encoding and decoding at intermediate nodes, which are prohibited in the traditional networking. However, improper implementation of Network Coding may reduce the overall performance of P2P systems. Network Coding cannot work with general arithmetic operations, since its arithmetic is over a Finite Field and the use of an efficient Finite Field arithmetic algorithm is the key to the performance of Network Coding. Also there are other important performance parameters in Network Coding such as Field size. In this paper we study how those factors influence the performance of Network Coding based systems. A set of experiments shows that overall performance of Network Coding can vary 2-5 times by those factors and we argue that when developing a network system using Network Coding those performance parameters must be carefully chosen.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1617-1622
• /
• 2004

MPEG/Audio decoder for mobile multimedia systems requires low power consumption. Implementations of AV decoder using a single RISC processor often need high power consumption owing to cash-miss in case of insufficient cash memory. In this paper, we present a MPEG/Audio decoder for mobile handset applications and implement it on a RISC processor embedding a minimized DSP accelerator. Audio decoding algorithm is splined into two parts; computation intensive and control intensive parts. Those parts we, respectively, allocated to DSP and RISC core, which are designed to run in parallel to increase the processing efficiency. The proposed system implements MP3 and AAC decoders at l7MHz and 24MHz clocks, which are reductions of 48% and 40% of complexities in comparison with implementations on a single RISC processor. The proposed method is adequate for mobile multimedia applications with insufficient cash memory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.205-214
• /
• 2011

In 3rd generation project partnership long term evolution, wireless multicast techniques which send the same data to multiple users under single frequency networks have attracted much attention. In the multicast system, the transmission mode needs to be selected for efficient data transfer while satisfying the multicast coverage requirement. To achieve this, users' channel state information (CSI) should be available at the transmitter. However, it requires too much uplink feedback resource if all the users are allowed to transmit their CSI at all the time. To solve this problem, in this paper, the multicast coverage prediction is suggested. In the proposed algorithm, each user measures its transition probabilities between the success and the fail state of the decoding. Then, it periodically transmits its CSI to the basestation. Using these feedbacks, the basestation can predict the multicast coverage. From the simulation results, we demonstrate that the proposed scheme can predict the multicast system coverage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.66-76
• /
• 2016

In this paper, we propose a new hierarchical modulation scheme for DVB-NGH to improve the performance of LP (Low-Parity) signals by applying a conventional constellation-rotation method to the LP signals without virtually a loss of performance of a HP (High-Parity) signals. The improvement of the LP signals is mainly due to the increased divesity gain caused by the constellation-rotation method which barely affect the performance of the HP signals. For the new scheme, we also propose a hardware-efficient ML (Maximum-Likelihood) detection algorithm that first decodes the HP signals by using a conventional HP receiver, and then simply decodes the precoded LP signals based on the pre-detected HP signals.