• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.211-232
• /
• 2024

In this paper, we consider the resource allocation and offloading decisions of device-to-device (D2D) cooperative UAV-assisted mobile edge computing (MEC) system, where the device with task request is served by unmanned aerial vehicle (UAV) equipped with MEC server and D2D device with idle resources. On the one hand, to ensure the fairness of time-delay sensitive devices, when UAV computing resources are relatively sufficient, an optimization model is established to minimize the maximum delay of device computing tasks. The original non-convex objective problem is decomposed into two subproblems, and the suboptimal solution of the optimization problem is obtained by alternate iteration of two subproblems. On the other hand, when the device only needs to complete the task within a tolerable delay, we consider the offloading priorities of task to minimize UAV computing resources. Then we build the model of joint offloading decision and power allocation optimization. Through theoretical analysis based on KKT conditions, we elicit the relationship between the amount of computing task data and the optimal resource allocation. The simulation results show that the D2D cooperation scheme proposed in this paper is effective in reducing the completion delay of computing tasks and saving UAV computing resources.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.1000-1010
• /
• 2002

Partial response maximum-likelihood (PRML) and fixed-delay tree search with decision feedback (FDTS/DF) yield a sub-optimum performance in storage systems. However, they suffer from the inevitable complexity problems. this paper focuses on detection schemes to overcome the drawbacks of the sequence detections by exploiting minimum run-length d=2. It is expected that the proposed systems yield substantial reductions of both processing speed and receiver complexity. When combined with a decision feedback equalization (DFE), they prove to keep pace with the FDTS/DF with ${\tau}$=2 and even outperform the PR(1111)ML at normalized density S>5.6.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.164-171
• /
• 2013

In urban planning, road facility is used not only for the transportation purpose but also for the utility line space purpose such as electrical, gas, tele communication, heating, water, sewer, and so on. However, since these utilities are built by many different groups, it becomes very difficult to communicate each other. Delay in one party can cause another party's schedule delay but they don't commuicate often. Also, some delay in utility work can cause frequent pavement cut. And, this will impact on construction cost, schedule delay, low quality, user complain and cost. This study developed spatiotemporal decision model to prevent prequent utility cut for mega project such as new urban development project. In addition, this study developed utility cut management system to manage utility cut schedule under pavement. Finally, developed system was applied to new urban development project and verified there effectiveness.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1542-1550
• /
• 2013

This paper presents new results on delay-dependent global exponential stability for uncertain linear systems with interval time-varying delay. Based on Lyapunov-Krasovskii functional approach, some novel delay-dependent stability criteria are derived in terms of linear matrix inequalities (LMIs) involving the minimum and maximum delay bounds. By using delay-partitioning method and the lower bound lemma, less conservative results are obtained with fewer decision variables than the existing ones. Numerical examples are given to illustrate the usefulness and effectiveness of the proposed method.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1998.10a
• /
• pp.1051-1054
• /
• 1998

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.1-8
• /
• 2008

It is essential to maintain constant QoS despite of cell overload or erroneous wireless link during transmission because QoS of a multimedia service may be severely degraded by small delay or packet loss. This paper deals with a cell selection method for supporting the QoS of multimedia services over heterogeneous networks. The proposed scheme is based on Fuzzy Multi-Criteria Decision Making (FMCDM), in which uncertain parameters such as user system preference, the communication cost and cell load, and the transmission delay are used in the decision process using the aggregation function in fuzzy set theory. In this scheme, errors in the evaluation parameters impose milder changes on the total evaluation value than in binary logics. Simulation is focused on the average delay and packet loss rate, and the simulation results show that our proposed method provides mobile terminals the optimal performance.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.445-458
• /
• 2022

Some of the control systems used in engineering structures that use sensors and decision systems have some time delay reducing efficiency of the control system or even might make it unstable. In this research, in addition to considering the effect of the time delay in vibration control process, predictive control is used to compensate the time delay. A semi-active vibration control approach with the help of magneto-rheological dampers is implemented. In addition to using fuzzy inference system to determine the appropriate control voltage for MR damper, structural behavior prediction system and specifying future responses are also used such that the time delays occurring within control process are overcome. For this purpose, determination of prediction horizon is conducted for one, five, and ten steps ahead for single degree of freedom structures with periods ranging from 0.1 to 4 seconds, subjected to twenty earthquake excitations. The amount of time delay applied to the control system is 0.1 seconds. The obtained results indicate that for 0.1 second time delay, average prediction error values compared to the case without time delay is 3.47 percent. Having 0.1 second time delay in a semi-active control system reduces its efficiency by 11.46 percent; while after providing the control system with structure behavior prediction, the difference in the results for the control system without time delay is just 1.35 percent on average; indicating a 10.11 percent performance improvement for the control system.

• Proceedings of the Korean Reliability Society Conference
• /
• 2000.11a
• /
• pp.329-333
• /
• 2000

Delay time analysis is a pragmatic mathematical concept readily embraced by engineers which has been developed as a means to model maintenance decision problem. This paper considers an inspection period using delay time analysis for fishing vessel equipment. We assume that delay time distribution is Weibull and inspections are perfect. In this paper, we determine the optimal inspection period which minimize the expected downtime per unit time.

• International Journal of Reliability and Applications
• /
• v.2 no.2
• /
• pp.99-105
• /
• 2001

Delay time analysis is a pragmatic mathematical concept readily embraced by engineers which has been developed as a means to model maintenance decision problem. This paper considers an inspection period using delay time analysis for fishing vessel equipment. We assume that delay time has a Weibull distribution. In this paper, we determine the optimal inspection period which minimize the expected downtime per unit time. Explicit solutions for the optimal inspection are presented for illustrative purposes.

• The Journal of Information Systems
• /
• v.10 no.1
• /
• pp.5-25
• /
• 2001

The main purpose of this paper is to develop a Delphi Decision Support System based on the web, which can improve the conventional Delphi method. Among major drawbacks of the conventional Delphi methods are cost and efforts to distribute and collect the questionnaire by the regular mail and the tardiness in collecting, categorizing, analyzing, and reporting the result of the questionnaire. With the proposed Delphi Decision Support System, the moderator sends the e-mail to invite the member of panels so that they may visit the homepage of the Delphi Decision Support System. When the panelists input their opinions about the issues, the Delphi Decision Support System analyzes the inputs and reports the result without delay. To implement the Delphi Decision Support System, we integrated Microsoft SQL Server 6.5, jdbcKona/MS SQLServer 4 JDBC driver, and Java Development Kit 1.2