• 한국광학회지
• /
• 제12권2호
• /
• pp.77-82
• /
• 2001

손실 200 ppm급과 30 ppm급인 두 종류의 시험 반사경을 대상으로, 지수감쇠 방법을 이용한 반사경 손실측정 시스템의 오차 특성이 조사되었다. 공진기 길이 떨림에 의한 공진기 감쇠신호의 지수함수 왜곡을 보상하기 위하여 감쇠신호 데이터 평균기법을 적용하였다. 감쇠신호 6개의 평균이 취해졌을 때 감쇠신호의 지수함수 곡선맞춤 오차개선이 뚜력시 관측되었으며 손실 200ppm급 시험 반사경의 경우 약 2.4배 손실 30ppm급 시험 반사경의 경우 약 1.3배의 반사경 손실 측정오차 개선효과를 얻을 수 있었다 시험 공진기에서의 일별(day-to-day) 반사경 손실측정 반복도 오차가 조사되었다. 손실 200ppm급 시험 반사경의 경우 약 5.0%, 30ppm급 시험 반사경의 경우 약 26.4%의 손실측정 반복도 오차가 관측되었다. 저손실 반사경 평가에서 확인된 낮은 감쇠신호 데이터 평균효과와 높은 손실측정 반복도 오차는 손실측정 시스템 자체의 측정오차 이외에 시험 반사경 표면의 불균일한 손실 공간분포와 주변 오염원 유입의 결과로 분석되었다 또한 공진기 길이 떨림의 크기와 공진기 길이 측정오차가 손실측정 시스템의 정확도에 미치는 영향을 계산을 통해 조사한 결과, 분해능 수 ppm 급 현재의 측정 시스템의 성능에 미칠수 있는 공진기 길이오차의 영향은 충분히 적은 것으로 확인되었다.

• 한국수자원학회논문집
• /
• 제45권2호
• /
• pp.179-189
• /
• 2012

오염물질의 이동 현상을 모의하기 위하여, 감쇠항이 있는 3차원 이송-확산 방정식의 수치모형이 개발되었다. 개발된 모형은 유한차분 모형으로서 시간단계의 가중치 ${\alpha}$를 포함하는 음해법(implicit finite difference method)과, 반복법인 Gauss-Seidel SOR(successive over relaxation)이 사용되었다. 모형은 보다 단순화된 가정 하에서 존재하는 두 가지의 해석적인 해와 비교되었다. 그 결과 Peclet number가 5~20 이하에서는 수치 분산의 영향이 크지 않았고 작은 오차범위 내에서 해석적인 해와 동일하였다. 또한 가중치 ${\alpha}$의 변화에 대한 모형의 거동은 Crank-Nicolson 모형(${\alpha}$=0.5)이 fully-implicit 모형(${\alpha}$=1)보다 해석적인 해에 접근함을 보여주었다. 모형의 검증과 실효성 제고를 위하여, mass balance를 검토하였다. 즉, 이송, 확산 및 감쇠항 각각에 대한 질량 이동을 산출하였으며, 그 결과 질량 이동의 계산 오차는 약 3% 이내였다. 본 모형은 감쇠 과정이 수반되는 3차원 이송-확산의 농도분포와 질량이동을 산출할 수 있으며 다양한 경계조건을 설정함으로서 현장조건을 반영할 수 있다. 그러나본 모형은 고정격자를 기반으로하는 유한차분 모형이므로 Peclet number가 비교적 작게 나타날 수 있는 토양 및 지하수계의 오염물질 이동 등의 문제에서 유용하게 적용될 수 있을 것으로 사료된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.206-218
• /
• 2014

The wave attenuation by floating breakwaters in high amplitude waves, which can lead to wave overtopping and breaking, is examined by numerical simulations. The governing equations, the Navier-Stokes equations and the continuity equation, are calculated in a fixed Cartesian grid system. The body boundaries are defined by the line segment connecting the points where the grid line and body surface meet. No-slip and divergence free conditions are satisfied at the body boundary cell. The nonlinear waves near the moving body is defined using the modified marker-density method. To verify the present numerical method, vortex induced vibration on an elastically mounted cylinder and free roll decay are numerically simulated and the results are compared with those reported in the literature. Using the present numerical method, the wave attenuations by three kinds of floating breakwaters are simulated numerically in a regular wave to compare the performance.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.159-167
• /
• 1996

This paper describes the theory and verification of a method which utilizes the free decay response of a structure to determine its vibration parameters. The theory of the method is base on the formulation of a system matrix, contains information characterizing the complete set of modal parameters of the system, and its eigen-solution problem. The applicability of the method is verified by simulated free decay response data of a cantilever bean The method described was used to determined the parameters related to the first five generated modes of vibration of a cantilever beam. It involves two very close natural frequencies which could not be identified using a frequency sweep test(peak amplitude) because of interference between modes.

• Applied Science and Convergence Technology
• /
• 제25권4호
• /
• pp.81-84
• /
• 2016

InP/InGaP quantum structures (QSs) grown on GaAs substrates by a migration-enhanced molecular beam epitaxy method were studied as a function of growth temperature (T) using photoluminescence (PL) and emission-wavelength-dependent time-resolved PL (TRPL). The growth T were varied from $440^{\circ}C$ to $520^{\circ}C$ for the formation of InP/InGaP QSs. As growth T increases from $440^{\circ}C$ to $520^{\circ}C$, the PL peak position is blue-shifted, the PL intensity increases except for the sample grown at $520^{\circ}C$, and the PL decay becomes fast at 10 K. Emission-wavelength-dependent TRPL results of all QS samples show that the decay times at 10 K are slightly changed, exhibiting the longest time around at the PL peak, while at high T, the decay times increase rapidly with increasing wavelength, indicating carrier relaxation from smaller QSs to larger QSs via wetting layer/barrier. InP/InGaP QS sample grown at $460^{\circ}C$ shows the strongest PL intensity at 300 K and the longest decay time at 10 K, signifying the optimum growth T of $460^{\circ}C$.

• Transactions on Electrical and Electronic Materials
• /
• 제3권4호
• /
• pp.10-15
• /
• 2002

Surface states of polydimethylsiloxane (PDMS) treated by plasma were investigated by the analysis by x-ray photoelectron spectroscopy (XPS) and surface voltage decay. Plasma treatment causes the silica-like(SiO$\_$x/, x=3∼4) oxidative layer, which is confirmed with XPS, and lowers surface resistivity from 1.78$\times$1014 Ω/square to 1.09$\times$10$\^$13/ Ω/square with increasing the plasma treatment time. By measuring the decay time constant of surface voltage, the calculated surface resistivity was compared with the value directly measured by a voltage-current method, so good agreement between two methods was obtained. It was observed that the plasma treatment led to decrease of the thermal activation energy of the surface conduction from 31.0 kJ/mol of untreated specimen to 21.8 kJ/mol. It is found that our results allow the examination of effects of plasma on electrical properties of PDMS.

• 한국환경과학회지
• /
• 제27권7호
• /
• pp.499-507
• /
• 2018

Agricultural meteorological information is an important resource that affects farmers' income, food security, and agricultural conditions. Thus, such data are used in various fields that are responsible for planning, enforcing, and evaluating agricultural policies. The meteorological information obtained from automatic weather observation systems operated by rural development agencies contains missing values owing to temporary mechanical or communication deficiencies. It is known that missing values lead to reduction in the reliability and validity of the model. In this study, the hierarchical Bayesian spatio-temporal model suggests replacements for missing values because the meteorological information includes spatio-temporal correlation. The prior distribution is very important in the Bayesian approach. However, we found a problem where the spatial decay parameter was not converged through the trace plot. A suitable spatial decay parameter, estimated on the bias of root-mean-square error (RMSE), which was determined to be the difference between the predicted and observed values. The latitude, longitude, and altitude were considered as covariates. The estimated spatial decay parameters were 0.041 and 0.039, for the spatio-temporal model with latitude and longitude and for latitude, longitude, and altitude, respectively. The posterior distributions were stable after the spatial decay parameter was fixed. root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and bias were calculated for model validation. Finally, the missing values were generated using the independent Gaussian process model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1569-1571
• /
• 1999

In this work, we have performed the application experiment for real distribution line to diagnose the underground power cables using DC voltage decay measurement system. We have also performed the Isothermal Relaxation Current test for the same distribution line using KDA-l. We could confirmed possibility of grading the insulation aging state of underground power cables. Therefore, we conclude that it is possible to apply DC voltage decay method to the real distribution line.

• 대한수학회보
• /
• 제57권2호
• /
• pp.281-294
• /
• 2020

The initial-boundary value problem for a class of semilinear Klein-Gordon equation with logarithmic nonlinearity in bounded domain is studied. The existence of global solution for this problem is proved by using potential well method, and obtain the exponential decay of global solution through introducing an appropriate Lyapunov function. Meanwhile, the blow-up of solution in the unstable set is also obtained.

• 산업기술연구
• /
• 제13권
• /
• pp.71-80
• /
• 1993

To analyze dynamic characterics for a motorcar, the creating and the hammering test methods are introduced. This paper has studied the method of computing the natural frequency of the impulse wave on a tire, the decay constant which determines the absorption capability for the impulsive force. Moreover we have examined the reliability for the decay constant calculated, in this paper theoritical results are agreed with the simulated ones.