• Title/Summary/Keyword: Dead Zone

Search Result 249, Processing Time 0.03 seconds

COMPUTATIONAL SIMULATION OF FIRE SUPPRESSION SYSTEM FOR CABINS OF SHIPBOARD ENCLOSURE (선박 거주구역용 소화시스템의 전산 시뮬레이션)

  • Jung, I.S.;Chung, H.T.;Han, Y.S.
    • Journal of computational fluids engineering
    • /
    • v.21 no.4
    • /
    • pp.40-45
    • /
    • 2016
  • The numerical simulation has been performed to predict the performance of the fire suppression system for cabin of shipboard enclosure. The present study aims ultimately at finding the optimal parametric conditions of the mist-injecting nozzles using the CFD methods. The open numerical code was used for the present simulation named as FDS (Fire Dynamics Simulator). Application has been done to predict the interaction between water mist and fire plume. In this study, the passenger cabin was chosen as simulation space. The computational domains for simulation in the passenger cabin were determined following the fire scenario of IMO rules. The full scale of the flow field is $W{\times}L{\times}H=4{\times}3{\times}2.4m^3$ with a dead zone of $W{\times}L{\times}H=1.22{\times}1.1{\times}2.4m^3$. The water mist nozzle is installed in ceiling center of 2.3 m height from the floor, and there are six mattresses and four cushions in the simulation space. The combination patterns of orifices to the main nozzle and the position to install nozzles were chosen as the simulation parameters for design applications. From the present numerical results, the centered-located nozzles having evenly combined orifices were shown as the best performance of fire suppression.

Effects of Various Bioreactors on Growth and Ginsenoside Accumulation in Ginseng Adventitious Root Cultures(Panax ginseng C.A. Meyer) (다양한 생물반응기 형태가 인삼(Panax ginseng C.A. Meyer) 부정근의 생장과 Ginsenoside 생산에 미치는 영향)

  • Kim, Yun-Soo;Hahn, Eun-Joo;Paek, Kee-Yoeup
    • Journal of Plant Biotechnology
    • /
    • v.31 no.3
    • /
    • pp.249-253
    • /
    • 2004
  • The type of air lift bioreactor affected the root growth in ginseng adventitious root cultures. Among bioreactors used in this experiment, bulb type bubble bioreactor (BU) was the best to increase root growth (41.92 g dry weight). The kLa value representing the oxygen transfer capacity from medium to explants (6.98 h$^{-1}$ ) in BU with 5 cm bubble column was higher than other bioreactors. On the other hand, cylindric tube bioreactor (CT) without bubble column resulted in minimum root growth (38.55 g dry weight) and kLa value (5.25 h$^{-1}$ ). Furthermore, the root growth (50.30 g dry weight) in BU with 10 cm bubble column more increased than 5 cm bubble column. However, the kLa value do not affected the secondary metabolite such as ginsenosides. These results show that the bubble column in air lift bioreactor increase kLa value and increased kLa value stimulate the growth of ginseng adventitious roots.

Management and Analysis on Ecological Characteristics of the Swamp in Forest - Focused on Southern Parts of Gyeongsangbuk-do - (산림 저습지의 생태적 특성분석 및 관리방안 - 경상북도 남부지역을 중심으로 -)

  • You, Ju-Han;Ra, Jung-Hwa;Jung, Sung-Gwan;Cho, Hyun-Ju
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.11 no.2
    • /
    • pp.75-86
    • /
    • 2008
  • The wetlands have functions those were retention of diverse biota, purification of water quality, control of climate and flood, eco-tourism and supply of agricultural water, and that was the ecosystem of high biodiversity as the zone of transition between inland and water. Therefore, this study showed the conservation and management plan by analyzing in the abiotic and biotic environment of forest swamp, Gyeongsangbuk-do. The results were as follows. Examining the management plan of the abiotic environment, there will need to establish the hydrological plan in continuous expediting the supply of water to maintain a humid soil of swamp, and to try to find the organic farming, use of low toxic agrichemicals and so on to prevent occurring a non-point source pollutants. To prevent changing the flowing of ground water and inflow of earth and sand in modifying the land character, there will be needed to restrict the construction of farmland and slope around swamp. To manage the biotic environment, there needed to offer the habitat by removing the regular interval and individual of a dead tree, and to improve the growth environment of vegetation. Because the naturalized plants disturb the natural vegetation, they will be removed. The afforested trees like Robinia pseudoacacia and Amorpha truticosa will be renewed to prevent the heterogeneity of landscape ecology, and the active conservation plan on wetland species will be established. As this study was carried out to study on the partial swamp, Gyeongsanbuk-do, the ecological environments distributing a swamp in Korea show a some problem. In the future, the study will accomplish to study the accurately and objectively ecological environment and management of a swamp by analyzing the extensive sites.

A Study on Hydraulic Modifications of Low-Pressure Membrane Inlet Structure with CFD and PIV Techniques (CFD와 PIV 기법을 이용한 저압막 유입부 수리구조 개선에 관한 연구)

  • Oh, Jeong Ik;Choi, Jong-Woong;Lim, Jae-Lim;Kim, Donggil;Park, No-Suk
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.11
    • /
    • pp.607-618
    • /
    • 2015
  • This study was conducted to suggest hydraulic modification for improving evenness of inlet flow distribution into side stream type low-pressure MF (microfiltration) module using CFD (computational fluid dynamics) simulation and PIV (particle image velocimetry) techniques. From the results of CFD simulation for various typed inlet structure, it was investigated that installing internal orifice baffle in inlet the distribution channel could improve the evenness of inlet flow distribution over about 40%. Also, from the results of PIV measurements which were carried out for verifying the CFD simulation, it was observed that the momentum of the water body coming from the opposite side of the inlet was relatively larger. This momentum would generate strong shear force in the near of inlet side wall. On the other hands, occurrence of dead zone and eddy flow was confirmed in the opposite side.

Impacts on Residence Time and Water Quality of the Saemangeum Reservoir Caused by Inner Development (새만금 내부개발이 체류시간 및 수질변화에 미치는 영향)

  • Yoo, Sang-Cheol;Suh, Seung-Won;Lee, Hwa-Young
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.15 no.3
    • /
    • pp.186-197
    • /
    • 2012
  • In order to understand hydrodynamic and water quality changes on the Saemangeum reservoir in accordance to inner development plan, intensive numerical simulations using EFDC have been done. Due to inner dike construction and proposed dredging plans, stratification might occur and yield flow field change. It should be noticed that very conditional gate operation schedule adjusting target water elevation of -1.5 meter causes severe stratification and hence plays an important role in poor water qualities. By using random walk particle tracking residence simulations, it is found that hydrodynamic characteristics depends greatly on riverine inflow conditions. It is also inferred that the northern part of the Mangyeong reservoir behaves as a dead zone and acts as major reasoning of water quality deterioration owing to benthic flux from long-term residing settled sediment.

Improvement on resolution of mono-filament wire (초음파 팬텀 내 모노필라멘트의 해상력 개선에 대한 연구)

  • Ma, Sang-Chull;Kong, Young-Kun
    • Journal of radiological science and technology
    • /
    • v.26 no.2
    • /
    • pp.49-56
    • /
    • 2003
  • The purposes of this study are to improve the ultrasound resolution of various nylon and metallic mono-filament wires, therefore, it was tested that it analyze on nylon mono-filament wire of 0.1 mm in A Co.'s ultrasonic phantom and synthesis of C15 g tissue mimicking materials(TMM), analyze resolution of nylon and metallic mono-filament wires in water and TMM. The results obtained were summarized as follows: 1. Metallic mono-filament wire of 0.1 mm and nylon mono-filament wire of 0.12 mm, 180 denier showed that it cleared dot echo pattern. 2. Metallic and nylon mono-filament wire of 0.2 mm showed that it cleared comet tail echo by reverberation artifact. 3. Nylon and metallic mono-filament wire of 0.1 mm showed that it can used for dead zone and axial resolution test. 4. Nylon mono-filament wire compared with metallic mono-filament wire showed that it satisfy elasticity and construction. 5. Degree of hardness of na not changed mono-filament's echo textures.

  • PDF

Simulation of Various Baffle to Improve Settling Efficiency in Constructed Wetland using CFD (인공습지의 비용 효율적 초기 침강지 설계를 위한 최적 도류벽 구조 모의)

  • Noh, Tae gyun;Jeon, Jechan;Kim, Lee Hyung
    • Journal of Wetlands Research
    • /
    • v.19 no.4
    • /
    • pp.451-458
    • /
    • 2017
  • In this study, the removal efficiency of the wetland in terms of particulate matter and dead water zone through the application of baffles in the sedimentation were simulated with the use of Computational Fluid Dynamics (CFD) to determine the design of a cost-effective constructed wetland. As a result, it was analyzed that the application of the baffle in the sedimentation tank affect the flow and sedimentation rate. Fine particles such as $2{\mu}m$ and $5{\mu}m$ showed high sedimentation rate when the baffles are installed horizontally. large particles such as $10{\mu}m$ and $20{\mu}m$ showed also high deposition rate when the baffles are installed vertically. In addition, the vertical baffles is considered to be more efficient than other baffle types in terms of maintenance since the particulate matter are concentrated in narrow areas. Therefore, it is considered that the selection of the most applicable type of baffle depends on the design purpose of the wetland to be constructed.

Review of Medical Act Article 34 the Amendment (의료법 34조 개정(안)에 대한 소고)

  • Jeun, Young-Ju
    • The Journal of the Korea Contents Association
    • /
    • v.15 no.1
    • /
    • pp.152-158
    • /
    • 2015
  • The Korean Government said that it issued advance notice of the amendment of medical act article 34 on Oct. 29 of last year. Another issue at the heart of controversy in 2009 was telemedicine between doctors and patients for the purpose of helping those in the dead zone of medicine and supporting medical service industry. It failed, however, to enact legislation due to the strong opposition from medical profession as well as the apprehension about abuse of medical treatment and the rise of medical expenses. To amend and legislate a law, it is needed in advance to examine and analyze the rationality, propriety and feasibility of it. In particular, when it comes to amending a medical act, the validity should be acknowledged only when the right to life and health of the people is protected. Medical act article 34 is in the state of drift because of stiff resistance from medical and civic groups. This study purpose of analyze and to explain the amendment of recent proposition of Medical Act Article 34 and to suggest possible improvement methods.

A Legislative Device for the University's Safety Management System in Terms of Crisis Management Perspective (위기관리관점에서 대학의 안전관리 법제 방안)

  • Bae, Dae-Shik
    • The Journal of the Korea Contents Association
    • /
    • v.8 no.4
    • /
    • pp.183-196
    • /
    • 2008
  • This research will mainly focus on security issues in a university campus and delve into the risk factors and its characteristics due to the extreme polarization growth, and ultimately conduct research on legislative issues regarding safety & security management. A university campus is a miniature of the society, concentrated with human resources, material resources and knowledge information resources. It is also a region in which various underlying risk factors threaten these resources. However, due to the insensibility of danger and carefree indolence, these risk factors have been ignoring, leaving university campus amidst a "dead zone." Currently, a systematic and synthetic measures not only for safety inside the laboratory but also for the new type of crimes such as cyber crimes and motiveless crime due to extreme polarization, stress, uneasiness about the future, increase of mental illnesses, and drug abuse are urgently required. Therefore, I would like to introduce a legislative program in a crisis management perspective that can prevent universities from danger and protect the resources which would ultimately create a new security system.

Analysis of the O-Ring Deformation Behavior by the Computed Tomography (전산화 단층촬영에 의한 오링 변형 거동 분석)

  • Kim, Dong-Ryun;Kim, Jae-Hoon;Park, Sung-Han;Lee, Hwan-Gyu
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.28 no.1
    • /
    • pp.1-8
    • /
    • 2008
  • The object of this study is to develop the examination technique for measuring the O-ring deformation behavior under the pressure and the squeezed condition simultaneously. The O-ring deformation measuring device in which two grooves were dug to insert the two O-rings was manufactured to be not deformed under the high pressure and the 1 mm and 0.1 mm gap were designed to measure the extrusion lengths under the internal pressure. The beam hardening correction, the histogram analysis and the dead zone correction were executed to exactly measure the shape of O-ring deformation and the lengths of the O-ring deformation were measured by the LSF and the ERF. The computed tomography applied the pressure of 0, 1.378, 4.902, 9.804, 15.692 MPa at 22.3% squeezed condition and the expanded diameter, contact length and extrusion depth were measured in each pressure. The shape of O-ring deformation was evaluated by the FEM to verify the results of measuring by the computed tomography and the area of O-ring was mutually compared to the area measured by the computed tomography.