• 제목/요약/키워드: Dead Section

검색결과 98건 처리시간 0.023초

캐스캐이드형 연료전지 모듈 벤트 로직 최적화 (Optimization of Vent Logic for Cascade Type Fuel Cell Module)

  • 임종구;박종철;권기욱;신현길
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.87.2-87.2
    • /
    • 2011
  • Many type of fuel cell stacks have been developed to improve the efficiency of reactants usage. The cascade type fuel cell stack using dead end operation is able to attain above 99% usage of hydrogen and oxygen. It is sectionalized to several parts and the residual reactants which are used previous parts would be supplied again to next parts which have less number of cells in dead end operation stack. The oversupply of reactants which is usually 120%~150% of the theoretical amount to generate current for preventing the flooding effect could be provided to each part except the last one. The final section which is called monitoring cells is supposed to be supplied insufficient the fuel or oxidant that would have some accumulated inert gas from former parts. It makes some voltage drop in the part and the fresh reactants must be supplied to the part for recovering it by venting the residual gas. So the usage of fuel and oxidant is depend on the time and frequency of opening valves for venting of residual gas and it is important to optimize the vent logic for achieving higher usage of hydrogen and oxygen. In this research, many experiments are performed to find optimal condition by evaluating the effect of time and frequency under several power conditions using over 100kW class fuel cell module. And the characteristics of the monitoring cells are studied to know the proper cell voltage which decide the condition of opening the vent valve for stable performance of the cascade type fuel cell module.

  • PDF

간벌이 한국산 잣나무의 용재품질에 미치는 영향 (Effects of Thinning on the Timber Quality of Pinus koraiensis Grown in Korea)

  • 정성호;정두진;박병수;전수경
    • Journal of the Korean Wood Science and Technology
    • /
    • 제31권2호
    • /
    • pp.16-23
    • /
    • 2003
  • 간벌이 국산 잣나무 조림목의 용재품질에 미치는 영향을 구명함으로써 잣나무 인공조림목의 양질재 생산과 효율적 이용을 위한 기초자료를 제공하고자 수행된 본 연구에서 다음과 같은 결과를 얻었다. 강도의 간벌을 실시한 곳에서는 원목의 단위 m당 표면옹이 출현수가 감소하였고, 죽은 옹이의 비율도 감소하였으나 옹이의 크기는 커졌으며, 옹이의 상향각은 죽은옹이가 산옹이보다 컸다. 굽은 원목은 간벌을 하지 않은 곳보다 강도간벌을 실시한 곳에서 적게 출현하였고, 원주형질률은 강도간벌을 실시한 곳에서 높게 나타났으며 지상고 3.2 m 이하 부위의 원목에서 더욱 향상되었다. 무결점재면률은 무간벌구에 비해 강도간벌구에서 향상되었으며, 원목품등은 간벌을 강하게 실시한 경우일수록 높게 나타났다.

참나무시들음병 신갈나무 피해목과 건전목의 해부학적 특징 비교 (Comparison of Anatomical Characteristics for Wood Damaged by Oak Wilt and Sound Wood from Quercus mongolica)

  • JEON, Woo-Seok;LEE, Hyun-Mi;PARK, Ji-Hyun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제48권6호
    • /
    • pp.807-819
    • /
    • 2020
  • 본 연구에서는 참나무시들음병에 감염된 신갈나무의 기초자료를 확보하기 위하여, 해부학적 특징을 비교·분석하고자 하였다. 해부학적 특징을 비교하기 위해, 감염목, 고사목 및 건전재 신갈나무를 수에서부터 10~50번째 연륜까지 10연륜 단위로 광학현미경과 주사전자현미경을 이용하여 관찰하였다. 목섬유 길이는 수에서부터 5연륜 단위로 측정하였고, 도관요소 직경 및 타일로시스를 포함한 도관의 비율은 10연륜별로 측정하였다. 횡단면 관찰 결과, 감염목과 고사목에서는 도관 내강에서 티일로시스와 함께 균사체가 관찰되었다. 목섬유 길이 및 도관요소 직경은 조사목 간 큰 차이를 보이지 않았다. 목섬유 길이는 미숙재 부위인 20~30연륜 이후 안정화되는 경향을 보였다. 타일로시스를 포함한 도관의 평균 비율은 감염목이 가장 높았고 특히, 감염목과 고사목은 40~50연륜에서 타일로시스의 비율이 가장 높았다. 이를 통하여, 참나무시들음병 피해목과 건전재 간에 큰 차이는 타일로시스의 비율로 생각되며, 피해목 이용에 있어 기초자료로 활용 가능할 것이라 사료된다.

신생아 Apgar Score의 시간적 변동에 관한 임상적 관찰 (Clinical Observation on Apgar Score Changing of the Newborn Infants)

  • 박희정
    • 대한간호학회지
    • /
    • 제4권2호
    • /
    • pp.57-66
    • /
    • 1974
  • This study was attempted for clinical investigation regarding with Apgar score changing phase of newborns and their sucking power related the score and weight. The data for this study obtained from 545 newborns who were born at Dept. of obstetric WooSok Hospital, Korea University from Jan. to Sept.. 1373. It is hoped that this study will contribute to nursing care planning of newborns in nursery. The Apgar score was checked in the delivery room at 1 minute after delivery by Doctor and rechecked at 30 minutes and 1 hour after delivery by nurses. The results obtained were as follows: 1. The total newborn numbers at 1 minute after delivery were 545, at 30 minutes were 542 (3 dead) and at 1 hour were 540. The babies were divided into 3 groups by the Apgar score. The frequency of group 1 (score 1 to 4) at each times were 5.0%, 0.9%, 0.4%, group 2 (score 5 to 7) 11.2%, 4.1%, 1.7% and group 3 (score 8 to 10) 83.8%, 95.0%, 97.9%. 2. The group I was found most frequently among the cases of less than 2, 500g and group 3 was found among the cases over 2.500g. It was found that there was a tendency of delaying in recovery process of low score among the premature and low birth weight newborns. 3. The type of delivery, breech and other I e was found worst and C-Section was the second, however normal spontaneous delivery was found the best. 4. In observation of sucking power of the newborn related its score and weight, good, fair, poor marks were given. But for convenience of statistical analysis. good and fair was collected together and poor alone evaluated. The result of group 1.2 examined statistically by F.E.T shown no relation between newborn weight and sucking power. however group 3, examined by X$^2$test shown very significant relation between newborn weight and sucking power. 5. The mortality rate of newborn while they were in hospital was found 2.6% to 545 of birth and all cases of dead belonged to group 1 at 1 minutes after delivery. 64.3% of the dead was found among the cases less than 2, 500g. 6. It was found that in this observation premature and Newborn asphyxia had influence to low score at birth. Conclusively, good anthemata carr should be emphasized in order to prevent main causes of these and should avoid abnormal delivery as possible.

  • PDF

Improved Survival of Cervical Cancer Patients in a Screened Population in Rural India

  • Jayant, Kasturi;Sankaranarayanan, Rengaswamy;Thorat, Ranjit V;Muwonge, Richard;Hingmire, Sanjay J;Panse, Nandkumar S;Shastri, Surendra S;Malvi, Sylla G;Nene, Bhagwan
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권11호
    • /
    • pp.4837-4844
    • /
    • 2016
  • Objectives: To describe the survival experience of cervix cancer patients in a screened rural population in India. Methods: Included 558 cervical cancer patients diagnosed in 2000-2013 in a cohort of 100,258 women invited for screening during 2000-2003. The primary end point was death from cervical cancer. We used the Kaplan-Meier method to estimate cumulative observed survival and Cox proportional hazards regression to assess the effect of patient characteristics on survival after diagnosis. Results: Of the 558 cases included, 143 (26%) and 114 (20%) were diagnosed in stages IA and IB respectively; 252 (45.2%) were dead, and 306 (54.8%) were alive at the last follow-up. The overall 5-year observed survival was 60.5%. The 5-year survival of stage IA patients was 95.1% and 5.3% for stage IV patients. All surgically treated stage IA patients, 94.1% of stage IB patients receiving intracavitary radiotherapy, 62% of stage IIB, 49% of stage III and 25% of stage IV patients receiving radiotherapy survived for 5 years. Conclusion: Higher 5-year survival in our study than elsewhere in India is due to the high proportion of early stage cancers detected by screening combined with adequate treatment, resulting into a favourable prognosis.

콘크리트 박스 구조물용 보수재의 부착강도 향상을 위한 기계식 가압장비(MPE) 성능에 관한 연구 (A Study on the Performance of Mechanical Pressurizing Equipment(MPE) for Improving Bond Strength of Repair Materials for Concrete Box Structures)

  • 유형식;정지승
    • 문화기술의 융합
    • /
    • 제6권1호
    • /
    • pp.477-483
    • /
    • 2020
  • 콘크리트 박스 구조물이 열화되어 보수보강이 필요할 경우 스프레이 장비로 구조물 단면에 보수재를 분사하여 부착시키는 방법에 의존하고 있는데 천장 또는 벽체부위의 경우 시공 후 보수재 자중 또는 중력에 의해 부착력이 저하될 수 있으며 지하철 구조물의 경우 진동 등에 의해 초기 부착력이 떨어지는 문제점이 발생한다. 또한 작업자의 숙련도와 시공환경에 따라 보수품질이 변동되기에 이에 대한 보완책이 필요한 실정이다. 본 연구에서는 중력에 의한 보수재의 부착력 저하 및 인력시공에 의한 보수품질의 변동과 같은 문제점을 해결하고자 보수재 시공 후 소정의 압력을 가할 수 있는 기계식 가압장비를 개발하였다. 그리고 가압장비의 성능을 알아보고자 현장조건을 모사할 수 있는 챔버를 제작하여 가압 유무, 단면부위 및 환경조건을 달리한 부착강도를 측정한 결과 가압할 경우 그렇지 않은 경우보다 부위별로 차이가 있었으나 최대 70% 부착강도가 증가하는 효과를 얻을 수 있었다.

LIT 거더 성능 개선에 대한 연구 (A Study on LIT Girder Performance Improvement)

  • 김성;박승진
    • 도시과학
    • /
    • 제11권2호
    • /
    • pp.19-24
    • /
    • 2022
  • Conventional RC beams for crossing small and medium-sized rivers do not have a cross-sectional area, so the floating debris is accumulated and disasters such as damage to bridges occur. To improve this, the PSC method was invented. However, this also had problems such as transverse curvature, increase in dead weight due to cross-sectional shape, and negative moment generated during serialization, so it was necessary to develop a new type of girder. Therefore, it was intended to propose a LIT(Leton Interaction Thrust) girder bridge that is safer and has better performance than the conventional PSC girder with improved section efficiency. Unlike existing girder bridges, the LIT girder has the feature that the change in the strands of the entire girder occurs only in the vertical direction when the first tension is applied because the tendon arrangement is symmetrical by applying the raised portion. In addition, slab continuation generates a secondary moment that is advantageous to the continuous point, effectively controlling the negative moment and preventing the corrosion of the tendon. The dimensions of the cross section were determined, and the arrangement of the strands was designed to conduct structural analysis and detailed analysis. As a result of the structural analysis, the stress of the girder showed results within the allowable compressive stress, and the deflection showed the result within the allowable deflection. showed results. In addition, a detailed analysis was performed to examine the stress distribution around the girder body and the anchorage area and the stress distribution of the embossed portion, and as a result, the stress of the girder body due to the tension force showed a stable level.

하중저항계수설계법(LRFD)으로 설계된 강합성 거더의 휨에 대한 신뢰도해석 (Reliability Analysis of Composite Girder Designed by LRFD Method for Positive Flexure)

  • 신동구;김천용;백인열
    • 대한토목학회논문집
    • /
    • 제26권3A호
    • /
    • pp.539-546
    • /
    • 2006
  • 국내 LRFD 도로교설계규정을 정립하기 위한 기초 자료를 제공하기 위하여 단경간 플레이트 거더 및 박스 거더 합성단면을 하중저항계수설계법으로 설계하고 설계된 단면의 휨에 대한 신뢰도해석을 수행하였다. 신뢰도해석에서 휨저항강도는 최근 국내에서 생산된 16,000여 구조용 강재 표본의 항복강도 통계적 특성이 반영된 강합성단면의 휨저항강도 통계를 이용하였다. 활하중에 의한 작용모멘트 통계는 고정된 값을 사용하지 않고 편심계수 0.95-1.05를, 변동계수는 0.15-0.25로 가정하였다. 강거더 자중, 콘크리트 바닥판 자중, 포장면 자중 등에 의한 고정하중 모멘트 통계 값은 AASHTO 보정자료를 사용하였다. Rackwitz-Fiessler 법으로 신뢰도해석을 수행하고 지간별, 강거더 형식별, 활하중 모멘트의 불확실성 정도별로 신뢰도지수 계산 결과를 제시하였다.

PSSC 합성거더 교량의 프리스트레스 효과 및 신뢰도 해석 (Analysis of Prestress Effect and Reliability of PSSC Composite Girder Bridge)

  • 황철성;백인열
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권6호
    • /
    • pp.214-224
    • /
    • 2008
  • 프리스트레스하중이 작용되는 강합성교인 PSSC 교량에서 프리스트레스의 효과와 단면의 변형에 따른 텐던의 변형의 영향을 밝히기 위해 교량지간 25m~45m의 최적화된 표준단면에 대해 고정하중 및 활하중이 작용될 때 합성전 후에 발생하는 부재내의 변형도 및 응력변화와 허용응력 한계상태, 항복응력 한계상태 및 강도한계상태의 단면력과 부재내의 변형도 및 응력변화를 구한다. 또한 거더의 처짐 및 응력과 휨강도를 변수로 하는 한계상태들을 가정하고 이에 대한 신뢰도 분석을 수행하였다. 표준 PSSC 교량의 경우 하중 및 저항계수를 적용하여 설계하는 미국 설계기준의 목표신뢰도지수 값이 3.5 임과 비교하면, 허용응력을 기준으로 설계한 단면은 강도에 대하여 상당히 높은 수준의 신뢰도지수를 보임을 알 수 있다.

토양과 비배관리에 의한 순비기나무의 재배방법에 관한 연구 (Study on the Cultivation of Vitex rotundifolia According to Different Soils and Fertilization Methods)

  • 김계환;서병수;윤세억;박종민
    • 한국환경생태학회지
    • /
    • 제21권6호
    • /
    • pp.544-553
    • /
    • 2007
  • 본 연구는 우리나라에 자생하는 순비기나무의 실생묘와 삽목묘를 이용하여 토양의 종류와 시비방법에 따른 재배방법을 구명하고자 한 것으로서, 그 결과를 요약하면 다음과 같다. 순비기나무의 1년생 실생묘와 삽목묘를 모래, 마사토, 황토 등 3종류의 토양에 시비하지 않고 재배한 결과, 실생묘는 모래와 마사토에서 70% 그리고 황토에서 35%의 생존율을 나타내었고, 삽목묘는 마사토에서 90% 그리고 모래와 황토에서 80%의 생존율을 나타내었다. 실생묘와 삽목묘 모두 전반적인 생장은 마사토와 모래에서 양호하였고, 황토에서 비교적 불량하였다. 실생묘의 경우는 줄기생장이 양호하였고, 삽목묘의 경우는 뿌리생장이 양호하였다. 마사토를 기본토양으로 하고 비료의 종류와 시비량을 조절하여 재배하였을 경우에 유기질 비료만을 기비로 시비한 시험구에서만 묘목이 생존하였고, 무기질비료와 액비를 시비한 시험구에서는 식재한 묘목이 모두 고사하였다. 시비구에서 삽목묘는 실생묘에 비해 월등히 높은 생존율을 나타내었고, 특히 소량 시비구에서는 실생묘에 비해 2배 이상 높은 생존율을 나타내었다. 이상의 결과를 요약하면, 순비기나무 묘목을 재배할 때에 삽목묘가 실생묘보다 전체적인 활착과 생장이 양호하며, 토양에 대한 적응성도 높고, 토양비옥도에 대한 요구도가 적은 것을 알 수 있었다.