• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.90-95
• /
• 2021

Surface modification technique enabling the control of condensation provides various benefit in various engineering systems, such as heat transfer, desalination, power plants, and so on. In this study, lubricant oil-impregnation into Teflon-coated nanoporous anodic oxide layer of aluminum to enhance a de-wetting and mobility of water droplet on surface. Due to the surface treatment improving water-repellency, the condensation mode is changed to dropwise, thus the frequency of sliding condensed water droplet on surface is increased. For these reasons, the surface of oil-impregnated Teflon-coated nanoporous anodic aluminum oxide shows significantly enhanced condensation heat transfer compared to bare aluminum surface. In addition, the porosity of anodic aluminum oxide affected the mobility of water droplet even with oil-impregnation and Teflon-coating, indicating that the optimization of porous structure of anodic oxide is required for maximizing the condensation heat transfer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.121-127
• /
• 1985

This study was designed to gain practical data on the use of soil conditioners for more efficient water managements and to establish the optimum levels of structural properties for soil conditioning. A sandy loam and a silt loam soil were each treated with two different soil conditioners, hydrophobic Bitumen or hydrophilic Uresol. The perspex tube 34 cm long were packed homogeneously with air dried soil up to 2 cm below the top, then covered over 2 cm of treated or untreated aggregates. The infiltration rate into the soil columns was measured under simulated rainfall condition. The evaporation study was carried out in the wind tunnel, and the changes of soil moisture distribution of the columns following and during the evaporation were determined by a gamma ray scanner. The infiltration rate of water into the soil column was increased to 18.7-50.8% by the Uresol treatment but it was decreased to less than 25% of control by the Bitumen treatment. Evaporation was decreased to 22.0-68.1% by the Bitumen treatment and to 38.7-68.4% by the Uresol treatment. The water use efficiency of Uresol treated column was increased to more than twice as much as that of untreated soil. Aggregate stability and wetting angle were related to water infiltration and evaporation. A positive and highly significant logarismic relationship was found between the infiltration rate and stability index-wetting angle, evaporation rate and instability index-wetting angle. It was considered that the structural stability is more important than wetting angle. This is true because the structural stability is always positively correlated to water saving, however wettability is positively correlated to the infiltration, and negatively correlated to water saving during the evaporation.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.10-20
• /
• 2008

In order to study the behaviors of inorganic fillers in recycling of the waste agricultural plastic films, the washed PE fluffs from Shihwa and Jungeup Plant belonging to ENVICO were used respectively. First of all, the test pellets were manufactured by adding of inorganic fillers suchlike calcium carbonate and calpet by certain portions to PE fluffs and then the tested sheets were formed. The mechanical and thermal properties of the samples were measured and compared with others. The items measured were tensile, flexural, Izod impact, HDT, MFT, and so on. Morphologies were also investigated for various samples using the SEM. Finally, optimum ratios between recycled PE and inorganic additives were found out for the best products in physical condition as well as in economic point of view.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.373-377
• /
• 1985

This experiment was designed to find out the soil properties to control the soil erodibility. Two kinds of soil conditioners, hydrophilic Uresol and hydrophobic Bitumen were treated to sandy loam and silt loam. Soil erodibility was tested during a simulated rainfall in a soil pan which was covered with a 2cm layer of treated and untreated aggregates (< 5.36mm) on a soil layer. The runoff starting time was delayed 8-20 minutes by Uresol treatment and it was hasten 1-21 minutes by Bitumen treatment. Runoff rates were reduced by Uresol to 62.5% in sandy loam and 93.7% in silt loam, but it was increased by Bitumen treatment. Erosion from the Uresol treated soil was remarkably reduced to 1.7-23.6% of that in the untreated soil. In case of the Bitumen treatment, the soil loss from silt loam was reduced to 55.5% of the control, but it was increased in sandy loam soil by 52% over the control. The ratio of soil loss and runoff, sediment concentration in runoff, was noticeably increased when the soil structure was unstable. There was significant correlation between soil loss and logarithm of wetting angle-stability index. Soil loss was greatly increased when the index was less than 0.2.