• 보존과학회지
• /
• 제31권2호
• /
• pp.131-145
• /
• 2015

문화재 보존처리는 손상된 문화재의 수명을 연장하고 그 가치를 재조명하는 실질적 수단으로서 높이 평가 받고 있다. 그러나 보존처리 과정은 대부분 보존처리자의 경험과 기술에 의한 수작업에 의존하고 있어 이에 따르는 많은 시간과 노력이 요구된다. 최근에는 문화재의 재질 특성과 형상에 따라 보다 정확하고 손쉽게 보존처리를 진행할 수 있는 방법을 채용할 수 있게 되었다. 즉, 지금까지 수작업으로 이루어지는 보존처리과정을 3D 프린터를 이용하여 컴퓨터상에서 구현된 입체 형상 데이터를 실물로 출력하는 방법을 이용하는 것이다. 먼저 문화재의 결손 부분을 컴퓨터상의 데이터로 구축한 다음 3D 프린터로 출력하여 결손 부분을 손쉽게 성형 및 가공 과정을 거치는 것이다. 3D 프린터 적용결과 반복적인 출력 및 디지털데이터의 형태 및 수치 조정이 가능하였으며, 다양한 소재를 활용한 여러 가지 복원재료로 부터 시험출력을 통하여 문화재 복원의 완성도를 향상시킬 수 있었다. 본 연구에서 도자기 결손부분 복원을 위한 3D 프린터 적용 시험을 위하여 현대 재현품인 청자칠보무늬향로와 차륜식토기 2점을 인위적으로 파손시켰다. 복원결과 수작업에 비해 작업시간 단축 및 정확한 형태의 재현 등에서는 좋은 효과를 나타내었다. 반면 정밀한 접합 및 표면 질감을 생생하게 표현하기 위해서는 약간의 2차적인 수작업이 필요하였다.

• 한국지리정보학회지
• /
• 제14권3호
• /
• pp.174-187
• /
• 2011

항공 LiDAR 측량으로 토석류 발생 전 후의 지형자료를 취득하는 경우 토석류로 인하여 유출된 토사량을 알 수 있다. 그러나 토석류 발생지를 미리 예측하여 촬영하기가 힘들고, 토석류 발생 지역의 과거 항공 LiDAR 자료는 존재가능성이 낮아 토석류 발생이전 지형자료를 이용하는 것은 어렵다. 따라서 본 연구에서는 토석류 발생지역의 토사량 추정을 위해 발생전 지형을 복원하고, 토사유출의 공간적 범위를 파악할 수 있는 지형복원기법을 개발하였다. 지형복원기법은 토석류 발생지역에서 추출한 선형 및 비선형 횡단면을 가우시안혼합모델로 수식화하고 중심점 추정방법과 근사정확도로 근사결과를 평가하여 토석류 발생이전의 지형을 복원한다. 지형복원기법은 토석류 발생 전 후의 항공 LiDAR 자료를 이용하여 두 가지 방법으로 검증하였다. 먼저 토석류 발생구간에서 추출한 각 횡단면을 지형복원하여 발생전 항공 LiDAR 자료와 비교하였다. 또한 토석류 발생지역에 지형복원기법을 적용한 뒤 지형자료를 제작하여 토석류 발생전 항공 LiDAR DEM과 비교하여 검증하였다. 지형복원기법의 검증한 결과 전반적으로 근사정확도가 0.5m에 가까운 높은 정확도를 나타냈다.

• 한국환경복원기술학회지
• /
• 제13권3호
• /
• pp.152-162
• /
• 2010

This study provides preliminary data to support the need for appropriate and thorough restoration of quarries through investigating both domestic and overseas cases of sites that were restored in environment-friendly ways to make them re-usable after extraction. In cases of areas where it is difficult to restore the cut slope, putting it to other uses such as engraving buddhist images would be helpful to reduce the restoration cost and enhance the utilization of the slope. Phased land use conversion after exploitation needs to be considered in advance; for example, the location and size of the quarry should be determined according to the pre-planned use or development of the site. Considering the circumstances in the country, serious consideration should be given to methods that allow the restoration or recovery of the damaged sites to be completed in short periods of time. Quarry restoration needs to be approached from the view of ecological restoration and if a site is deemed to be usable for another purpose, land use conversion should be considered to enhance the utilization.

• 한국환경복원기술학회지
• /
• 제26권5호
• /
• pp.33-46
• /
• 2023

In this study, carbon storage in the aboveground biomass, litter layer, and soil layer was calculated for abandoned mining restoration areas to determine the level of carbon storage after the restoration project through comparison with the ecological reference. Five survey sites were selected for each abandoned mining restoration area in Boryeong-si, Chungcheongnam-do, and the ecological reference that can be a goal and model for the restoration project. The carbon storage in the restoration area was 0~21.3Mg C ha^-1, the deciduous layer 3.3~6.0Mg C ha^-1, and the soil layer(0-30cm) 8.3~35.1Mg C ha^-1, showing a significant difference in carbon storage by target site. The total carbon storage was between 6.1 and 35.3% of the ecological reference, with restoration area ranging from 14.0 to 62.4 Mg C ha^-1. The total carbon storage in the restoration area and the ecological reference differed the most in the aboveground biomass and was less than 12%. Based on these results, forest restoration area need to improve the carbon storage of forests through continuous management and monitoring so trees can grow and restore productivity in the early stages of the restoration project. The results of this study can be used as primary data for preparing future forest restoration indicators by identifying the storage of abandoned mining restoration areas.

• 한국조경학회지
• /
• 제25권3호
• /
• pp.155-176
• /
• 1997

Today most landscape architects and scientists have approached ecological restoration, only in a scientific way or on aesthetic way so as to deal with the complex phenomena of a site easily. However, 'the real world' as well as 'ecological nature' as it is can not be totally dealt by the scientific approach which is quantitative and reductioinal. ince a site to be restored has the character of 'place' where man 'dwells', it must be designed and built as total phenomenon. In terms of Martin Heidegger's interpretation of "revealing", we might find out how to overcome the dilemma of the 'modern technology'. To the point of the phenomenological integrity between 'modern technology' and 'art', we can reveal 'sense of place' on a site. The phenomenological approach, which is related to the characteristics of the site, implies something more than scientific since it focuses on the development of site-specific data without wasting extra data for ecological restoration. Bodily experiencing a site with the perception, man discloses the site's nature and he also analyzes it in a scientific way. Therefore the phenomenological approach might be a clue of constructing ecological restoration as well as construing the identity of landscape architecture.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.367-372
• /
• 2001

Feature restoration is that restore feature to 3D solid model using the feature information in STEP AP224. Feature is very important in CAPP, but feature information is defined very complicated in STEP AP224. This paper recommends the algorithm of extraction the feature information in physical STEP AP224file. This program import STEP AP224 file, parse the geometric and topological information, the tolerance data, and feature information line-by-line. After importation and parsing, store data into database. Feature restoration module analyze database including feature information, extract feature information, e.g. feature type, feature's parameter, etc., analyze the relationship and then restore feature to 3D solid model.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.605-608
• /
• 2008

Storm and flood damage management systems in national disaster management system(NDMS) were organized into three operation systems. They are prevention, preparation, response, and recovery systems. Disaster resources in each system must be promptly and exactly applied to minimize casualties and loss of properties. However, the disaster resources in current management system can not be immediately used in calamity situation due to the lack of efficiency in statistical data. Therefore, it is necessary to classify the emergency restoration equipment for efficient management and mobilization of disaster resources in disaster situation. In this study, field survey was executed to appropriately classify the emergency restoration equipment. Problems and reformation points of the disaster resources system were also presented to improve the classification technique and to construct the data base.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권6호
• /
• pp.2086-2097
• /
• 2021

The current cultural assets are being restored depending on the opinions of experts (craftsmen). We intend to introduce digitalized artificial intelligence techniques, excluding the personal opinions of experts on reconstruction of such cultural properties. The first step toward restoring digitized cultural properties is separation. The restoration of cultural properties should be reorganized based on recorded documents, period historical backgrounds and regional characteristics. The cultural properties in the form of photographs or images should be collected by separating the background. In addition, when restoring cultural properties most of them depend a lot on the tendency of the restoring person workers. As a result, it often occurs when there is a problem in the accuracy and reliability of restoration of cultural properties. In this study, we propose a search method for learning stored digital cultural assets using AI technology. Pagoda was selected for restoration of Cultural Properties. Pagoda data collection was collected through the Internet and various historical records. The pagoda data was classified by period and region, and grouped into similar buildings. The collected data was learned by applying the well-known CNN algorithm for artificial intelligence learning. The pagoda search used Yolo Marker to mark the tower shape. The tower was used a total of about 100-10,000 pagoda data. In conclusion, it was confirmed that the probability of searching for a tower differs according to the number of pagoda pictures and the number of learning iterations. Finally, it was confirmed that the number of 500 towers and the epochs in training of 8000 times were good. If the test result exceeds 8,000 times, it becomes overfitting. All so, I found a phenomenon that the recognition rate drops when the enemy repeatedly learns more than 8,000 times. As a result of this study, it is believed that it will be helpful in data gathering to increase the accuracy of tower restoration.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.107-122
• /
• 2023

This study analyzed the style, dimensions, fabric patterns, colors, and fabrics of a traditional Chinese women's dress from the Zhou Dynasty, and reconstructed it in the form of a virtual garment using 3D CLO. Based on ancient flat image data and three-dimensional portrait data, who wore them, how they were worn, and how they were coordinated was analyzed. In order to analyze the size and pattern of the straight Ju Chines dress, data from the excavation report and the tomb owner's anthropometric measurements were combined to infer the wearing condition and organize the sculptural features. Dimensional analysis was carried out using a well-preserved small-scale woven cotton cloth as a restoration model, and the horizontal and vertical dimensions were reasonably estimated using the shape proportioning method. The analysis of the colors and patterns of the fabrics was based on the colors and patterns of the fabrics excavated from Masan Tomb No. 1 during the Eastern Zhou, Qin, and Han periods. Finally, a virtual model was created using data from the excavation report and the age and height information of the owner of the excavated robe, and the pose and size of the virtual model were determined using 3D CLO. Based on the previous research data, the garment was virtually sewn and simulated. The shape, pressure, and strain of the garment in different postures was also compared. Through the research direction of pattern and 3D restoration, this research maximizes the restoration of Chinese traditional women's dress and presents it in a more intuitive, comprehensive, and vivid way.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.197-202
• /
• 2012

본 연구에서는 미래 도시재생의 기본 방향과 정책수립, 거주민의 자족적 사회적기업의 기반마련에 대한 기초자료를 제공하기위해 시민들의 도시재생에 대한 인식을 분석하고, 도시재생사업에 대해 정리하고, 일자리 창출을 위한 도시재생과 사회적기업의 성공적 연계모형을 구축하기 위한 기초적 분석을 실시하였다.