• Journal of Applied Reliability
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2010

In general, the performance of a component degrades as time goes by and failure of a component occurs when the performance degradation reaches a pre-specified level. It is difficult to obtain the failure time distribution data or the necessary number of failure data especially for the metal or machine part. Thus, a design of reliability qualification test based on performance distribution is more effective than failure time distribution. In this study, a performance-based reliability qualification test is developed and a numerical example is provided to illustrate the use of the developed reliability qualification test. This approach could be applied to many kinds of metal or machine part whose magnitude of strength could not be evaluated during at any random points but judgement can be made by only failure of the part. Besides, it is also possible that any parts which have a similar failure characteristics could be applicable to the developed reliability qualification test.

• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.8-11
• /
• 2015

Since the late 1990's, FAA, NASA and the aerospace industry have worked together to develop the sharing system of the composite material qualification databases which were obtained through the standardized fabrication and testing procedures. The result was what is now known as the AGATE(Advanced General Aviation Transport Experiments) or NCAMP(National Center for Advanced Materials Performance) methodology, a more cost-effective concept that shifts the major responsibility for qualification and testing from the aircraft manufacturer to the material supplier. The properties of composite materials are largely dependent on the testing as well as the raw material properties and the manufacturing process including the process control parameters. Thus it is important in the composite material qualification to comply with the standardized testing procedures. In this paper, I will describe the standardized witness methodologies of certification engineers to reduce the effect of testing variability within the qualification data.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.131-136
• /
• 2019

As the NCS(National Competency Standards) classification system continued to be developed and supplemented, NCS became widespread. Qualifications were redesigned to actively reflect industry demands, reduce the burden of redundant acquisition of unnecessary qualifications, and to evaluate objective capacities of the workforce. In addition to the learning modules to be developed in the future, previously developed NCS-based learning modules and lectures should be reorganized based on the new qualification design. In this paper, the Java programming subject designed based on NCS was redesigned according to SW new qualification design. Since the redesigned Java programming subjects consider the qualification design direction or qualification roadmap, not only can they be recognized as a test subject in qualification assessment through course evaluation, but also can be used as individual qualification data.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9411-9416
• /
• 2014

Background: Cancer registration data is used to understand the nation's cancer burden, and to provide significant baseline data for cancer control efforts, as well as, research on cancer incidence, mortality, survival, and prevalence. A system that approves, assesses, and manages the qualification of specialists, responsible for performing cancer registration, has not been developed in Korea. This study presents ways to implement a certification system designed for the qualification of tumor registrars in Korea. Materials and Methods: Requirements for implementing a certified tumor registrar qualification system were determined by reviewing the system for establishing qualifications in Korea and the American qualification system via the National Cancer Registrars Association (NCRA). Moreover, a survey was conducted on Korean medical records administrators, who had taken the U.S. Certified Tumor Registrar (CTR) examination, in order to review their opinions regarding these requirements. Results: This study verified the feasibility of a qualification examination based on the opinions of CTR specialists by determining the following: items, and the associated ratings, of the qualifications necessary to register individuals as certified tumor registrars in a private qualification system; status of human resources required for the examination or training processes; plans regarding the organization needed for management, and operation of qualifications, examination standards, subject areas, examination methods, examination qualifications, or education and training programs. Conclusions: The implementation of a certified tumor registrar qualification system will lead to enhanced job competency for specialists and a qualitative improvement of cancer registration data. It will also reliably foster human resources that will lay the groundwork needed to establish scientific and reasonable national cancer management policies.

• Hwankyungkyoyuk
• /
• v.14 no.1
• /
• pp.43-55
• /
• 2001

The purpose of this study was to review the current status and problems of the national qualification system in the Environmental field focusing on deficiencies of the regulatory system and qualities of environmental professional including the Environmental control Professional Engineer, Environmental Engineer, Environmental Industrial Engineer and Environmental field. An overview of the environmental field, its current status, domestic qualification items and training conditions in environment-related areas, laws of environmental field, and data of the job analysis were reviewed. The concrete and extensive development plans for the qualification system of the Environmental field are as follows: First of all, a job analysis should be made of on the introduction of new systems or policy modification to reflect technical changes and national policies about the environmental field in the qualification exam. Second, it is essential to prepare policies that are suitable for the qualification system in the Environmental field and that improve its effectiveness. Third, the appropriate policy measures should be taken in order to elevate the social standing of Environmental field qualification holders.

• Structural Engineering and Mechanics
• /
• v.19 no.1
• /
• pp.97-106
• /
• 2005

The standard practice is to seismically qualify the safety related equipment and structural components used in the nuclear power plants. Among several qualification approaches the qualification by the analysis using finite element (FE) method is the most common approach used in practice. However the predictions by the FE model for a structure is known to show significant deviations from the dynamic behaviour of 'as installed' structure in many cases. Considering such limitation, few researchers have advocated re-qualification of such structures after installation at site to enhance the confidence in qualification vis-$\grave{a}$-vis plant safety. For such an exercise the validation of FE model with experimental modal data is important. A validated FE model can be obtained by the Model Updating methods in conjugation with the in-situ experimental modal data. Such a model can then be used for qualification. Seismic analysis using the updated FE model and its advantage has been presented through an example of an in-core component - a perforated horizontal tube of a nuclear reactor.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.601-613
• /
• 2011

This study is focused on a climate data integrity to improve water quality assessment due to the social development projects. The study is in an attempt to calculate both extreme ranges of weather data measurements and partly provide means to assess qualification of data which fall within the extremes at the 23 meteorological weather stations. Generally speaking, maximum temperature, minimum temperature, relative humidity, dew point temperature are in the range of reasonable accuracy. However, there found some outliers of the brightness sunshine hours in Cheonan station. Also some years in Gwangju, Seoul, Wonju, Busan, and Jeju never reach to their upper limit and perhaps the calibration of the equipment is doubtful. The users need to take cautions in using the brightness sunshine hour data in preparation of water resources planning and management by estimating evapotranspiration and river discharge, and/or growth rate of the algae (phytoplankton).

• Toxicological Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2009

Validation specifies and coordinates all relevant activities to ensure compliance with good laboratory practices (GLP) according to suitable international standards. This includes validation activities of past, present and future for the best possible actions to ensure the integrity of non-clinical laboratory data. Recently, validation has become increasingly important, not only in good manufacturing practice (GMP) institutions but also in GLP facilities. In accordance with the guideline for GLP regulations, all equipments used to generate, measure, or assess data should undergo validation to ensure that this equipment is of appropriate design and capacity and that it will consistently function as intended. Therefore, the implantation of validation processes is considered to be an essential step in a global institution. This review describes the procedures and documentations required for validation of GLP. It introduces basic elements such as the validation master plan, risk assessment, gap analysis, design qualification, installation qualification, operational qualification, performance qualification, calibration, traceability, and revalidation.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.213-220
• /
• 2008

The purpose of this paper is to improve efficiency in the construction and operation of a total management system for the national technical qualification through the design and development of a real-time data sharing system which is connected with the management system of external consignment. The current a total management system for the national technical qualification precesses the work depend on information and results which pass over by external IT company. But this method of processing has some unstable elements with regards to information reprocessing, functional supplement, system stability, etc. The proposed system's technological concepts have been tested through a basic simulation pilot program. The pilot program will be expanded to include the local Chamber of Commerce and Industry because the stability of the system was proved through its application to the real-time national technical qualification examination of KCCI(Korea Chamber of Commerce and Industry). The real-time data sharing system has shown great efficiency in terms of system management, and has solved problems of developmental period for information reprocessing and functional supplement. The real-time data sharing system has been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.119-125
• /
• 2001

This paper discuss the Qualification Test Procedure which is composed of main functional and environmental tests for the localizing avionics and subsystems, especially the detail test approaches of General Avionics Computed(GAC) through the analysis of related technical data packages for the purpose of performance proof of final products. Quality assurance procedures are properly established with the several kinds of inspections and functional test items. They are called as process inspections, functional test, acceptance test procedure and qualification test procedure. The Qualification test procedure are composed of the analysis of original engineering design concept and shall be performed for the acquisition of the certification of the GAC's quality as well as the aquisition of the related techniques and engineering know-how items.