• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.589-602
• /
• 1998

While ATM technology results in considerable advantages(less overhead, increased throughput) in an optical networks, It causes severe problems(single and burst error) when ATM is transmitted over an error-prone channel, such as wireless link. In this paper we describe our investigation on ATM over wireless network. we first evaluate performance of ATM data transmission over a wireless link. Secondly we analyze performance improvements of Forward Error Correction(FEC) or ARQ(Automatic Repeat reQuest) scheme applied to wireless ATM link and provide performance comparison between FEC and ARQ through the use of packet error rate and throughput. Lastly we suggest error control architecture to overcome the impact of the bit error characteristics of a wireless link on wireless ATM network.

• Journal of Korea Game Society
• /
• v.16 no.4
• /
• pp.57-68
• /
• 2016

As the size of the data used in the game application increase gradually, the physical resources of game server grow. Accordingly, it is necessary to/it is required to introduce I/O virtualization in game server to improve I/O performance of the server. But it is difficult to ensure high responsiveness in game server where I/O delay change from time to time. To maximize the benefit of I/O virtualization, guaranteeing I/O response time is very important and it is necessary to have I/O scheduling techniques to manage the I/O latency in the order of priority of virtual machines. In this paper, we propose an efficient delay-constrained scheduling algorithm in a virtualization environment to ensure maximum I/O latency. In addition, a reduced amount of loss of the packet was found to increase the fairness of scheduling in the experiments with the proposed scheme.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.703-713
• /
• 2015

The linking system between the control system and the field devices in the existing EMS/SCADA, in order to increase the reliability of the data, and access control through the separation of external network. Currently, There is a tendency that the need for connection to an external network that takes into account the economic aspect, systematic management and efficiency of operations is increasing. Such is evolved linkage section, is to have more security vulnerabilities than in the past, Eventually communication EMS/SCADA linkage section requires special management method. In this paper, taking into account the domestic environment, were presented the security Certification and Accreditation technology that was applied to serial DNP3 and TCP/IP based DNP3 that are mainly used in EMS/SCADA linkage section. Presented to security of Certification and Accreditation technology, divided into Resource Robustness Test and Malicious Packet Test for evaluate the safety. Each of the security requirements and evaluation method in proposed technology, is an attempt to present the differentiation of the existing Certification and Accreditation technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.858-861
• /
• 2002

As mobile devices have become widely popular, users want to use devices not only wireless but also mobile. Mobile IP is used to support mobility on TCP/IP network. In mobile IP, when a terminal changes location, the terminal requests a registration to Home Agent through Foreign Agent in new location. After the request is accepted by Home Agent, the terminal can use network again. We call this process as handoff. In mobile n, handoff provokes loss of data packets and network delay. In this paper, we describe the implementation of pre-registration which is a solution of the handoff problems. Pre-registration improves the traditional handoff mechanism by requesting registration through current FA before location change. This muchanism can decrease packet loss and network delay.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.534-543
• /
• 2015

This paper proposes an Energy Theft Traceback Protocol(ETTP) based on Logging and Marking that can trace Energy Theft back in Smart Grid Environment. The ETTP consists of the following three phases. First, it classifies Energy Theft Type into Measurement Rejection and Data Fabrication by generating an Energy Theft Tree. Second, it detects an Energy Theft by using the Energy Theft Tree. Finally, it trace an Energy Theft back by using the Logging Table of a Router and the Marking Information of a Packet. The result of its simulation shows that the Detection Ratio of Energy Theft is estimated at 92% and the Success Ratio of Energy Theft Traceback at 93%. Therefore, the ETTP not only reduces such risk factors as Forgery and Tampering about Billing information but also provides safe and reliable Smart Grid environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.45-54
• /
• 2003

In the Protocol-Independent Multicast Sparse Mode(PIM-SM), we need a careful selection scheme for the Rendezvous Point(RP) which influences much on the QoS due to the delay among multicast group members and packet loss The QoS based RP selection schemes choose RPs which satisfy the restriction conditions such as bandwidth, delay, and other QoS parameters In this paper, we propose a new RP selection scheme which is a variation of the group-based RP selection scheme The new algorithm, MCT(Maximum Cross Tree), is implemented by taking advantages of the topology-based selection scheme and the group-based selection scheme as well In order to verify the proposed algorithm, we first measure the multicast traffic data of the Virtual Conference System implemented on the IPv6 network via KOREN, then expand the results to two types of network models and analyze the performance by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.191-197
• /
• 2008

For the efficient transmission of burst data in the time varying wireless channel, opportunistic scheduling is one of the important techniques to maximize multiuser diversity gain. In this paper, we propose a distributed opportunistic scheduling scheme for wireless LAN network. A proportional fair scheduling, which is one of the opportunistic scheduling schemes, is used for centralized networks, whereas we design distributed proportional fair scheduling (DPFS) scheme and medium access control with distributed manner. In the proposed DPFS scheme, each receiver estimates channel condition and calculates independently its own priority with probabilistic manner, which can reduce excessive probing overhead required to gather the channel conditions of all receivers. We evaluate the proposed DPFS using extensive simulation and simulation results show that DPFS obtains higher network throughput than conventional scheduling schemes and has a flexibility to control the fairness and throughput by controlling the system parameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1305-1313
• /
• 2010

Last few years, wireless personal area network (WPAN) has been widely researched for various healthcare applications. Due to restriction of device hardware (e.g., energy and memory), we need to design a highly-versatile MAC layer protocol for WBAN (Wireless Body Area Network). In addition, when an emergency occurs to a patient, a priority mechanism is necessitated for a urgent message to get through to the final destination. This paper presents a priority mechanism referred to as hybrid priority MAC for WBAN. Through extensive simulation, we show the proposed MAC protocol can minimize the average packet latency for urgent data. Thus, when patients have an emergency situation, our MAC allows adequate assistance time and medical treatment for patients. The simulation based on NS-2 shows that our Hybrid Priority MAC has the good performance and usability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4B
• /
• pp.227-233
• /
• 2007

According to the recent development of network technology, the demands of users are diversified and the needs of multimedia traffic are increasing. In general, UDP(User Datagram Protocol) traffic is used to transport multimedia data, which satisfied the real-time and isochronous characteristics. UDP traffic competes with TCP traffic and incur the network congestion. However, TCP traffic performs network congestion control but does not consider the receiver's status. Thus, it is not appropriate in case of streaming services. In this paper, we solve a fairness problems and proposed a network algorithm based on RTP/RTCP(Real-time Transport Protocol/Realtime Transport Control Protocol) in view of receiver status. The POBA(Priority Ordered Buffer Algorithm), which applies priorities in the receiver's buffer and networks, shows that it provides the appropriate environment for streaming services in view of packet loss ratio and buffer utilization of receiver's buffer compared with the previous method.