• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.746-755
• /
• 2009

Recently, NMEA2000 became the de facto standard of the communication protocol for the instrument level network in vessels, and it is anticipated that most of the vessels will be equipped with the sensors and actuators based on this protocol. The conventional serial communication specifications such as RS-232, RS-485, or even NMEA0183 are single-talker/multiple-listener and interconnection among multiple sensors and/or actuators usually results in a bundle of wires. On the other hand, NMEA2000 is a true bus type(multiple-talker/multiple-listener) protocol and theoretically up to 256 instruments can be hot-plugged. With the advent of the protocol, it is necessary to consider a new type of monitoring system for the instruments in vessels: In most traditional serial communication environments, a dedicated monitor or user interface was necessary for each sensor or actuator as it was simply not easy to collect data in a single place. With NMEA2000, the collection of various types of information is simple. An embedded system can be employed to combine, to arrange and to display informations from various types of devices. Assuming that the actuators and sensors on a vessel are interconnected by NMEA2000 standard, we devise a tentative interactive vessel monitoring system in which the following 4 kinds of informations are collected and delivered: the navigation, engine, weather and tanks informations.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.172-179
• /
• 2017

The regional trauma center should be a trauma treatment center equipped with facilities, equipments, and manpower capable of providing optimal treatment from emergency surgery to a severely traumatized patient upon arrival at the hospital. In order to establish a medical system for effective severe diseases, it is necessary to prepare architectural planning guidelines for the regional trauma centers. This study analyzes the connectivity, control, integration, and mean depth of current trauma centers using the convex map of space syntax, And to provide basic data for building for more efficient regional trauma center. The major areas that must be included in the regional trauma center are trauma resuscitation room, trauma operating room, trauma intensive care unit, and trauma general ward. It is necessary to carry out the architectural planning to increase the interconnection of the four areas. Also, the elevator plan for trauma patients should be emphasized. In addition, a regional trauma center should be separated from the existing facility for independent operation. According to the case analysis of the space configuration of the regional trauma center, the location of the operating room is most important considering the connection with each department of the hospital and the treatment flow of the severe trauma patients.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.217-219
• /
• 2016

The Internet of Things (IoT) is the interconnection of uniquely identifiable embedded computing devices within the existing Internet infrastructure. IoT is expected to offer advanced connectivity of devices, systems, and services that goes beyond machine-to-machine communications and covers a variety of protocols, domains, and applications. Time information is a critical piece in the IoT to support its requirements. This paper reviews conventional time keeping mechanisms in the Internet and presents issues to be considered for combining time and data in the IoT.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.75-80
• /
• 2017

The use of optical fiber makes it possible to transfer a large amount of data, thereby enabling a high-speed image transmission with a high response speed and a large number of frames. The need for an optical fiber HDMI System has grown in importance due to the rapid development of displays with large sizes and high-resolution images. In this paper, we have studied the structural design and FEM analysis of a 4C fiber guide for hybrid interconnection implementation. According to the structural analysis of the fiber guide, we have confirmed the safety of the design and we will make additional design changes to minimize the optical loss and fabricate a fiber guide for photoelectric composite HDMI in the future.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.6
• /
• pp.70-76
• /
• 2013

Recently industrial control systems have been required to ensure intelligent, high tech automation, interconnection and interoperability demands. Therefore, there is a need to redefine the structure concepts of SCADA system for wind power. Also, at this time, the integrated management system is required for the distributed development of wind farms where are needed often interoperability features and exchange information between different wind farms, wind turbines or SCADA systems. In this paper, an integrated structural concepts for SCADA system are defined. Based on this definition of an integrated SCADA system, the basic designs are analyzed on physical layer, system layer and application layer which are corresponded to wind turbine controller, the SCADA server and the SCADA client, and implement HMI. Between the implementation SCADA server and the client, their normal functions were verified at the small scale wind energy test facilities.

• Journal of Aerospace System Engineering
• /
• v.1 no.4
• /
• pp.13-21
• /
• 2007

As one of YHF digital data link technologies, VDL Mode 2 is designed to be an air-to-ground subnetwork of the Aeronautical Telecommunication Network (ATN) based on the Open System Interconnection (OSI) architecture. VDL Mode 2 can be used in ATS Applications especially for CPDLC and ADS. And it is also expected to replace ACARS (Aircraft Communications Addressing and Reporting System) which has broadly been used in AOC for over 20 years. This paper presents the design result of VDL Mode 2 system under AOA (ACARS Over AVLC) environment for the implementation of bit-oriented ATS applications. The system is composed of airborne and ground subsystem. Airborne subsystem consists of VDR, CMU and an aircraft test equipment with CPDLC/ADS client applications for operational test and ground system consists of Ground Station which includes ground VDR and ground communication controller, simple DSP (Datalink Service Processor) and a ground test equipment with CPDLC/ADS server applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.437-444
• /
• 2010

The audio data have been communicated using analog methods or simple protocols. However, with the advent and improvement of various multimedia functions, many audio devices have been integrated into a mobile handset in which interconnection lines are very complicated. Conventional point-to-point connections such as $I^2S$ and PCM demand more power consumption whenever more devices are attached. In this paper, we design a common bus digital audio interface that communicates with only two wires and employs the clock gear method to reduce bus power consumption. The comparison results show that the proposed common bus connection can reduce more than 30% of power consumption as compared with point-to-point connection if more than three devices are connected.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.93-99
• /
• 2021

The government has proposed a mission to enhance intelligent power networks, decrease coal-fired generation, expand distributed energy resources, and promote energy prosumer into the distribution network in Korea. Installation cost of facility expansion to guaranteed interconnection with small distributed energy resources increases dramatically on KEPCO's distribution sector. And it is hard to withdraw in time. In addition, there are explicit research is required to meet the reliability on grid corresponding to the increase of distributed power. Infrastructure support for accommodating energy prosumer is also needed. Therefore, KEPCO is pushing transition to DSO by expanding distribution management scope and changing its roles. In addition, KEPCO is proactively preparing for integrated operation between distribution network and existing distributed power which is accommodated passively. KEPCO is also trying to accept multiple network users, e.g. building platforms, to manage a data and promote new markets. In the long term, transition to DSO will achieve saving investment costs for accommodating distributed sources and maintaining stable electrical quality. And it will be possible to create new business model using the platform to secure revenue.

• Asia-Pacific Journal of Business
• /
• v.12 no.2
• /
• pp.25-37
• /
• 2021

Purpose - This study analyzes the situational relationship between the components of job crafting and innovation performance, and based on this, suggests practical alternatives to the effect of the control variables of organizational support. Design/methodology/approach - For this survey, 350 questionnaires were distributed to Korean SME workers from October 5, 2020 to March 20, 2021, and 230 questionnaires were collected. In order to check the validity of the questionnaire, the questionnaire judged to be inappropriate in response was excluded. The recovery rate was 65.7%, and the effectiveness of the questionnaire was 82%. Structural equation model and hierarchical regression analysis are used to analyze those data. Findings - First, job enhancement through job redesign as well as organizational support is a key task in order to expect innovative results from field members. Innovative performance is not created by individual jobs, but is created between jobs and jobs, tasks and tasks, teams and teams, and departments and departments. This is why it is worth paying attention not to the functional approach, but to the interconnection structure of the process. Research implications or Originality - In this study, it was analyzed that structural job resource increase and social job resource increase, which are components of job crafting, had a positive effect on innovation performance, and that challenging job will had no significant effect. Challenging work will itself does not negatively affect innovation performance. Combining the survey and interview, field members who make up the majority of respondents say that they do not lack the will to work. They claim that there is no channel or opportunity to express or practice a challenging will.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

A systolic array formed by interconnecting a set of identical data-processing cells in a uniform manner is a combination of an algorithm and a circuit that implements it, and is closely related conceptually to arithmetic pipeline. High-performance computation on a large array of cells has been an important feature of systolic array. To achieve even higher degree of concurrency, it is desirable to make cells of systolic array themselves systolic array as well. The structure of systolic array with its cells consisting of another systolic array is to be called super-systolic array. This paper proposes a scalable bit-level super-systolic amy which can be adopted in the VLSI design including regular interconnection and functional primitives that are typical for a systolic architecture. This architecture is focused on highly regular computational structures that avoids the need for a large number of global interconnection required in general VLSI implementation. A bit-level super-systolic FIR filter is selected as an example of bit-level super-systolic array. The derived bit-level super-systolic FIR filter has been modeled and simulated in RT level using VHDL, then synthesized using Synopsys Design Compiler based on Hynix $0.35{\mu}m$ cell library. Compared conventional word-level systolic array, the newly proposed bit-level super-systolic arrays are efficient when it comes to area and throughput.