• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권4호
• /
• pp.303-317
• /
• 2009

There are a lot of different data in a company. Some of the data can be modified to produce valuable information on reliability. In this study different types of data that can be obtained in a company are reviewed. Reliability related data that can be taken throughout the life cycle of a product are also reviewed. Developing a method of gathering all of the pertinent data from the various sources and databases and pulling them into one central location is explained.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• 한국콘텐츠학회논문지
• /
• 제8권1호
• /
• pp.186-194
• /
• 2008

본 논문에서는 인체의 심전도를 측정하여 언제 어디서나 환자의 건강상태를 체크할 수 있는 유비쿼터스 헬스 케어 시스템을 구현하였다. 구현된 시스템은 심전도 측정 단말기, 자료 수집 베이스 노드, 의료 정보 수집 서버로 구성된다. 구현된 단말기는 지그비(Zigbee) 프로토콜을 통하여 센서 네트워크를 구성하며 TinyOS가 내장되어 있는 초소형 보드로 설계되었다. 자료 수집 베이스 노드는 무선 리눅스 단말기로 구성되어 서버로 무선 랜을 통하여 센싱된 정보를 실시간으로 전송한다. 또한 의료 정보 수집 서버는 단말기에서 얻은 데이터를 저장 관리하며 긴급 상황 발생 시 연계된 의료진에게 환자의 상태를 보고하도록 설계되었다. 실험 결과 지그비 통신 프로토콜을 이용한 센서 네트워크를 통하여 유비쿼터스 헬스 케어 시스템이 구현 가능함을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제11권6호
• /
• pp.143-150
• /
• 2006

본 논문에서는 인체의 혈압을 측정하여 언제 어디서나 환자의 건강상태를 체크할 수 있는 유비쿼터스 헬스 케어 시스템을 구현하였다. 구현된 시스템은 혈압 측정 단말기 자료 수집 베이스 노드, 의료 정보 수집 서버로 구성된다. 구현된 단말기는 지그비(Zigbee) 프로토콜을 통하여 센스 네트워크를 구성하며 TinyOS가 내장되어 있는 초소형 보드로 설계되었다. 자료 수집 베이스 노드는 무선 리눅스 단말기로 구성되어 서버로 무선 랜을 통하여 센싱된 정보를 실시간으로 전송한다. 또한 의료 정보 수집 서버는 단말기에서 얻은 데이터를 저장 관리하며 긴급 상황 발생 시 연계된 의료진에게 환자의 상태를 보고하도록 설계되었다. 실험 결과 지그비 통신 프로토콜을 이용한 센스 네트워크를 통하여 유비궈터스 헬스 케어 시스템이 구현 가능함을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제10권2호
• /
• pp.123-128
• /
• 2010

최근, 유비쿼터스 관련 산업이 비약적으로 발전하고 있으며, 특정 구역을 대상으로 유비쿼터스 환경을 구축하는 u-Zone의 개발이 추진되고 있다. 특히 헬스케어 시스템의 관점에서 보면, u-Zone을 활용하여 정신질환자나 거동이 불편한 환자를 관리하기 위한 비용과 노력을 감축시킬 수 있다. 하지만 아직 헬스케어 시스템은 특정 개인을 대상으로 하거나 병원 내부 시스템을 확장하는 수준에 그치고 있다. 정신질환자 중에는 알코올, 마약 등의 약물에 중독된 환자의 비율이 높지만, 일상적인 데이터의 수집이 어려워 체계적인 관리나 정확한 진단이 어렵다. 따라서 본 논문에서는 u-Zone 내에서 중독환자에게 생체신호 측정 센서를 통해 지속적인 정보를 수집하고, 모니터링할 수 있는 시스템을 제안하였다. 맥박, 체온, 가속도 센서를 이용하여 환자 상태정보를 수집하고, 이를 기반으로 감정 상태를 판별하여 정확한 진단의 근거가 될 수 있도록 한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.405-411
• /
• 2020

In this paper, we designed the COS MEMS system for sensing the falling detection and explosive noise of fuse link in COS (Cut Out Switch) installing on the power distribution. This system analyzed the failure characteristics and an instantaneous breakdown of power distribution. Therefore, our system strengths the industrial competence and guaranties the stable power supply. In this paper, we applied BLE (Bluetooth Low Energy) technology which is suitable protocol for low data rate, low power consumption and low-cost sensor applications. We experimented with LSM6DSOX which is system-in-module featuring 3 axis digital accelerometer and gyroscope boosting in high-performance mode and enabling always-on low-power features for an optimal motion for the COS fuse holder. Also, we used the MP34DT05-A for gathering an ultra-compact, low power, omnidirectional, digital MEMS microphone built with a capacitive sensing element and an IC interface. The proposed COS MEMS system is developed based on nRF52 SoC (System on Chip), and contained a 3-axis digital accelerometer, a digital microphone, and a SD card. In this paper of experiment steps, we analyzed the performance of COS MEMS system with gathering the accelerometer raw data and the PDM (Pulse Data Modulation) data of MEMS microphone for broadcasting the failure of COS status.

• 수산해양교육연구
• /
• 제25권3호
• /
• pp.677-689
• /
• 2013

Recently, the supplying of basic materials for construction of building as sand is big issues due to lack of shoreside supply. For solving this problem, many suppliers attempt to gather aggregate from the sea bottom of the EEZ & west coastal area of Korea. In this regard, the 'Jangantoe' which exists in the westside of the Daesan port is worth noticing as good seasand supplying areas. The Chungnam Aggregate Association have plan to gather of seasand from 'Gaduckdo 5 regions & Igok 3 regions' which lies westside about 6 miles off from the Jangantoe areas. This designated area also locates upper parts of the Gadaeam TSS(Traffic Separation Scheme) which is very useful passing routes for the sailing vessels of Inchon & Daesan ports. In this study, the evaluation of the safety for passing vessels in the vicinity of the seasand gathering area was performed by various methods of radar observations & GICOMS AIS data for marine traffics and vessel traffic-flow simulation of the 'Marine Traffic Safety Diagnostic Scheme'. By the results of this evaluation, I suggested comprehensive countermeasures for the safety of passing vessels in the near the seasand gathering area.

• 정보관리학회지
• /
• 제13권1호
• /
• pp.83-101
• /
• 1996

본 연구는 문헌정보학 연구자들의 인용문헌 수집경로와 자료 수집행태에 대한 분석을 위하여 수행되었다. 연구방법으로 인용문헌 수집경로 확인과 형태 분석을 위한 데이터 수집을 위해 질문지 조사방법을 이용하였고 통계분석은 SPSS프로그램을 이용하였다. 데이터 분석을 통하여 설정된 가설을 검증하였고, 상관관계분석, 그리고 기술통계에 의한 경향분석을 실시하였다. 연구결과로 설정된 가설에서는 연구가설이 채택되었고, 연구경력 및 논문편수와 수집경로 간의 상관관계는 유의하지 않았다. 또한 연구자 상호간 정보자료 교환 이용과 연구진행 정보의 공개 및 정보교환에 대해서는 연구자 대부분이 긍정적으로 동의하였다.

• 한국멀티미디어학회논문지
• /
• 제12권12호
• /
• pp.1778-1786
• /
• 2009

Many sensor network applications have been developed for smart home, disaster management, and a wide range of other applications. These applications, however, generally assume a fixed base station as well as fixed sensor nodes. Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, sink mobility is one of the most comprehensive trends for information gathering in sensor networks, but the research of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a scheme for context-aware by ubiquitous devices with the sink functionality added through fixed sinks under a previously-built, cluster-based multi-hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously-built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was confirmed that performance increases by average 50% in energy with the number of mobile sinks, and with the number of movements by mobile devices.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.315-327
• /
• 2023

In South Korea, the exporters of items related to nuclear power generation are diversified. Consequently, there is a risk of illegitimate export by companies failing to recognize the export control system because the awareness about this system for the strategic items among the subcontractors of nuclear power facilities is limited. To prevent illegitimate export of the strategic items, it is necessary to conduct outreach activities regarding the export control system for the related companies. Additionally, the exporters and export license examiners should consider whether an export target is on the Denial List, who may divert the strategic items to weapons of mass destruction. Therefore, the Korea Institute of Nuclear Nonproliferation and Control developed two systems for controlling illegitimate export of the Trigger List items. The first system, Nuclear Industry Information Collection and Analysis System, can gather information about the key nuclear industries in Korea and analyze the dealing of strategic items. The second system, Denied Persons Information Gathering System, can regularly gather information about the denied persons and provide the updated data to the exporters and regulatory examiners. These two systems can be used for outreach activities and export license examination to prevent illegitimate export of the strategic items.