• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.118-123
• /
• 2020

In this paper, the design method of asynchronous nonvolatile memory module that can efficiently process and store large amounts of data without loss when the power turned off is proposed and implemented. PSRAM, which takes advantage of DRAM and SRAM, was used for data processing, and NAND flash memory was used for data storage and backup. The problem of a lot of signal interference due to the characteristics of memory devices was solved through PCB design using high-density integration technology. In addition, a boost circuit using the super capacitor of 0.47F was designed to supply sufficient power to the system during the time to back up data when the power is off. As a result, an asynchronous nonvolatile memory module was designed and implemented that guarantees reliability and stability and can semi-permanently store data for about 10 years. The proposed method solved the problem of frequent data loss in industrial sites and presented the possibility of commercialization by providing convenience to users and managers.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.65-70
• /
• 2017

This paper presents the implementation for the master changing algorithm between nodes in a general electric vehicle. The packet processing method based on the unique network method of an electric vehicle is that the method of processing a communication packet has the priority from the node of a vehicle installed at both ends. An important factor in deciding master or slave in a train is that the request data, the status data, and transmits or control codes of sub-devices are controlled from the node which master becomes. If the request data or the status data is transmitted from the non- master side, it is very important that only one of the devices of both stages be master since the data of the request data may collide with each other. This paper proposes an algorithm to select master or slave depending on which vehicle is started first, which node is master or slave, and whether the vehicle key is operation. Finally experimental results show the stable performance and effectiveness of the proposed algorithm.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.284-295
• /
• 2008

For plastics samples, a method using combustion ion chromatography was selected as a method for rapid low-cost analysis to test whether hazardous substances are contained or not. Using combustion ion chromatography, a verification test for F, Cl and Br compounds generated a linear calibration curve with a correlation coefficient of $r^2$ = 0.999~1.000 in the calibration range from 0.5 to 4.0 mg/kg. The detection limits were found to be 0.005~0.024 mg/kg and quantitative limits were found to be 0.014~0.073 mg/kg. The recoveries of combustion ion chromatography using certified reference material (CRM) were found to be 95.5~104.9%. Based on these results, a proficiency test was conducted together with several laboratories in and out of the country, to make comparative analysis of the results from each laboratory. As a result, the data supported the use of combustion ion chromatography as an effective analysis method to deal with regulations for halogen-free electronic products and for other hazardous substances in the electronic products.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.365-368
• /
• 2004

We present a family of elaborate numerical models for simulation and systematic optimization of complex LCDs for demanding applications (e.g. LCD-TV). These numerical models comprise modules for solving LCD-related problems in one, two and three dimensions. The three modules feature an intuitive graphical user surface for a jump-start into modeling, a common database for a range of materials and components as well as sophisticated and proven algorithms with more than 15 years of reliable performance in the LCD-industry. Methods for obtaining data required for the modeling of key components are presented.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.417-420
• /
• 2001

The monitoring system for maintaining on-site wastewater treatment plants(Biofilter) was developed. Proposed system applied PLC(Programmable Logic Controller) technique. In process of development, the research against the monitoring parameters which will be able to represent condition and operation of the plants was accomplished. These parameters are ORP(Oxidation-Reduction Potential), Water Level, Pump and Power on/off. Also, to measure, collect, transfer and display these parameters, DMU(Data Measurement Unit), MCU(Main Controller Unit) and Display Board were produced.

• Information Display
• /
• v.4 no.4
• /
• pp.14-19
• /
• 2003

CRT용 Glass 산업의 경우, 금형 및 유리의 온도는 매우 중요한 변수이다. 이 온도는 상온에서 출발한 금형이 반복되는 Heat Cycle을 거치면서 안정화 상태로 이르게 되는 과정을 거치면서 결정된다. 이때 안정화되는 금형의 온도분포에 의해 제품의 품질이 결정됨에 따라, 불량이 발생할 경우, 안정화 시간 및 금형수정 Cost 증가 등 매우 큰 손실이 야기된다. 이에 본 연구는 CAE를 통하여 상기 Heat Cycle의 해석과정 중에서, I-DEAS의 MACRO인 "Program file"을 이용하여 Modeling 및 Meshing을 수행하여 단시간 내 정확한 Preprocessing을 통해 유동 및 열 해석에 적용하는 자동화 프로그램을 개발하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.685-688
• /
• 2008

Mini-LVDS has been widely used for high speed data transmission because it provides low EMI and high bandwidth for display driver. In this paper, a Mini-LVDS output buffer with LTPS TFT process is presented which provides sufficient performance in the presence of large variation in the threshold voltage and mobility and kink effect.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1682-1686
• /
• 2006

The Gaussian thickness profiles in metal plate evaporation using LPS sources have been studied for the first time. Based on our experimental data, it simulates the organic thin-film uniformity of 3% and very high material usage of 81% for large size AMOLED manufacturing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1029-1032
• /
• 2005

A 262K-color QVGA LTPS AMLCD was developed. This panel has integrated gate driver and data multiplexer (1:3) by p_Si LTPS TFT process. The commercialized driver IC was adopted to implement this display. Fine image quality, low powerconsumption and cost-efficiency feature make the panel be suitable for mobile application.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.343-346
• /
• 2003

In this paper, we try to make a systematic analysis for the vertical crosstalk on LCD driving. The vertical Crosstalk is one of the inevitable phenomena in the high-resolution TFT-LCDs. At first, the vortical Crosstalk is defined. Considering the structure of the pixels and data lines, a LCD (a pixel) is modeled electrically by its' equivalent circuit. The circuit is verified by experiment and used to find the cause of the vertical Crosstalk.