• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.81-87
• /
• 1988

This paper proposes a new EBTC(extended block truncation coding) algorithm extended from the BTC for image compression. The EBTC has a capability to eliminate the defects of BTC, such as the deterioration of resolution or blocky effect,and to make a real-time processing like BTC. It shows better performances than the DPCM and the transform coding. Especially, it is a suitable coding method for the high quality picture transmission. It may be adequate to the system of transmission rate of 30-50 Mbits/sec. The picture quality has been scarecely degraded with a vector quantization to the EBTC output at the bit rate of 1.25 bits/pel. The bit rate of the scalar quantized EBTC method is 2.6-3.7 bits/pel.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.544-549
• /
• 1997

Injector of high voltage or linear ion accelerator is intended to generate, extract and form beam of certain species with required parameters at the entrance of accelerating structure or, for low energy case, directly in the processing chamber (end station). Injector is the main part defining the ion accelerator performance and reliability. Its power supply and control system (PSCS) features are conditioned by placing the injector equipment at high voltage potential and by complexity of the plasma-beam load. The injector's PSCS should provide: - Transmission of electric power onto high voltage (h/v) terminal; - Obtaining of required output characteristics for injector equipment operation; - Transmission of the operational data and start/stop signals from h/v terminal to control cabinet; - Rremote control of injector; - Withstanding the high voltage breakdowns and X-ray radiation; - Compatibility with other equipment. The paper is concerned with analysis of injectors' PSCS structure and description of the system developed for 50 keV, 20 mA heavy ion injector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.1
• /
• pp.63-71
• /
• 1987

The measuring of acoustic intensity has been investigated by many researchers and practicians during the last several decades. But due to the lack of measurement accuracy, they have had no practical use. In recent years, the two microphone acoustic intensity method has been developed by the advancement of FFT analysis technique and the digital data processing equipment. This new method of using two microphones gives informations on the noise source survey and the acoustic power of sound radiation source without the anechoic room. In this paper, theoretical formulae for the two microphone acoustic intensity method and the sound transmission loss are checked. The obtained results for the acoustical enclosure of gas heat pump were compared with the classical field incidence mass law. The surface vibration modes for a panel of enclosure were also estimated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1403-1410
• /
• 1997

Because streaming mode connection server suitable to wide area ATM networks performs transmission, reception and lookup with time restriction for the transmission time of a cell, it has demerits of large cell loss incase that burst traffic occurs. Therefore, in this paper to decrease cell loss we propose a high speed CAM (Content Addressable Memory) which is capable of processing data of streaming mode connections server at a high speed. the proposed CAM is applied to forwarding table VPC map which performs function to output connection numbers about input VPI(Virtual Path Identifier)/VCI(Virtual Channel Identifier). The designed high speed CAM consist of DBL(Dual Bit Line) CAM structure performed independently write operation and match operation and two-port SRAM structure. Also, its simulation verification and full-custom layout is performed by Hspice and Composs tools in 0.8 .$\mu$m design rule.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.30-39
• /
• 1998

Currently, LAMA(Local Automatic Message Accounting) is a billing mechanism which is being used for billing process, in which billing dat is written on MT(Magnetic Tape), collected at each regional billing center and then processed once a month. However, in order to prepare further development of telecommunication network and future new services, computerization of billing process and new daily billing processing system are urgently needed. Therefore Korea Telecom had developed a CAMA (Centralized Automatic Message Accounting) system for M10CN switch. In the CAMA system, billing data generated in switches is transfered on-line using approproate protocols and various transmission media and immediately processed. The CAMA system for M10CN switch consists of three parts such as ED (Extraction Device), TD(Transmission Device) and HC(Host Collector). The system also has redundancy to maintain continuance and confidence of system operation.

• Journal of the Korean Institute of Navigation
• /
• v.5 no.2
• /
• pp.41-47
• /
• 1981

Many new radar techniques have appeared on the electronic scene in recent years, such as a variety of automatic computer processing. However, even with the advent of these sophisticated radar techniques, an old problem continues to plague all radars: the problem of transmission line losses. With the higher performance required today, the Waveguide testing and trouble-shooting techniques remain essentially unchanged in principle. This paper dealt with the rf pulse "Time-domain Reflectometry" to inspect radar wave-guide system and compared with the conventional methods. During the investigation, it was verified that the pulsed TDR for wave-guide is superior to the conventional methods; 1. Disassembling is not needed to locate the discontinity points and measure the reflections of trobled points. 2. The results of the data are more precise. 3. The condition of individual component is able to the photographed and recorded permanently. 4. Since rf pulse TDR is based on the well-known basic radar principle, such a test set requires the minimum of training to operate. With the level of transmission line problems, the prospect of increasing complexity of equipment, and no relief in sight, the benifits must be emphasizied to adopt such a testing procedure.procedure.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.1-8
• /
• 2008

The USN is important in technique, unmanned observation using wireless network camera, detection technique that use intrusion detection sensor. But these encrypted data transmission and processing technique through sensor network, method of the staff's location recognition and arrangement aren't serviced still as a integrated system in facility security industry. This paper proposed that improve facility management, the staff present recognition and system efficiency using RFID, USN and wireless camera.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.733-741
• /
• 2020

A smart dust monitoring system is useful for obtaining information on rough terrain that is difficult for humans to access. One of ways to deploy sensors to gather information in smart dust environment is to use an aircraft in the Amazon rainforest to scatter an enormous amount of small and cheap sensors (or smart dust devices), or to use an unmanned spacecraft to throw the sensors on the moon's surface. However, scattering an enormous amount of smart dust devices creates the difficulty of managing such devices as they can be scattered into inaccessible areas, and also causes problems such as bottlenecks, device failure, and high/low density of devices. Of the various problems that may occur in the smart dust environment, this paper is focused on solving the bottleneck problem. To address this, we propose and construct a three-layered hierarchical smart dust monitoring system that includes relay dust devices (RDDs). An RDD is a smart dust device with relatively higher computing/communicating power than a normal smart dust device. RDDs play a crucial role in reducing traffic load for the system. To validate the proposed system, we use climate data obtained from authorized portals to compare the system with other systems (i.e., non-hierarchical system and simple hierarchical system). Through this comparison, we determined that the transmission processing time is reduced by 49%-50% compared to other systems, and the maximum number of connectable devices can be increased by 16-32 times without compromising the system's operations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.1-7
• /
• 2009

Nowadays there are many studies and there's huge development about RFID and WSN which have great developmental potential to many kinds of applications. In particular, the healthcare field is expected to could be securing international competitive power in u-Healthcare and combined medical treatment industry and service. More and more real time application apply RFID and WSN technology to identify, data collect and locate objects. Wide deployment of RFID and WSN will generate an unprecedented volume of primitive data in a short time. Duplication and redundancy of primitive data will affect real time performance of application. Thus, emerging applications must filter primitive data and correlate them for complex pattern detection and transform them to events that provide meaningful, actionable information to end application. In this paper, we design a complex event processing system. This system will process RFID and WSN primitive data and event and perform data transformation. Integrate RFID and WSN system had applied each now in medical treatment through this study and efficient data transmission and management forecast that is possible.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.457-459
• /
• 2004

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I & Q) for data processing. The input of CCU is the output of DCSU (Data Compression & Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.