• Advances in nano research
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.79-89
• /
• 2021

In this paper, the fine dust (PM10) and ultrafine dust (PM2.5) measurement platforms are designed to be mobile and fixed using oneM2M, the international standard for IoT. The fine dust measurement platform is composed and designed with a fine dust measurement device, agent, oneM2M platform, oneM2M IPE, and monitoring system. The main difference between mobile and fixed is that the mobile uses the MQTT protocol for interconnection between devices and services without blind spots based on LTE connection, and the fixed uses the LoRaWAN protocol with low power and wide communication range. Not only fine dust, but also temperature, humidity, atmospheric pressure, volatile organic compounds (VOC), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen dioxide (NO2), and noise data related to daily life were collected. The collected sensor values were managed using the common API provided by oneM2M through the agent and oneM2M IPE, and it was designed into four resource types: AE and container. Six functions of operability, flexibility, convenience, safety, reusability, and scalability were analyzed through the fine dust measurement platform design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.125-135
• /
• 2010

Mobile office is becoming common as advances in mobile devices such as PDAs, Smart-phones, or wireless Internet. In this paper, we construct a mobile office environment on a geotechnical information system(GIS). Especially, web services and XML technology combined with SOA (service oriented services) are adopted for various types of mobile devices and services in a minimum cost. Web service and XML can provide an excellent SW reusability, extensibility, and interoperability even for heterogeneous distributed systems. Applications can exploit web services by just knowing server's address. Prototype system integrates a client in Visual Basic.Net and server in Java via the web services and XML data exchange. We verify effectiveness of the approach through the implementation of prototype system.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2012

This paper suggests a system architecture for the advanced meteorological satellite image processing system that is developing by NMSC(National Meteorological Satellite Center). The meteorology satellite image processing system has basically the image acquisition, the image processing, the data management, and the data dissemination functionalities. However, the existing system has some problems with respect to system integration as well as maintenance to accommodate new satellites and/or the new image processing systems for them which will be developed in the near future. To cope with these problems we propose a new system architecture for the advanced meteorology satellite image processing system. To do this we select as the architectural drivers the quality attributes such as modifiability, inter-operability, extendability, reusability, and platform independency and design the architecture to achieve such quality attributes. We expect that the new approach will solve current issues such as system integration, system dependency, or data management problems and will provide easy ways to incorporate new systems and to maintain them.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.71-81
• /
• 2008

In this paper, we propose a novel Globally Asynchronous, Locally Dynamic System(GALDS) bus and demonstrate its performance. The proposed GALDS bus is the bidirectional multitasking bus with the segmented bus architecture supporting the concurrent operation of multi-masters and multi-slaves. By analyzing system tasks, the bus architecture chooses the optimal frequency for each If among multiples of bus frequency and thus we can reduce the overall power consumption. For efficient data communications between IPs operating in different frequencies, we designed an asynchronous and bidirectional FIFO based on an asynchronous wrapper with hand-shaking interface. In addition, since systems can be easily expandable by inserting bus segments, the proposed architecture has advantages in IP reusability and structural flexibility As a test example, a four-segment bus haying four masters and four slaves were designed by using Verilog HDL. We demonstrate multitasking operations with read/write data transfers by simulation when the ratios of operation frequency are 1:1, 1:2, 1:4 and 1:8. The data transfer mode is a 16 burst increment mode compatible with Advanced Microcontroller Bus Architecture(AMBA). The maximum operation latency of the proposed GALDS bus is 22 clock cycles for the bus write operation, and 44 clock cycles for read.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.2
• /
• pp.113-130
• /
• 2004

Most multimedia data contain text to emphasize the meaning of the data, to present additional explanations about the situation, or to translate different languages. But, the left makes it difficult to reuse the images, and distorts not only the original images but also their meanings. Accordingly, this paper proposes a support vector machines (SVMs) and spatiotemporal restoration-based approach for automatic text detection and removal in video sequences. Given two consecutive frames, first, text regions in the current frame are detected by an SVM-based texture classifier Second, two stages are performed for the restoration of the regions occluded by the detected text regions: temporal restoration in consecutive frames and spatial restoration in the current frame. Utilizing text motion and background difference, an input video sequence is classified and a different temporal restoration scheme is applied to the sequence. Such a combination of temporal restoration and spatial restoration shows great potential for automatic detection and removal of objects of interest in various kinds of video sequences, and is applicable to many applications such as translation of captions and replacement of indirect advertisements in videos.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2000

The IP(imaging plate) has been widely used to measure the two-dimensional distribution of incident radiation since it has a high sensitivity, reusability, a wide dynamic range, a high position resolution. Particularly, the easiness of acquiring digitized image using IP poses a strong merit because recent trend of data handling prefers image digitization. In order to test its usefulness in photon beam dosimetry, we measured the off-axis ratio(OAR) on portal planes and percent depth dose(PDD) within a phantom using IP, and compared the results with the data based on EGS4 Monte Carlo particle transport code, ion-chambers, conventional films. For the measurement, we used 6 MV X-rays, various field sizes. As a result, IP showed significant deviation from ion-chamber measurement: a significant overresponse, 100% greater than that of ion-chamber measurement at deep part of the phantom. Filtration of low-energy scattered photons at deep part of the phantom using 0.5 mm thick lead sheets did improve the result, only to the unacceptable extent. However, portal dose measurement showed possibilities of If as a dosimeter by showing errors less than 5%, as compared with film measurement.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.47-62
• /
• 2012

To propagate clinical disease management service, there should be built a ecosystem where service developers, service providers, device suppliers closely cooperate for u-Health platform. However, most u-Health platform is difficult to build an effective ecosystem due to the lack of secure and effective PHR(Personal Health Record) management, the lack of personalized and intelligent service, difficulties of N-screen service. To solve these problems we suggest the CDMP(Chronic Disease Management Platform) architecture. The CDMP is a software platform that provides the core functions to develop the chronic disease management services and performs a hub function for the link and integration rbetween various services and systems. CDMP is SOA based platform that enables a provision of reusability, expansibility and it provides open API where everybody can share information, contents and services easily. CDMP supports the multi platform system foN-screen service and the self management functions via SNS. In this paper, we design and implement the CDMP including PHR service based on hybrid data model for privacy preservation. Experiment results prove the effectiveness of hybrid model-based PHR service.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.99-112
• /
• 2015

Datum point for displaying location and altitude of point has being advantage usefully in various measurement parts. However, datum point has been increasing loss cases owing to weather changes and stratum changes and neglecting meaninglessly. In this paper, we design and implement a multi electronic measurement system monitoring software with functions such as include maximize utilization of existing measurement datum system as well as collected various environment data and detection stratum changes of surround area. Proposed software is implemented to support that reusability and extensibility of software using object oriented modeling method. Our software supports a GUI for electronic measurement datum point administrator as well as for web user and mobile user. Our system can support a graph GUI for various data analysis and reposition in realtime to database that measured location information and various sensing information to prevent loss of electronic measurement datum point and to detected stratum changes. In addition, we include a QR code and RFID recognition function. Finally, we suggest performance evaluation result to confirm stratum changes detection and GPS location error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.137-146
• /
• 2005

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Interface modules for communication between system buses and IPs are required, since many IPs employ different protocols. Automatic generation of these interface modules would enhance designer's productivity and IP's reusability. This paper proposes an automatic interface generation system based on FSM generated from the protocol description of IPs. The proposed system provides the library modules for the standard buses to reduce the burdens of describing the protocols for data transfer from/to standard buses. Experimental results show that the area of the interface circuits generated by the proposed system had been increased slightly by 4.5% on the average when compared to manual designs. In the experiment, where bus clock is 100 Mhz and slave module clock is 34 Mhz, the latency of the interface had been increased by 7.1% in burst mode to transfer 16 data words. However, occupation of system bus can be reduce by 64.9%. A chip designer can generate an interface that improves the efficiency of system bus, by using this system.