• Journal of Environmental Health Sciences
• /
• v.50 no.3
• /
• pp.181-190
• /
• 2024

Background: Air pollutants have been reported to have harmful effects on human health. Busan is a vulnerable area in terms of air quality due to the installation of various industrial complexes, particularly the port industry. However there is limited research data on the ambient air quality of residential areas near ports and industrial complexes. Objectives: This study aimed to determine the quarterly levels of air pollutants near industrial complexes and ports and to identify trends and characteristics of air pollutant exceedances. Methods: Air measurements were conducted quarterly. The measured air pollutants included O₃, SO₂, CO, NO₂, PM₁₀, and PM_2.5. PM₁₀ and PM_2.5 were measured using BAM-1020 equipment, while O₃, SO₂, CO, and NO₂ were measured using AP-370 Series equipment. The quarterly concentration levels of air pollutants were determined, and the influence of precipitation and commuting hours on fine particulate matter was examined. Analysis of variance (ANOVA) was conducted to determine if there was significance between the concentrations of fine particulate matter during commuting hours and non-commuting hours. Results: The concentrations of air pollutants were generally higher in the first and second quarters. Furthermore, the concentrations of PM₁₀ and PM_2.5 tended to decrease continuously following consecutive rainfall, with concentrations at the end of rainfall periods lower than those observed at the beginning. The frequency of exceeding average concentrations of PM₁₀ and PM_2.5 was higher on weekdays. Moreover, the average concentrations of PM₁₀ and PM_2.5 during weekday commuting hours were higher compared to non-commuting hours. Conclusions: The concentrations of air pollutants in the survey area were found to be higher than the overall average in Busan. Based on this study, continuous air quality monitoring is necessary for residential areas near industrial complexes and ports. For further research, health biomonitoring of residents in these areas should be conducted to assess their exposure levels.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.3
• /
• pp.258-268
• /
• 2024

We presented foundational findings regarding the occurrence and acoustic characteristics of the finless porpoise through passive acoustic and visual surveys conducted on the southern coast of Korea, specifically at Hadong Jungpyeong Port. Over a survey period spanning from July 8 to August 16, 2023, totaling 40 days, we observed peaks in the number of clicks produced by this species on July 15, July 24, August 4, August 11, and August 16. The highest count, totaling 18,924 clicks, was recorded on July 15th, while the lowest count, at 3,888 clicks, occurred on August 8th. Examining the acoustic characteristics throughout the diurnal cycle, we found that the peak activity in terms of DPM (detection positive minute for one hour), DP10M (DPM for ten minutes), and overall number of click sounds was observed between 05:00 and 08:00, with a secondary peak occurring from 17:00 to 18:00. The quietest period was noted between 23:00 and 02:00. Furthermore, there was a significant increase in the number of clicks from sunrise, with the maximum count of 21,581 clicks recorded at 6 AM. This count gradually decreased until noon, experienced a slight increase thereafter, peaked again at sunset, and then declined. The dominant frequency mode of this species was 126 kHz, with a concentration ranging from 112 to 136 kHz. The average duration of a click sound was 127 ㎲, with approximately 16 sinusoids (cycles) within each click sound and an average cycle length of approximately 7.9 ㎲. These findings from our study are anticipated to serve as foundational data for the development of a Korean pinger and acoustic warning system.

• Journal of Korean Academy of Nursing
• /
• v.25 no.2
• /
• pp.372-389
• /
• 1995

The frequency with which administration of chemotherapy for gynecological cancer treatment is used has increased along with the use of surgery and radiotherapy Among the various side effects of chemotherapy, stomatitis causes a problem of function and sensation in the oral cavity. This oral discomfort can be categorized into two components ; perceived oral symptoms and observed oral symptoms. If the oral problem continues, it may cause infection, bleeding and nutritional deficiencies. As a result of this condition, compliance with the treatment process can be affected as well as the prognosis for the cancer patients. But as the oral discorrfort usually appears after chemotherapy, it is often not reported to the health care personnel as a patient problem. Without problem identification of the oral discomfort and ability to assess the problem, effective intervention cannot be planned. Therefore, this study was conducted to identify the pattern and the degree of oral discomfort due to cancer chemotherapy and thus to provide data for identification of the patient problem and for nursing assessment. The design of this study was a longitudinal de-scriptive study The subjects were in - patients who received chemotherapy under the diagnosis of gynecological cancer between Mar. 15, 1994 and May 15, 1994 at a general hospital in Seoul, Korea. The number of subjects was 64 and they were divided into two groups, one of 41 (A : 5FU & Neoplatin), the other of 23(B : Neoplatin, Cytoxan, Adriamycin), according to the treatment regimen. The data were collected for 24 days using self-re-port instruments. The instruments were the 「Perceived Oral Symptom Assessment Tool」 and 「Observed Oral Symptom Assessment Tool」 developed by this researcher. Data were analyzed using the SPSS-PC program, ANOVA, t-test, paired t-test and the Pearson Correlation Coefficient were applied. The results of this study are as follows : 1. In A regimen the peak time for perceived oral symptom scores was the fifth day after chemotherapy, and the tenth day for observed oral symptom scores. Both of the problems started on first day of chemotherapy and were not resolved completely until the 24th day after treatment. 2. In B regimen, the peak time for perceived oral symptom scores was on the seventh day after chemotherapy, and the eighth day for observed oral symptom scores. It was noted that perceived oral symptom scores were higher than observed oral symptom scores consistently for 24 days. Both also started on first day of chemotherapy, and were not resolved completely until the 24th day after chemotherapy. 3. There were no differences statistically in perceived oral symptom scores between A and B regimen. The loss of appetite and xerostomia caused the most severe discomfort in both of these two groups. 4. The were no differences statistically in observed oral symptom scores between the A and B regi moil. In the A regimen, the highest observed symptom scores were the lips, gingiva, tongue and buccal membrane in that order. But in the B regimen, the highest observed symptom scores were tongue, lips, buccal membrane and gingiva in that order. 5. In A regimen, the patients who had gingival edema and dentures had significantly higher perceived oral symptom scores. And those who had gingival edema and bleeding, foul odor and aphthous stomatitis had significantly higher observed oral symptom scores. 6. In B regimen, the patients who had the experience of stomatitis in the last course of chemotherapy had significantly higher perceived oral symptom scores. Those who had gingival edema had significantly higher observed oral symptom scores. 7. In the A regimen there was no correlation between lab values for lymphocytes and albumin with perceived oral symptom scores and observed oral symptom scores. In the B regimen, there was a significant negative correlation between lymphocytes and albumin with the observed oral symptom scores, but not between perceived oral symptom scores and lymphocytes and albumin values. In conclusion, the nurse should expect that the patient undergoing chemotherapy will complain severely about subjective discomfort and before objective physical change is observed. Also the patients who have chronic oral problems such as dentures, gingival edema and bleeding, foul odor, aphthous stomatitis will complain of severe oral discomfort due to chemotherapy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.18 no.2
• /
• pp.89-103
• /
• 2013

National demands for the ocean forecasting system have been increased to support economic activity and national safety including search and rescue, maritime defense, fisheries, port management, leisure activities and marine transportation. Further, the ocean forecasting has been regarded as one of the key components to improve the weather and climate forecasting. Due to the national demands as well as improvement of the technology, the ocean forecasting systems have been established among advanced countries since late 1990. Global Ocean Data Assimilation Experiment (GODAE) significantly contributed to the achievement and world-wide spreading of ocean forecasting systems. Four stages of GODAE were summarized. Goal, vision, development history and research on ocean forecasting system of the advanced countries such as USA, France, UK, Italy, Norway, Australia, Japan, China, who operationally use the systems, were examined and compared. Strategies of the successfully established ocean forecasting systems can be summarized as follows: First, concentration of the national ability is required to establish successful operational ocean forecasting system. Second, newly developed technologies were shared with other countries and they achieved mutual and cooperative development through the international program. Third, each participating organization has devoted to its own task according to its role. In Korean society, demands on the ocean forecasting system have been also extended. Present status on development of the ocean forecasting system and long-term plan of KMA (Korea Meteorological Administration), KHOA (Korea Hydrographic and Oceanographic Administration), NFRDI (National Fisheries Research & Development Institute), ADD (Agency for Defense Development) were surveyed. From the history of the pre-established systems in other countries, the cooperation among the relevant Korean organizations is essential to establish the accurate and successful ocean forecasting system, and they can form a consortium. Through the cooperation, we can (1) set up high-quality ocean forecasting models and systems, (2) efficiently invest and distribute financial resources without duplicate investment, (3) overcome lack of manpower for the development. At present stage, it is strongly requested to concentrate national resources on developing a large-scale operational Korea Ocean Forecasting System which can produce open boundary and initial conditions for local ocean and climate forecasting models. Once the system is established, each organization can modify the system for its own specialized purpose. In addition, we can contribute to the international ocean prediction community.

• Korean Security Journal
• /
• no.33
• /
• pp.103-135
• /
• 2012

The object is that this research searches the relationship of the office given condition actual condition of the country important facility private security guard and job satisfaction degree. In order to grasp and analyze the real state of the country important facility private security guards directly, the questionnaire, that is the general measurement tool, was utilized and the guard whom it works in the airport, the port region and general work place, that is the national important facility of Busan and Ulsan area, was aimed at. The enough survey object was illustrated to the facility and person in charge in the security company and the item was previewed and the total 400 sheets was distributed and 331 sheets (82.8%) except the doubleness subject intention and incongruent questionnaire was utilized for the analysis. The statistic processing of collected data utilized the SPSS version 15.0 the statistical package program through data coding and cleaning process and performed the frequency analysis, reliability analysis, t-test, one way analysis of variance, Pearson analysis, and regression analysis. The relationship of the office given condition actual condition of the guard about the national important facility and job satisfaction degree was classified into the interpersonal relationship, task characteristic, office environment, and complement factor and the difference of the job satisfaction degree according to the general characteristic was verified. If the conclusion obtained through the method of study described in the above looked at, for as to general tendency, the low wages and poor field environment was continued. In the general characteristic, the man was higher than the excitation about the job satisfaction level. As there was lots of the age and the scholarship was low, the age was high. And as there was lots of the career and income, the police of a petition or search and guide staff was high and the job satisfaction degree in which relatively the employee and the other job group is high so that the case of being the former student incidence can be the poorest was shown rather than the facility security agent. As the interrelation analysis result job satisfaction was high, the change of occupation pseudo was low and the organizational commitment degrees was increased. The regression analysis result job satisfaction degree was exposed to reach the meaningful effect on the change of occupation pseudo and organizational commitment. It had an effect on the change of occupation pseudo as the task characteristic and office ambient level was low. It had an effect on the organizational commitment as the extend of satisfaction about the task characteristic and interpersonal relationship, complement, and office ambient level were high. If the research result of this time is integrated, the support of the political system including the interpersonal relationship thesis between top and bottom of the organized I and substantial complement actualization is urgently needed between the office given condition improvement effort in the country important facility defense manpower field and police of a petition and special guard.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.19-31
• /
• 2005

Purpose : To supply the information of EPID system and to analyze the possibility of substitution EPID for film dosimetry. Materials & Methods : With amorphous silicon(aSi) type EPID and liquid filled lonization chamber(LC) type EPID, the reproducibility according to focus detector distance(FDD) change and gantry rotation was analyzed, and also the possible range of image acquisition was analyzed with Alderson Rando phantom. The resolution and the contrast of aSi type EPID image were analyzed through Las Vegas phantom and water phantom. DMLC image was analyzed with X-Omat V film and EPID to see wether it could be applied to the qualify assurance(QA) of IMRT. Results : The reproducibility of FDD position was within 1mm, but the reproducibility of gantry rotation was ${\pm}2,\;{\pm}3mm$ respectively. The resolution and the contrast of EPID image were affected by dose rate, image acquisition time, image acquisition method and frame number. According to the possible range of image acquisition of EPID, it is verified that the EPID is easier to use than film. There is no difference between X-Omat V film and EPID images for the QA of IMRT. Conclusion : Through various evaluation, we could obtain lots of useful information about the EPID. Because the EPID has digital data, also we found that the EPID is more useful than film dosimerty for the periodical Qualify Assurance of IMRT. Especially when it is difficult to do point dose measurement with diode or ionization chamber, the EPID could be very useful substitute. And we found that the diode and ionization chamber are difficult to evaluate the sliding window images of IMRT, but the EPID was more useful to do it.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2007

The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 mm in diameter, 4 mm in thickness) of used materials were made and sample's CIE $L^*a^*b^*$ value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/$8^{\circ}$ viewing mode, 14.3 mm Port diameters, Hunter Lab USA) The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of $L^*$ lies between 80.40 and 52.70. The value of $a^*$ are between 10.60 and 3.60 and $b^*$ are between 28.40 and 2.21. The average value of $L^*$ is 67.40, and median value is 67.30. The value of $a^*$ are 2.89 and 2.91 respectively. And for the $b^*$, 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of $L^*$ is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of $a^*$ and is converted new number by 1.0 measured value. For the third digit $b^*$ is replaced and it is 2.0 measured unit apart. T555 was set to the value of $L^*$ ranging from 66.0 to 68.0, value of $a^*$ ranging from 3 to 4 and $b^*$ value ranging from 14 to 16.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.188-196
• /
• 2023

Among marine accidents caused by bad weather, visibility restrictions caused by sea fog occurrence cause accidents such as ship strand and ship bottom damage, and at the same time involve casualties caused by accidents, which continue to occur every year. In addition, low visibility at sea is emerging as a social problem such as causing considerable inconvenience to islanders in using transportation as passenger ships are collectively delayed and controlled even if there are local differences between regions. Moreover, such measures are becoming more problematic as they cannot objectively quantify them due to regional deviations or different criteria for judging observations from person to person. Currently, the VTS of each port controls the operation of the ship if the visibility distance is less than 1km, and in this case, there is a limit to the evaluation of objective data collection to the extent that the visibility of sea fog depends on the visibility meter or visual observation. The government is building a marine weather signal sign and sea fog observation networks for sea fog detection and prediction as part of solving these obstacles to marine traffic safety, but the system for observing locally occurring sea fog is in a very insufficient practical situation. Accordingly, this paper examines domestic and foreign policy trends to solve social problems caused by low visibility at sea and provides basic data on the need for government support to ensure maritime traffic safety due to sea fog by factually investigating and analyzing social problems. Also, this aims to establish a more stable maritime traffic operation system by blocking marine safety risks that may ultimately arise from sea fog in advance.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.147-152
• /
• 2016

This study was conducted to investigate the physicochemical quality properties and provide basic data for the activation of traditional Kamju of juice type product prepared by mixing malt and extruded rice collet powder. Malt extracts were prepared by extracting the mixture of malt and water at a weight ratio of 25:75 after soaking for 2 h at $45^{\circ}C$. Rice collet powder was prepared by adjusting the barrel temperature to $95^{\circ}C$, screw speed to $3.07{\times}g$, discharge port diameter to 7 mm and a raw material input to 50 kg/h, the powder was then ground to a particle size of 80 mesh. The physicochemical characteristics (pH, color, viscosity, reducing sugars, number of viable cells, free amino acids) and sensory evaluations were conducted at various time points during the saccharification and at different mixing ratios of the extruded rice collet powder to malt extract (5:95, 15:85, 25:75, 35:65, each at $55^{\circ}C$ for 9 h). As a result, with an increase in the proportion of the extruded rice collet powder and saccharification time, the physicochemical properties of traditional Kamju significantly improved (p<0.05). A mixing ratio of 35:65 rice collet powder to malt extract and a saccharification time of 9 h were found to be the most desirable conditions. However, based on the sensory evaluation, a mixing ratio of rice collet powder and malt extract of 25:75 and a saccharification time of 5 h resulted in the most preferable palatability of traditional Kamju (p<0.05). Therefore, the mixing ratio and saccharification time should be determined to provide a better choice with respect to the taste and economic aspects of traditional Kamju.